Instruction/ maintenance manual of the product B9272 Kawasaki
Go to page of 20
Please read this manual and save it with your original sales receipt. T ools needed for assembly: Phillips Screwdriver , Hammer and Adjustable Wrench (all not included); Cap Nut Assembly T ool (included). Use only with a Power Wheels ® 12 V olt Battery with Built-in Thermal Fuse and a Power Wheels ® 12 V olt Charger (both included).
T able of Contents Important Information A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B W arnings and Caution . . . . . . . . . . .
CAUTION • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only . W ARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas.
Rear Wheel - 2 Note: Rear Wheels are wider than Front Wheels. Handlebar Parts C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store.
Parts Diagram D 1. V ehicle 2. Handlebar 3. Right Grip (with Large Hole) 4. Front Wheel - 2 5. Hubcap - 4 6. Cap Nut - 4 7. Seat 8. 12 V olt Battery 9. Rear Axle 10. Bushing - 2 11 . 12 V olt Charger 12. Rear Wheel Driver - 2 13. Rear Wheel (Wide) - 2 14.
About Thermal Fuses Y our Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe.
• Fit a .437 cap nut onto one end of the rear axle. •T ap the other end of the rear axle with a hammer to secure the cap nut on the end of the rear axle. Hint: Y ou may want to position the cap nut on a scrap block of wood to protect the assembly surface.
Assembly 8 • Fit a cap nut on the end of the rear axle. • Fit the cap nut assembly tool over the cap nut. T ap the end of the cap nut assembly tool with a hammer to secure the cap nut on the end of the rear axle. Pull on the rear wheel to be sure it is secure.
Assembly 9 • Slide the other steering linkage over the hooked end of the steering column and the other steering linkage. • Fit the hooked end of the steering column into the hole in the steering linkage. 8 • Slide a washer onto the end of the steering column.
Assembly 10 •T urn the vehicle upright. Note: The left and right grips are not interchangeable! The hole in the left grip is smaller than the hole in the right grip. • Fit the left grip on the end of the left handlebar . • Fit the right grip on the end of the right handlebar .
9 Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: •W ash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
IMPORT ANT! Use only a Power Wheels ® 12 volt battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time.
Battery Care and Disposal •Y our Power Wheels ® battery is a sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner .
T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury .
Reverse • Press the DRIVE button on the tank. • Press the foot pedal. The vehicle drives forward at a maximum of 2 1 / 2 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forward in low speed.
IMPORT ANT! T o avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. How to Operate Y our V ehicle Statement of Limited W arranty M 16 High Speed T wist Grip to Activate High Speed •T urn the right grip to shift the vehicle into high speed.
Problem Possible Cause Solution V ehicle does not run Undercharged battery Charge the battery . A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
V ehicle was running but Loose wire or loose connectors Check all wires and connectors. Make sure the motor suddenly stopped harness connector is tightly plugged into the battery , and that there are no loose wires around the motors. T ripped thermal fuse Each Power Wheels ® 12 volt battery has a built-in thermal fuse.
V ehicle runs sluggishly (cont.) Battery needs charging Be sure to charge the battery after each use. Battery is old and will not accept Even with proper care, a rechargeable battery does not accept full charge last forever . Average battery life is 1 to 3 years depending on vehicle use and use conditions.
IMPOR T ANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to … ✔ Charge the battery immediately after each use. ✔ Charge the battery once a month during storage, even if the vehicle has not been used.
An important point after buying a device Kawasaki B9272 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kawasaki B9272 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kawasaki B9272 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kawasaki B9272 you will learn all the available features of the product, as well as information on its operation. The information that you get Kawasaki B9272 will certainly help you make a decision on the purchase.
If you already are a holder of Kawasaki B9272, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kawasaki B9272.
However, one of the most important roles played by the user manual is to help in solving problems with Kawasaki B9272. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kawasaki B9272 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
