Instruction/ maintenance manual of the product UFS 733sw Kathrein
Go to page of 76
Operating Manual - English - DVB-SA T Receiver UFS 733si/sw.
2 FOREWORD/IMPORT ANT INFORMA TION Dear customer , This operating manual is intended to help you make the fullest use of the extensive range of functions offered by your new satellite receiver . We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise as possible.
3 IMPORT ANT INFORMA TION Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE EUROPEAN P ARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used electrical and electronic appliances, it must be disposed of properly .
4 CONTENTS Foreword/important information ............................................................................................... 2 Important Information .........................................................................................
5 CONTENTS Deleting a channel from favourite list .......................................................................................... 45 Sorting channels in favourite list ........................................................................
6 The UFS 733 receiver is suitable for the reception of digital satellite TV and radio channels. The decoding system for Conax is already integrated. In addition one Common Interface for a CA module is provided for decoding additional Pay-TV channels.
7 SAFETY INSTRUCTIONS DANGER! W ARNING! CAUTION! GB 3 Safety Instructions – Important Information This page contains important information about the operation, installation location and connection of the unit. Read these instructions carefully before starting to use the unit.
8 CONNECTION AND SETUP The following section is intended speci fi cally for specialist dealers. Y ou need not refer to this section unless you are carrying out the installation yourself. The “Connection Example” section provides a sample con fi guration.
9 CONTROLS, DISPLA YS AND CONNECTIONS This section provides a brief description of all the controls, displays and connections. Front panel controls and displays 1. On/Off switch 2. Display (cover folded down) 3. Smartcard reader* ) (Conax embedded) 4.
10 REMOTE CONTROL REMOTE CONTROL FUNCTION BUTT ONS (Red) Open favourite list, open timer list in the EPG (cursor buttons) Switch the channel and/or navigate the menus Mute on/off " (Y ellow) Open options menu .
11 FIRST INST ALLA TION Before using your unit for the fi rst time, read the “Safety Instructions” and “Connection and Setup” sections. The “Connection Example” section provides a sample con fi guration. Do not connect the receiver to the power supply until all installation work has been properly carried out.
12 FIRST INST ALLA TION Press the buttons to select the desired country . Press the buttons to switch to the “HD V ideo Resolution” line. Set the video resolution of your TV set here using the buttons (only on connection of the receiver and the TV set using the HDMI interface).
13 Select the required setting for your LNB control using the buttons (only on connection of the receiver to a satellite reception system). The following options are available: - DiSEqC™1.
14 If you do not know the settings or components used in your reception system, ask a specialist engineer! FIRST INST ALLA TION (DISEQC™1.0) DISEQC 1.0 Press the buttons to switch to “DiSEqC sequence”. Select how often the DiSEqC TM command is to be sent using the buttons.
15 FIRST INST ALLA TION: Single-cable system (general) Use the buttons here to select “One Cable” as “LNB control”. Press the button to move to the next menu item: Satellite selection Press the button.
16 Select the “New registration” line using the buttons. Using the buttons, select whether the registration on the single-cable system is to be “Automatic” (receiver) or “Manual” (user).
17 FIRST INST ALLA TION: Single-cable system (automatic) AUTOMA TIC Secure channel with PIN (only for on selection of “User de fi ned” or “Kathrein EXU 908”): Press the button to switch to the “Secure channel with PIN” line. Here it is possible to protect the transmission frequency used by entering a PIN.
18 MANUAL Connected equipment: Select the single-cable components used in your system using the buttons. Available options: Kathrein 2 subscribers (EXR 552), Kathrein 4 subscribers (EXR 501, EXR 551), Kathrein 8 subscribers (EXR 1581, EXR 2581, EXU 908) or User de fi ned (UAS 481).
19 T esting connection: Use the button to switch to the “T est connection” line and press the button. The receiver now tests the settings you have made. The following message appears: Press the button to con fi rm. Press (if necessary several times) the ! (green) button until you reach the “Channel list selection” point.
20 FIRST INST ALLA TION (NO LNB POWER) Press the buttons to switch to the “Position A”. Press the button to open the sub-menu. Y ou can select a satellite and make the related settings here. Press the ! (green) button. If you change the default setting (in this example “ASTRA 19.
21 NO DISEQC FIRST INST ALLA TION (NO DISEQC) Press the buttons to switch to the “Position A”. Press the button to open the sub-menu. Y ou can select a satellite and make the related settings here. Press the ! (green) button. If you change the default setting (in this example “ASTRA 19.
22 FIRST INST ALLA TION (T ONEBURST) TONEBURST Press the buttons to switch to the “Position A”. Press the button to open the sub-menu. Y ou can select a satellite and make the related settings here. Press the ! (green) button. If you change the default setting (in this example “ASTRA 19.
23 FIRST INST ALLA TION (SEARCH) Use the buttons to select whether you want the search to cover all satellites or only one speci fi c satellite.
24 FIRST INST ALLA TION (SEARCH) If you do not have a meter for adjusting your re fl ector , you can use the sat fi nder as an alignment aid. Y ou can select the different lines using the buttons. Make changes in the lines using the buttons (e.
25 After completion of the search, you will see the following window: Press the button to con fi rm the message displayed. The channels found are saved and the next menu opens: FIRST INST ALLA TION (SEARCH) Press the button to acknowledge the display and fi nish the fi rst installation.
26 USING THE REMOTE CONTROL Press the button to con fi rm settings in the menus or to open sub-menus. Change the settings line by line and press the button to save your changes. Press the button to quit the menu or to switch from a sub-menu to the next higher menu level.
27 CHANNEL SELECTION FROM THE CHANNEL LIST Open the currently selected channel list/favourite list by pressing the button. The following display appears (example): A channel newly found by a search is marked with an “N” after the channel name (see example below).
28 Select the required channel using the buttons and press the button. OPERA TION BANNER When you switch channels the following information is displayed on-screen: Channel location an.
29 OPERA TION When using Videotext via the receiver remote control: Y ou can open the required Videotext page using the number pad. Y ou can scroll forward or back one page using the buttons. Pressing the button again renders the T eletext display transparent.
30 OPENING THE EPG The EPG is opened by pressing the button. Each time the EPG is opened, you will automatically be shown the “Current” view , irrespective of which view you were shown the last time you left the EPG.
31 Selection options: - (red) button Open the timer list (display of all pre-programmed recordings) - button Jump forwards in the “Current” view by 15 minutes.
32 “PREVIEW” VIEW (PROGRAMME MAGAZINE) The “Preview” view (programme magazine) can be opened at any time in EPG by pressing the " (yellow) button. In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list of selected channels.
33 CA TEGORIES VIEW The “Categories” view can be opened at any time in EPG by pressing the # (blue) button. In the “Categories” view you can see all programmes sorted by category and starting time.
34 SEARCH FUNCTION The search function can be opened at any time in EPG by pressing the button. The search function allows you to search for programmes based on their additional information or their name. Use the number pad to enter the desired search expression (see also “Operating Instructions” “Alphanumeric Input”).
35 ADDITIONAL INFORMA TION (i BUTTON) The additional information can always be opened by pressing the button whenever the “i symbol” appears in front of the program name (see screenshot on the right). First however the channel must be selected.
36 RECORDING (TIMER) The (red dot) button allows you to set up a program at any time for recording on an external recorder . The programme to be recorded can be selected in any of the EPG views, provided the (red dot) button appears at the bottom of the screen display .
37 RECORDING ONCE ONL Y Use the buttons to select the repeat “Once Only” (see screenshot “Recording (T imer)” section). Use the buttons to switch to the selection fi eld “Date” and use the buttons to select the desired recording month.
38 RECORDING WEEKL Y Use the buttons to select the recording mode “Weekly” (see screenshot below). Use the buttons to switch to the selection fi eld “Start” and use the buttons or the number pad buttons to select the desired recording start time.
39 RECORDING MONDA Y TO FRIDA Y Use the buttons to select the recording mode “Monday - Friday” (see screenshot below). Use the buttons to switch to the selection fi eld “Start” and use the buttons or the number pad buttons to select the desired recording start time.
40 TIMER LIST VIEW The “T imer list” view can be opened at any time in EPG by pressing the (red) button. The timer list view shows you all the recordings that are scheduled. The buttons allow the recordings to be sorted into “Once” or “Repeated” recordings.
41 COMMON INTERF ACE Always follow the operating instructions from your pay TV provider and the instructions supplied with the Smartcard and the CA module! Smartcards and CA modules are not included w.
42 MAIN MENU Press the button to open the main menu. The following display appears: Six sub-menus are available. These are explained below: 1) Edit Channel List Sort and delete channels in the cha.
43 EDITING CHANNEL LIST Use the # (blue) button to switch between the TV and radio channels. The change is made in the same way for TV and radio channels. SORTING CHANNELS IN CHANNEL LIST (LEFT COLUMN) Use the buttons to select the channel you want to move, then press the button.
44 Once all the settings have been made, switch to the “OK” line and press the button to apply your settings. The following display appears (example): Filter settings selected EDITING CHANNEL LIST Before you start to assign channels to favourites lists you can fi lter the existing channels using certain criteria.
45 Selection of the favourite list: First select using the (red) button, to which of the four favourite lists you want to copy a channel. Selection of the channel location in the favourite list: A channel newly added to the favourite list is always inserted after the channel currently marked with a black box on the favourite list.
46 SEARCH FOR CHANNELS Use the buttons to select the operation mode for which you want to start a search. The options are DVB-S (sat) and DVB-T (terrestrial). Con fi rm your selection with the button. Y ou can now select whether you want to start an automatic search or a manual search.
47 AUTOMA TIC SEARCH Change to “Satellite” using the buttons. Use the buttons to select whether you want the search to cover all satellites you have setup or only one speci fi c satellite.
48 After completion of the search, you will see the following message: Use the buttons to select whether you wish to add new channels to the old ones or to discard the new channels.
49 MANUAL SEARCH Use the buttons to select which satellites you want to cover with a search. Use the buttons to switch to “T ransponder” and select the transponder to be covered by the search using the buttons.
50 SECURITY Press the button to open the main menu. Select the “Security” menu using the buttons and press the button. Enter the receiver PIN (factory setting “0000”) and con fi rm it by pressing the button.
51 BOX SETTINGS Press the buttons to select the desired menu. Open the menu using the button. 1) Video Settings De fi nition of the video settings 2 ) Menu Settings De fi nition of variou.
52 BOX SETTINGS VIDEO SETTINGS Use the buttons to select the line you want to change. Use the buttons to make the changes. Screen Format: Select your TV's format here.
53 TV Output Format: Select the type of video signal that is to be at the Scart socket here. Select the signal that your TV set can process. Refer to the operating instructions for your television set.
54 BOX SETTINGS MISCELLANEOUS SETTINGS Use the buttons to select the line you want to change. Use the buttons to make the changes. T ime Zone Adjustment: Here you can set whether the time zone is set automatically or manually . T ime Zone (GMT): Here you can set the time zone manually .
55 Press the button to open the main menu. Select the “Conditional Access” menu using the buttons and press the button. The following display appears: Access to the Smartcard in the.
56 MODIFY MA TURITY RA TING Use the buttons to select the “Smart card management” menu, and press the button to open it. If required, enter the Smartcard PIN code. Use the buttons to select the “Modify maturity rating” menu, and press the button to open it.
57 This menu informs you which CA module is fi tted to your receiver and which Smartcard is present in the CI slot. Select the “CryptoWorks - CI” menu using the buttons and press the button to open it. Y ou will then see the menu generated by the CA module.
58 BOX SETTINGS See “First Installation” section page 13ff. LNB SETTINGS.
59 SER VICE MENU Press the buttons to select the desired menu. Open the menu using the button. 1) Sat Finder Check the satellite signal strength and reception quality , which can also be used for the coarse alignment of a satellite reception system 2 ) Channel Information Display information on the channel currently selected, e.
60 SER VICE MENU SA T FINDER If you do not have a meter for adjusting your re fl ector , you can use the sat fi nder as an alignment aid. Y ou can select the different lines using the buttons. Make changes in the lines using the buttons (e.
61 SYSTEM INFORMA TION SER VICE MENU In the “System Information” menu, the receiver displays information regarding its hardware and software versions. UPDA TING SOFTW ARE As soon as the receiver is switched into stand-by mode, it automatically checks whether new software/a new servicelist is available for downloading.
62 SER VICE MENU UPDA TE SOFTW ARE NOW The following displays appear: If as well as the new software a new servicelist for the receiver is also offered, you have the following selection options (use t.
63 During the update, do not under any circumstances unplug the receiver from the mains. This may corrupt the entire software and necessitate return of the receiver for repair! Now use the buttons to select whether you wish to update the software (“Y es”) or abort the procedure (“No”).
64 In the following information window , use the buttons to select “Y es” and start the update by pressing the button. The receiver will now automatically searches for new software.
65 RESTORING F ACTOR Y SETTINGS Here you can reset all the settings to the pre-programmed factory settings. All your personal preferences (favourites lists, channel sorting, etc.) will be deleted! Select “Y es” using the buttons and con fi rm the reset by pressing the button.
66 LANGUAGE Use the buttons to select the line you want to change. Use the buttons to make the changes. Menu Language: Select the required menu language. Available options: German, English, French, Italian, Spanish, Czech, Dutch and Turkish.
67 TECHNICAL APPENDIX TECHNICAL FEA TURES ¹ ) CA module not included with this product ² ) Only displayed if this information is broadcast by the channel provider Reception of digital TV and Rad.
68 TECHNICAL APPENDIX T ype UFS 733si UFS 733sw Order no./colour 20210131/silver 20210132/black RF properties sat Input frequency range MHz 950-2150 Input level range dBµV 44-83 Reception threshold (EB/NO) dB < 4.
69 TECHNICAL APPENDIX Signal Pin no. TV VCR/AUX Audio right output 1 X X Audio right input 2 X Audio left output 3 X X Audio earth 4 X X Blue earth 5 X X Audio left input 6 X Blue signal 7 X X Switchi.
70 TECHNICAL APPENDIX CONNECTION EXAMPLE Dolby digital system Hi- fi system.
71 TECHNICAL APPENDIX EXAMPLES single-cable systems EXR 501/551/552 Single-cable switching matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KA.
72 UAS 481 Single-cable feed system TECHNICAL APPENDIX * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12.
73 EXU 908 Single cable matrix TECHNICAL APPENDIX * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF.
74 TECHNICAL APPENDIX EXR 1581/2581 Single-cable matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF.
75 FOR YOUR NOTES.
Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 100 444 • 83004 Rosenheim GERMANY 936.3376/B/0209/ZWT - T echnical data subject to change.
An important point after buying a device Kathrein UFS 733sw (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kathrein UFS 733sw yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kathrein UFS 733sw - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kathrein UFS 733sw you will learn all the available features of the product, as well as information on its operation. The information that you get Kathrein UFS 733sw will certainly help you make a decision on the purchase.
If you already are a holder of Kathrein UFS 733sw, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kathrein UFS 733sw.
However, one of the most important roles played by the user manual is to help in solving problems with Kathrein UFS 733sw. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kathrein UFS 733sw along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
