EN
Kenmore logo
Official user manual

Kenmore 116.29912

44 pages·4.2 MB·Vacuum Cleaner·PDF·ENDEFRITNLJA
Kenmore 116.29912
Table of Contents 60 sections Owner's Manual · Vacuum Cleaner · Model 116.29912 · LIMITED ONEYEARWARRANTY ON KENMOREVACUUM CLEANER · … ShowHide
Page 1 of the Kenmore 116.29912 user manual — Model 116.29912
Page 1 · click to enlarge
Page 1
Kenmore 116.29912 — Owner's Manual diagram (page 1)
Fig. 1 · Owner's Manual

Owner's Manual

Vacuum Cleaner

Model 116.29912

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com

Part No, CO1ZAUY10U00_8174834 Printed in U,SA

Page 2 of the Kenmore 116.29912 user manual — LIMITED ONEYEARWARRANTY ON KENMOREVACUUM CLEANER
Page 2 · click to enlarge
Page 2
Kenmore 116.29912 — LIMITED ONEYEARWARRANTY ON KENMOREVACUUM CLEANER diagram (page 2)
Fig. 2

HowYour Vacuum Works 14 Canister Care I4

Before Using Your New Vacuum 2 Kenmore Vacuum Cleaner Warranty 2

Bag Changing 14 Cleaning Exterior and Atlachments 15 Motor Safety Filter Changing i5 Exhaust Filter Changing 16

Assembly Instructions 6-7

Use 8 How to Start 8 Vacuuming Tips 9 Suggested Pile Height Settings 9 Dirt Sensor 10 Attachments 11 Attachment Use Chart 12 Performance Features 12-13

Power-Mate ® Care 16

Belt Changing and Agitator Cleaning o, 17-18 Light Bulb Changing 18 Agitator Servicing 19 Agitator Assembly 19

Troubleshooting 20 Requesting Assistance Or Service... 21

Please read this guide° It will help you assemble and operate your new Kenmore vacuum in the safest and most effective way.

For more information about vacuum cleaner care and operation, call your nearest Sears store. You will need the complete model and serial numbers when requesting information. Your vacu- um's model and serial numbers are located on the Model and Serial Number Plate°

Use the space below to record the model number and serial number of your new Kenmore vacuum.

Serial No.

Keep this book and your sales check (receipt) in a safe place for future reference.

LIMITED ONEYEARWARRANTY ON KENMOREVACUUM CLEANER

This warranty is for one year from the date of purchase, and includes only private household vacuum cleaner use. During the warranty year, when this vacuum cleaner is operated and maintained according to the owner's manual instructions, Sears will repair any defects in material or workmanship free of charge°

This warranty excludes vacuum bags, belts, light bulbs, and filters, which are expendable parts and become worn during normal use°

For warranty service, return this vacuum cleaner to the nearest Sears Service Center in the United States,

This warranty applies only while this product is in use in the United States. This warranty gives you specific tegal rights, and you may also have other rights which vary from state to state

Sears, Roebuck and Co,, DI817 WA, Heffman Estates, IL 60179

Model Noo · Date of Purchase

Page 3 of the Kenmore 116.29912 user manual — SAVE THESE
Page 3 · click to enlarge
Page 3
Kenmore 116.29912 — WARNING diagram (page 3)
Fig. 3

WARNING

Your safety is important to us.To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precau- tions including the following:

Read this manual before assembling or using your vacuum cleaner.

Do not operate the cleaner with a punctured hose. The hose contains electrical wires. Replace if cut or worn, Avoid picking up sharp objects

Use your cleaner only as described in this manual Use only with Sears recommended attachments_

Do not use with any opening blocked; keep free of dust, tint, hair and anything that may reduce air flow.

To reduce the risk of electrical shock - Do not use outdoors or on wet surfaces.

Keep hair, loose clothing, fingers, and all parts of body away from openings and mov- ing parts

Disconnect electrical supply before servic- ing or ctean[ng out brush area. Failure to do so could result in electrical shock or brush suddenly starting.

Do not use cleaner without dust bag and/or filters in place.

Always turn cleaner off before connecting or disconnecting the hose or Power-Mate _

Always change the dust bag after vacuum- ing carpet cleaners or freshener, powders and fine dust. These products clog the bag, reduce airflow and can cause the bag to

Always turn cleaner off before unplugging

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

burst. Failure to change bag could cause permanent damage to the cleaner.

Hold plug when rewinding onto cord reel. Do not a{Iow plug to whip when rewinding.

Do not use the cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc.

Do not use with damaged cord or plug If cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears Service Center_

They may damage the cleaner or dust bag.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not run cleaner over cord Keep cord away from heated surfaces

Do not use cleaner to pick up flammable or combustible liquids (gasoline, cleaning fluids, perfumes, etc.), or use in areas where they may be present. The fumes from these sub- stances can create a fire hazard or explo- sion,

Do not leave cleaner when plugged in. Unplug from outlet when not in use and before servicing.

Use extra care when cleaning on stairs. Do not put on chairs, tables, etc Keep on floor.

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

You are responsible for making sure that your vacuum cleaner is not used by anyone

Do not handle plug or cleaner with wet hands.

unable to operate it properly,

Do not operate without exhaust filter or exhaust filter cover installed. iNSTRUCTiONS

Do not put any objects into openings.

SAVE THESE

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your cleaner is intended only for household use_ Read this Owner's Manual carefully for important use and safety information. This guide contains safety statements under warning and caution symbols Please pay special attention to Lheseboxes and follow any instructions given WARNING statements alert you to such dangers as fire, electrical shock, burns and personal injury CAU- TION statements alert you to such dangers as personal injury and/or property damage

Page 4 of the Kenmore 116.29912 user manual — Power-Mate s
Page 4 · click to enlarge
Page 4
Kenmore 116.29912 — Power-Mate s diagram (page 4)
Fig. 4 · Power-Mate s

it isimportantto knowyourvacuumcleaner'spartsandfeaturesto ensureits properandsafe use.Reviewthesebeforeusingyourcleaner°

Part No. In Canada

In U.S.

Headlight Bulb 20-5240 596181

*--- Handle Quick Release Button

Power-Mate s

Model/Serlal Numbers _'_ k_ OnBottom) " 'RXA

Show 14 more labels / short text on this page
Item Part No, · Belt 20-5285 40110 · Telescoping Wand · Wand · Length Adjust Button · Belt · Flange "_ · Wand Swivel · Wand Quick "_ · Release Pedal _ · t_ndtens · (SomeModels)__ · Handle Release _ · (Some Models)
Page 5 of the Kenmore 116.29912 user manual — 20-50557C
Page 5 · click to enlarge
Page 5
Kenmore 116.29912 — HOSE diagram (page 5)
Fig. 5

HOSE

ATTACHMENTS

Power.Mate Jr,® (Some Models)

HandI-Mate Jr,® (Some Models)

can be kept in the accessory bag for garage use or other dirty areas.

CANISTER

Item

Part No. In U.S,

Part No. In Canada

Dust Bag Exhaust Filter

20-50557C

20_86882C

20-86883C

Bag/Hose Check (Some Models)

Motor Safety Filter (Behind Dust Bag)

Show 20 more labels / short text on this page
Electronic Touch Control · Crevice · Tool · Dustlng Brush · Fabric Brush · Handle · Floor Brush · Hose Swivel · 20-50557 · 20-86882 · 20-86883 · Exhaust Filter Cover · Motor Safety Filter · Exhaust Cover · Attachment · Rewind Bar · Canister · Cord · Hood · Bag Dust Bag
Page 6 of the Kenmore 116.29912 user manual — POWER-MATE s
Page 6 · click to enlarge
Page 6
Kenmore 116.29912 — E WARNING diagram (page 6)
Fig. 6

E WARNING

DO NOT plug into electrical supply until assembly is complete, Failure to do so could result in electrical

shock or injury.

i

Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List. Use this Fist to verify that you have received all the components of your new Kenmore vacuum. WAND -TELESCOPING

The wand length is adjustable and requires no assembly. To adjust, simpfy push down on the wand adjust button and slide

Wand Length Adjust Button

the upper wand to the desired

height.

The swivel, locat- ed on the Power-

Mate ®, allows you to turn the handle to the left side to reach farther under low furni- ture

PowerMate s

When adjusting the wand length you may have to hold the Power-

_. Wand Quick

hand or foot.

Release Pedal (Some Models)

POWER-MATE s

Insert wand into Power-Mate e until the wand

button snaps into place.

Show 12 more labels / short text on this page
Electrical Shock Hazard · Handle · t B · Telescoping Wand -- · Hand Above · This Tab · Wand Length AdJust · m m · Button · Wand Swivel · \ · Mate ®with your
Page 7 of the Kenmore 116.29912 user manual — HOOD AND COVER
Page 7 · click to enlarge
Page 7
Kenmore 116.29912 — HOOD AND COVER diagram (page 7)
Fig. 7

CANISTER

HOSE

1oOpen the canister hood.

1. Line up the hose latch tab and notch in canister hood and insert hose into canister until it
2. Check to see that the dust bag is properly instalted. See BAG CHANGING for instructions,
3. Check to see that the motor safety filter is properly installed See MOTOR SAFETY FILTER CLEANING for instructions.

HOOD AND COVER

To remove: Lift hose latch tab upward and pull up on hose.

It is normal for the canister hood and cover to come off when opened further than need- ed, Line up the hinge slots, insert them, and close the hood and/or cover to replace it.

2. Insert handle into wand until lock but-

ton snaps in place Be sure hose is Handle not twisted. Button ==

Never open canister hood with the cover open. This will help to prevent damage from occurring to the canister hood and!or cover.

'=' To remove: Handle _ Press handle Quick r-] v Release _ quick release (Some _ button and

To store: Disconnect hose from wands and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.

Cover Electronic Bag/Hose Chock

Show 9 more labels / short text on this page
snaps in place_ · Hose Latch · Tab · Notch__ · Storage · Hose · Latch Tab · Hood Release · Dust Bag
Page 8 of the Kenmore 116.29912 user manual — HOW TO START
Page 8 · click to enlarge
Page 8
Kenmore 116.29912 — HOW TO START diagram (page 8)
Fig. 8

HOW TO START

Personal Injury and Product Damage Hazard

o DO NOT plug in if switch is in ON position, Personal injury or damage could result,

  • The cord moves rapidly when rewinding, Keep children away and provide a clear path when rewinding the cord to prevent personal injury.

Pile Height Pedal (Some Models)

3. Lower wand from upright position by pressing on the handle release pedal E • CAUTION
  • DO NOT use outlets above counters° Damage from cord to items in surrounding area could occur_

DO NOT leave the Power-Mate ®

running in one spot in the upright position for any length of time. Damage to carpet may occur,

Cord Rewlnd 1. Pull cord out of canister to desired

length,, The cord will not rewind until

4. Select a pile height setting by pressing the small pedal on the rear of the Power-

Mate®° The pile height setting shows on the indicator. See SUGGESTED PILE HEIGHT SETTINGS.

bar is pushed.

ized outlet only one way. If the plug does not fit fully in the outlet, reverse the plugo If it still does not fit, contact a qualified electri- cian to install the proper outlet, Do not change the plug in any way.

2_ Plug the polarized power cord into a 120 Volt outlet located near the floor.

To rewindUnplug the cleaner, Hold

rewinding to pre- vent damage or injury from the moving cord. Push cord rewind barr

Show 4 more labels / short text on this page
Pile Height Indicator · Handle · the cord rewind · the plug while
Page 9 of the Kenmore 116.29912 user manual — ELECTRONIC TOUCH CONTROL
Page 9 · click to enlarge
Page 9
Kenmore 116.29912 — ELECTRONIC TOUCH CONTROL diagram (page 9)
Fig. 9

ELECTRONIC TOUCH CONTROL

CARPET High - turns on both the canister and the Power-Mate _ motors for HIGH

power and cleaning of most carpets,

5, Select an Electronic Touch

In order to get MEDIUM or LOW power level for carpet cleaning, you must press CAR- PET High button first, then press the desired lower power level BARE FLOOR High - turns on the canister motor only for HIGH power and cleaning of bare floors.

Control position on the handle

depending on the type of vac-

uuming you will be doing

Power Level MEDIUM - reduces the power of the canister motor only to the MEDIUM level for attachment cleaning of upholstery.

Power Level LOW - reduces the power of the canister motor only to the LOW level for attachment cleaning of curtains, blinds, etc_

OFF - turns off canister and Power-Mate _ motors.

P_gE_ LEVEL

Page 10 of the Kenmore 116.29912 user manual — WARNING
Page 10 · click to enlarge
Page 10
Kenmore 116.29912 — E • WARNING diagram (page 10)
Fig. 10

E • WARNING

Suggested sweeping pattern.

For best cleaning action, the Power-Mate _ should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the Power-Mate _ should be changed to point into the next section to be cleaned. This pattern should be continued across the rug with slow, glid- ing motions.

Personal Injury and Product Damage Hazard

DO NOT run over power cord with Power.Mate e. Personal injury or damage could result.

DO NO']" pull plug from wall by the power cord. If there is damage to the cord or plug, personal injury or property damage could result.

The hose swivel allows the hose to turn without moving the canister,, This is

Carpeted stairs need to be vacuumed reg- ularly.

helpful for cleaning in small areas. Check hose for twisting before pulling canister.

WARNING

Use care if canister is placed on stairs. If it falls, personal injury or property damage could result.

Use care if the Power-Mate ®and

wand is left in the upright position as it may tip over easily. Property damage can occur if tipped.

For best cleaning results, keep the airflow passage open,, Check each assembly area in HOW YOUR VACUUM WORKS occasion-

I!lUl!l"j'll , ii i1,1 .,,i , , i

ally for clog& Unplug from outlet before checking.

For best deep down cleaning, use the XLO setting However, you may need to raise the height to make some jobs easier, such as scatter rugs and some deep pile carpets, and to prevent the vacuum cleaner from shutting off Suggested settings are:

HI - Shag, deep pile, or scatter rugs.

MED - Medium to deep pile.

LO - Low to medium pile,

XLO - Most carpets and bare floors.

Personal Injury Hazard · Product Damage Hazard

Page 11 of the Kenmore 116.29912 user manual — Thelightsgive youanindicationof the amountofdirt particlesthat arepassing
Page 11 · click to enlarge
Page 11
Kenmore 116.29912 — Thelightsgive youanindicationof the amountofdirt particlesthat arepassing diagram (page 11)
Fig. 11 · Thelightsgive youanindicationof the amountofdirt par…

Thedirtsensorlightsystemismountedon thePower-Mate ®nozzleneartheresetbut- ton,Itconsistsof a seriesof threeredlights andonegreenlight.

1. Remove the

wands by press- ing the quick release pedal and lifting up on the wands

Thelightsgive youanindicationof the amountofdirt particlesthat arepassing

Dirt Sensor thru the sensor (Some Models) on its way to the dust bag INITIAL START UP

Ap_prox, 3 _ Inches or gOmm __L__.

When the Power-Mate _ is first started, the fol- lowing light sequences occurs in a two sec- ond time frame:

I. All three reds come on.

2. Two reds are on.
3. One red is on
4. One green is on and will remain on until the Power-Mate ® nozzle is placed in use.

2, As indicated by the illustration, the two dirt sensor elements are located on the inside of the swivel, approximately 3½ inches/90 mm down, (note the arrows). Each element should be cleaned periodically+ To reach the sensor elements, use a smalt brush such as a bottle brush+lBrush each sensor element several times to remove dust and dirt.

dirt on it, dirt wilt be picked up by the vacuum and one or more red lights might stay on. IN OPERATION

When the Power-Mate _ is being moved back

and forth on the floor, the lights will change from one configuration to another as more dirt or less dirt is being vacuumed+ As long as one or more red tights are on, dirt is passing through the wand to indicate that the surface still needs cleaning

When the green light stays on as the Power- Mate '_is moved back and forth over an area, the sensor is not seeing enough dirt to war- rant further cleaning of that area.

3. Reinstall the wands after cleaning the sen-

Never use water or any cleaning solution when cleaning the lenses. The residue of the water or cleaners

Although the dirt sensor feature in your Kenmore Power-Mate ® is designed for years of trouble free use, the passage of dirt through the air passage system can coat the fens causing the green light to come on and stay on - never switching to red+ When this happens the lens must be cleaned_

will accelerate the recoating of the lenses and make cleaning necessary sooner,

Cross Section View · Sensor Elements · sots,

Page 12 of the Kenmore 116.29912 user manual — iiii HANDLE
Page 12 · click to enlarge
Page 12
Kenmore 116.29912 — ATTACHMENTS ON WANDS diagram (page 12)
Fig. 12

!

ATTACHMENTS ON WANDS

SOME MODELS

DO NOT attach or remove handle or wands while cleaner is ON. This

1. To remove wands from Power-Mate s, lock wands in straight-up

could cause sparking and damage the electrical contacts,

iiii HANDLE

ATTACHMENTS ON

,'_- Handle attached, turn Lock cleaner off Button --_i before remov- ing handle from wands,

2. Press wand quick release pedal with foot and pull the wands straight up out of Power-Mate_.,
1. Press lock button, then pull to remove '=' handle from wand,

='= _ Quick Release Pedal

The Power-Mate e plug and cord do not have to be removed to use attachments on the wands,

Ifyour model handle release,

has the optional feature of a press it in similarly,

3. Put attach-ments on
2. Slide attach-

needed, See ATTACHMENT --, USE.

ments firmly on handle as need- ed, See ATTACHMENT USE.

position, · _ Wand · wands as

Page 13 of the Kenmore 116.29912 user manual — WARNING
Page 13 · click to enlarge
Page 13
Kenmore 116.29912 — CLEANING AREA diagram (page 13)
Fig. 13

CLEANING AREA

ATTACHMENT

X**

Power'Mate_ Handi':"MateJr?

Power-Mate Jr? (Some Modefs)**"

*Alwaysclean attachments before using on fabrics ** 3-way OntOff switch shouid be in FLOOR position *** Handi-Mate Jr ®and Power-Mate Jr ®attachment instructions are includedwith the products NOTE: When separating wands, depress lock button completely before pullingwands apart. If wand lock button is difficult to depress push the two wands more tightly together to line up the lock button with the hole. Depress lock button and then pu wands apart,

EDGE CLEANER SUCTION CONTROL

Active brush edge cleaners are on both sides of the Power- Mate_, Guide either side of the Power-

The suction control allows

you to change the vacuum suction for different fabric Suction Suction

Mate _ along base= boards or next to furniture to help remove dirt trapped at carpet edges.

and carpet weights. Opening the control decreases suction for draperies and lightweight rugs, while closing the control increases suction for upholsteries and carpets.

OVERLOAD PROTECTOR

The Power-Mate ®has built-in protection against motor and belt damage should the agitator jamo If the agitator slows down or stops, the overload

Overload Protector Reset Button

WARNING

Always unplug the vacuum cleaner before cleaning the agitator area as brush may suddenly restart. Failure to do so can result in personal injury.

protector shuts off the Power-Mate s, The canister motor will continue to run,

To correct problemTurn off vacuum, remove obstruction, then press reset button,
To resetPush in the overload protector button
Show 13 more labels / short text on this page
Between · Bare Stairs Floors · Carpeted · Furniture* · Cushions* Drapes* · Floors/Rugs Walls · Dusting Brush · Crevice Tool · Fabric Brush · Floor Brush · (Some Models) · {Some Models)**" · Personal Injury Hazard
Page 14 of the Kenmore 116.29912 user manual — THERMAL PROTECTOR
Page 14 · click to enlarge
Page 14
Kenmore 116.29912 — ELECTRONIC BAG/HOSE CHECK INDICATOR diagram (page 14)
Fig. 14

ELECTRONIC BAG/HOSE CHECK INDICATOR

To reset: Turn off and unplug the vacuum from the outlet to allow the vacuum to coot. Check for and remove any clogs, Also check and replace any clogged filters.Wait approximately 50 minutes and plug the vacuum in and turn back on to see if the

SOME MODELS

on whenever the airflow becomes blocked, dust bag needs changing or canister safety filter needs clean-

thermal protector has reset. In some cases, the unit may suddenly restart. DO NOT leave unattended.

POWER-MATE d STORAGE

ing.

SOME MODELS

has a "U" shaped flange in the area where the

In some cases, when vacuuming loose fibers, like new carpet lint, the bag may be full and the light may not come on.

power cord attaches. The base has a "U"

In some cases, when vacuuming fine materi- als such as powder, soot, plaster dust, carpet freshener, the bag may not appear full but the light does come on.

shaped slot near the front caster.

The slot allows the wands and Power-Mate _ to be stored with the canister to conserve stor-

AUTO POWER DOWN MODE

If vacuuming is continued after the light comes on, the canister motor will automati- cally change speed to MEDIUM and/or LOW to protect the motor from excessive heal

age space. The canister must be stored on end for this feature to be used.

The wand will s_ip out of the slot as it is lifted up for use and will slide into the slot as it is lowered for storage.

1, Auto power down mode occurs when there is a blocked airflow passage.

The Power-Mate e must be in the fiat position as shown in the illustration. Use the handle

2. Auto power down mode occurs when the bag is full.

release pedal to place it in this position.

Removal of blockage andtor bag replacement will allow you to return to the seiected power level.

Further vacuuming after the light stays on may cause the canister motor to shut off. Wait up to 50 minutes for motor to cool and automatically reset°

THERMAL PROTECTOR

To prevent tip over, never leave ® Power-Mate on or m the upright position with the wand fully extended. Moving the wand to a lower position and turning the handle to one side will make the Power-Mate d more stable and less

This vacuum has a thermal protector which automatically trips to protect the vacuum from overheating The thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum.

likely to tip over.

Show 5 more labels / short text on this page
The light comes · Electronic Bag/Hose · Check_ · The lower wand · Refer to TROUBLESHOOTING
Page 15 of the Kenmore 116.29912 user manual — 10. Reinstall hose. ! cAUTIoN
Page 15 · click to enlarge
Page 15
Kenmore 116.29912 — BAG CHANGING diagram (page 15)
Fig. 15

The vacuum cleaner creates suction that

picks up dirL Rapidly moving air carries the dirt to the dust bag through the airflow pas- sages. The dust bag lets the air pass /)

through, while it traps the dirt. iSF ",4

For best cleaning results, keep the airflow /// 1 passage open° Check the starred areas /_#,,/ occasionally for clogs. Unplug from outlet ,Z_7 before checking ,,_7 Motor Safety Filter Exhaust \ Filter

BAG CHANGING

7. The red bag mount will flip forward after removing bag. This will prevent the lid from closing unlit a new bag is installed.

For best cleaning results, the dust bag should be changed often, The electronic/ mechanica! baglhose check indicator wi!l come on when the bag needs to be changed or the airflow is blocked, NOTE: See PARTS AND FEATURES for Bag Number.

8. Rotate red bag mount down and

install bag into slots per instructions

1. Unplug cord from wall outleL

pushing down until the cardboard tab locks into position and the holes

2, Remove hose from canister.

align. Tuck the bag securely into the bag cavity so that none of it is able to be pinched by the hood.

3. Pull hood release

out and up, then tiff canister hood.

9. Close and latch canister hood°
4. Disengage cardboard tab from

10. Reinstall hose. ! cAUTIoN

red bag mount by pulling away and lifting up

& Pull bag out of the red bag mount.

NEVER REUSE A DUST BAG, Very fine materials, such as carpet fresh- ener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor. Change bag more often when vacuuming these materi- als.

6. Check and

replace, if necessary, the motor safety filter

Safe Fllter ,.I--/ ///,

_ed Bag Mount

Page 16 of the Kenmore 116.29912 user manual — !
Page 16 · click to enlarge
Page 16
Kenmore 116.29912 — ........ "' # N CAUTIO diagram (page 16)
Fig. 16

E

1, Unplug cord from wall outleL DO NOT drip water on cleaner.

"' # N CAUTIO

2, Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry, Wipe dry after cleaning.

Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on other

3oTo reduce static electricity and dust build- up, wipe outer surface of cleaner and attachments.

surfaces until they are washed,They could leave marks.

I I 11111, _1 ii1,111,1=,,i,1,,i' , i

Check motor safety filter occasionally and

change when dirty. !.13

1. Lift the rubber

retainer and pull out motor safety filter as shown. fA\" f

i/M ,,

Unplug power cord from electrical outlet. Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.

2. Replace the filter, white side out, by sliding it back into place under the ribs in the bag

Remove the bag as outlined in the BAG CHANGING section°

cavity. Tuck filter in so that it fits com-

MOTOR SAFETY FILTER ELECTROSTATIC

pletely under the rubber retainer,

This white and grey filter must be replaced when dirty It should be replaced regularly depending on use conditions, The filter CANNOT be washed as it will lose its

3. Replace the bag as outlined in the BAG CHANGING section.

!

,i CAUTION

dust trapping ability.

NEVER REUSE A DUST BAG. Very fine materials, such as carpet fresh- ener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor, Change bag more often when vacuuming these materi- als.

Electrical Shock Hazard

Page 17 of the Kenmore 116.29912 user manual — , ,' 'IHHI
Page 17 · click to enlarge
Page 17
Kenmore 116.29912 — i ii iiii EXHAUST FILTER HEPA diagram (page 17)
Fig. 17 · i ii iiii EXHAUST FILTER HEPA
2. Slightly push the exhaust filter

cartridge to the side, as shown in the illustration,

Fire and/or Electrical Shock Hazard

Do not operate with a clogged exhaust filter or without the exhaust filter or exhaust filter cover installed.

and pull up to remove.

i ii iiii EXHAUST FILTER HEPA

3. Replace the ._,,,_\\ exhaust filter carq=,,| tridge, carefully Exhaust positioning it so Filter. that the side shown in the illustration goes down under the

The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered evenly. The filter CANNOT be washed as it will lose its dust trapping ability.

ribs. Then push the other side

down until it snaps into place,. Place the new filter into the motor cover with the grey

1. Pull up on the exhaust filter cover to remove from the motor cover

Exhaust _ _ I Filter =./" J

edge down.

4. Replace the exhaust filter

Exhaust_"_-._

cover by engag- ing the two tabs on the rear and

To.

pushing down in front until it

Always follow alt safety precautions when cleaning and servicing the Power-Mate ® .! ,, ,i i,i1,,, WARNING

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec-

trical shock or personal injury from cleaner suddenly starting.

, ,' 'IHHI

Show 4 more labels / short text on this page
Exhaust · and lay aside° · Filter Cove__ · snaps closed_
Page 18 of the Kenmore 116.29912 user manual — iMPORTANT
Page 18 · click to enlarge
Page 18
Kenmore 116.29912 — TO REMOVE BELT i diagram (page 18)
Fig. 18 · TO REMOVE BELT i

TO REMOVE BELT i

1. Turn PowerMate e upside down,

When you remove the end caps, a small metal washer on each end

2. Unscrew the

may come off, DO NOT lose these two metal washers.

u TO CLEAN AGITATOR

screws.

3, Turn Power- Mate ® right side up Press handle release pedal and lower the swivel,

The agitator must also be cleaned accord- ing to the following schedule:

Lift rear latches up

Vacuum Use Clean Agitator

HEAVY - every week (used daily)

4. To remove cover, grasp the sides and pull out.

MODERATE - every month (used 2-3 timeslweek)

LIGHT -

(used 1 timelweek) every 2 months

Remove any dirt or debris in the belt path area or in the brush roller area.

5. Depress tabs on rear of

agitator cover and rotate forward to release from the Power-Mate _ base.

Carefully remove any string or debris located on the agitator, end caps, wash- ers or agitator shaft.

iMPORTANT

the end caps. See the explod- ed view for cor- rect

6oLift agitator assembly out and remove worn belt.

assembly.

7. Slide end

Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build- up frequently in the Power-Mate e agitator and end cap areas_ If build-up becomes excessive, disconnect Power-Mate ® from wand and follow the steps below.

caps off to check

and clean end cap areas° See AGITATOR ASSEMBLY for

picture of complete agitator assembly End Cap

Show 8 more labels / short text on this page
two (2) Power- · Mate _ cover · Tabs · Agitator · Covet · washers and · Replace the · End Cap
Page 19 of the Kenmore 116.29912 user manual — i ' io
Page 19 · click to enlarge
Page 19
Kenmore 116.29912 — TO REPLACE BELT diagram (page 19)
Fig. 19

5, Line up front of cover and base_ Rest cover on

TO REPLACE BELT

1, Slide washers and end caps onto agitator assembly,

base as shown, Cover Base

2. Install new belt over motor drive, then over brush sprocket.

i ' io

:::::3 Top View

In Canada, #20-4097& End Cap

3, Place agitator assembly back into Power-Mate ® ,

6. NOTE: On dirt > sensor models be sure that the board is upright and the wires are

tucked back as k4 shown.

4. Reinstall

agitator cover by lin- ing up the front tabs and slots and rotating

7, Rotate cover back, Press cover

firmly until side and rear tabs snap into placer Turn Power-Mate ®

downward until the latches

upside down and replace two (2)

snap into place.

:[

3. Push in and turn bulb clockwise, to replace° Bulb must not be higher than
1. Remove Power-Mate e cover as shown in

BELT CHANGING AND AGITATOR CLEAN- ING section.

15 Watts (130 Volts),

2. Push in and turn bulb counterclock-

wise, then pull out to remove.

4. Reinstall Power-Mate e cover as shown in BELT CHANGING AND AGITATOR CLEANING section,
Show 6 more labels / short text on this page
front edge of · Motor Brush Drive · _o · rim · Agitator Cover · PUSdhTnurn I
Page 20 of the Kenmore 116.29912 user manual — TO CHECK AGITATOR ASSEMBLY
Page 20 · click to enlarge
Page 20
Kenmore 116.29912 — TO REPLACE AGITATOR ASSEMBLY diagram (page 20)
Fig. 20

TO REPLACE AGITATOR ASSEMBLY

,, i ii, WARNING

1, Remove Power-Mate ® cover, agitator cover, belt and agitator assembly. See "To Remove Belt" in BELT CHANGING AND AGITATOR CLEANING.

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit° Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.

2. Remove end caps, washers, screws, end brush, and brush sprocket pieces from ends of old agitator assembly

3, Reassemble agitator assembly. To line up screw holes in dowel, sprocket and end brush, be sure all of the brush sprocket pieces align properly. See AGITATOR ASSEMBLY,

TO CHECK AGITATOR ASSEMBLY

4. Reinstall belt, agitator assembly, agitator cover and Power-Mate ® cover. See "To

level of the base

support bars, repface the agitator assembly. Base Support Bars

replace belt" in BELT CHANGING AND AGITATOR CLEANING.

are worn to the

End Cap Agitator Unit

Show 7 more labels / short text on this page
__ When brushes · End Brush · End · Screw · Screw · Washer · Brush Sprocket
Page 21 of the Kenmore 116.29912 user manual — TO REPLACE AGITATOR ASSEMBLY
Page 21 · click to enlarge
Page 21
Kenmore 116.29912 — TO REPLACE AGITATOR ASSEMBLY diagram (page 21)
Fig. 21

Review this table to find do-it-yourself solutions for minor performance problems. Any ser- vice needed, other than those described in this owner's manual, should be performed by an authorized Sears Service Center.

,u i iiiii iiiii1,,i ir i

i I i i,i1,1,,,i i iii ii1,111,111 I!'llllp

Cleanerwon't start 1_ Unpluggedat walloutlet. 1, Plugtn firmly,pushON/OFFsw_lchto ON 2, Trippedcircuitbreaker/blownfuse 2. Resetcircuit breakerer replacefuse at householdservice panel 3. Loosehose electrical connections. 3. Reconneclhose ends,(page7).

1, Fullor cloggedduelbag 1, Changebag, (page 14) Poor Job of dirt

2 Clear airflowpassages,(page 14) 3 Change filters.(page 15-16) 4. Adjust setting,(page 9). 5, Adjust conlreL(page 12) 6. Repiacehose 7, Change agitator.(page 19), 8 & g. See BELTCHANGINGAND AGITATOR CLEANING,(pagest7-18) 10.

2 Cloggedairflow passages 3 Dirtytigers 4. Wrongptle heightsetting 5. Opensuctionconh-o[ 6_ HoleIn hose 7. WornPower*Mate_ agitator 8. Wornor broken belt 9 Dirty agitatoror end caps

Canisler hood open. 10.

Close andlalch hoed.

Cleanerstarts but cuts off.

Hoseor hood electricalconnections 1- Trippedoverload pro_ectorin 2_ Power-Mated

Check connections,reconnecthess ends,(page 7) Removeany items that maybe caught er tammed,then reset If ciesner starts end stops again,clean agitatorand endcaps, Ihen reset.(pages 12. 17-18), 3. Turnoff and unplugthevacuumtrameuUetand waitappreximalefy50 minutesand ptugthevacu- um in,turnback on to seeif the protectorhas

3 Trippedoverload protector

reseL(page 13) Changedust bag, clear airflow blockage,(page 12)

Power*Mate=wgl not run when attached,

I, Power-Mete= conneclione unplugged 2, Worn orbrokenbail 3 Dirtyegltafer orend cape 4. Trippedoverload protector in Power.Male=

1, Plugin firmly,(page6)

See BELTCHANGINGAND AGITATOR CLEANING,(pages 17-18} Check agitatorareaforexcessivelint build-uporjammingClean agitatm"end end caps,thenreseL(pages12. 17-1B)

5. Switchnet in CARPETpasiliono 5.

Moveswitch te CARPETposition. (page8).

Checkfor clogsIn air passages,(page 14) Cleantenses,(page 10)

Constantgreentight on in dirt sensor,

"t Dirt passageIs c!ogged 1 2 Lenses aredirty 2,

Any.some. or all red lights in dirt sensorburn and never turn green.

1 Dirt passageIs clogged 1,

Checkfor clogstn air passages.(page t4)

No greenor red dirt sensorIlghts.

1 Swilch not In CARPETposition 2, No powerIo sensor board_

1- MoveswitchIo CARPETpesilion. (page 8) 2. Taketo your neareslSearsServiceCenter.

Electronic/Mechanical BaglHoseCheckIndicator eettvelea

1 Ful! or cloggeddust bag 2. D_rtyfilters 3 Blockedairflowpassage 4 Certainattachmenttools

1, Change beg.(page 14). 2, Change filters,(page 15-16) 3 Clearblockagefromairflowpassage (page 14) 4 This is normal Lightshould ge off when tool is removed.

1. Wrong pile height selling !_ 2 Suclientee strong 2

Cleaner picks up moveable rugs .or- Power-Mate _

1, Burned out I_ghl bulb,

1. Changelight bulb,(page 18).

I Dirty power cord 2 Cord jammed

1. Clean the power cord 2 Pull out cord and rewind

Cleanerleaves markson carpet

1 Wrong vacuuming pattern

1. See VACUUMINGTIPS, (page 9)
Show 10 more labels / short text on this page
pick-up · 2, · in canister · 2&3, · 4, · Adjust selling,(page9) · OpensuctioneonlreL(page 11) · pushes too hard, · Light won't work, · Cord won't rewind,
Page 22 of the Kenmore 116.29912 user manual — HomeCentral®J
Page 22 · click to enlarge
Page 22
Kenmore 116.29912 — 1-800-366-PART diagram (page 22)
Fig. 22

For repair of major brand appliances in your own home ... no matter who made it, no matter who sold it!

1-800-4-MY-H OM E® Anytime,day or night

(1-800-469-4663) (U.S A and Canada)

www.sears.com www.sears,ca

For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the nearest Sears Parts and Repair Center.

1-800-488-1222 Anytime, day or night (USA. only)

www.sears,com

For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, call Sears PartsDirectSM!

1-800-366-PART

6 a.m. - 11 pro., 7 days a week (U S.A. only)

wwwosears.comipartsdirect

To purchase or inquire about a Sears Service Agreement or Sears Maintenance Agreement:

1-800-827-6655 (USoA,) 1-800-361-6665 (Canada)

7 a m. - 5 p.m_,CST, Mort - Sat. 9 a mo- 8 p.m EST, M - F,4 pm SaL

Para pedir servic_o de reparaci6n a

Au Canada pour service en fran£:ais:

domidiio, y para ordenar piezas:

WWW sears.ca

HomeCentral®J

@Sears, Roebuck and Co

® Registered Trademark t "rMTrademark / sMService Mar!{ of Sears, Roebuck and Co

® Marca Registrada/TM Marea de F_brfca / su Marca de Servicio _e Sears, Roebuck and Co _c Marque de commerce / _ Marque depos_e de Sears, Roebuck and Co,

Show 5 more labels / short text on this page
(1-800-366-7278) · 'I-800-LE-FOYER Mc · 1-888*SU-HOGAR su · (1-800-533-6937) · (1-888-784-6427)
Page 23 of the Kenmore 116.29912 user manual — Sears, Roebuck and Coo, Hoffman Estates, IL 60179 U.S.A. www.sears.com
Page 23 · click to enlarge
Page 23
Kenmore 116.29912 — Manual Del Propietario diagram (page 23)
Fig. 23 · Manual Del Propietario

Manual Del Propietario

Aspiradora

Modelo 1!6.29912

CUIDADO:

Lea y sigue todas las instrucciones de operaci6n y seguridad antes det uso de este producto,

Sears, Roebuck and Coo, Hoffman Estates, IL 60179 U.S.A. www.sears.com

Pieza NOCO1ZAUY10UOO-8174834 Impreso en EUA

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Kenmore 116.29912

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Kenmore 116.29912

Be the first to ask — other owners or our team will answer.

Original document

Kenmore 116.29912 manual PDF

44 pages·4.2 MB·Vacuum Cleaner·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…