Instruction/ maintenance manual of the product UFE 371/S Kathrein
Go to page of 36
Operating Instructions DVB-T Receiver UFE 371/S.
2.
Preface 3 Preface Dear Customer, These operating Instructions will hel p you make optimum use of the many functions of your new DVB-T receiver. We have made the operating instructions as easy as possible to understand, and as short as possible. For environmental protection, we have equipped a power switch.
Content 4 Content Preface ........................................................................................................................ ...................................... 3 Content .......................................................
Views and Connections 5 3 Views and Connections Front View 1) Operation/Stand-by key 2) Programme-selection keys 3) Programme display Rear View 1) TV antenna input socket 2) TV antenna input (looped-t.
Remote Control 6 Remote Control 1 2 3 4 6 7 8 9 10 11 12 5 13 6 5 14 15 16 17 18 19 20.
Remote Control 7 Functions of the Remote Control 1) POWER: switching on and stand-by mode 2) Numeric keypad (0-9): For entering programme numbers or menu parameters 3) QUALITY/P-: Displays the DVB-T signal level of the current programme.
Remote Control 8 Using the Remote Control You can use the OK key to confirm the individual settings in the menus or to call up sub-menus. Change each setting line by line, and confirm the entry by pressing the OK key. Press EXIT key to leave the menu, or change from a sub-menu to ist respective main menu.
Safety Notices 9 Safety Notices.
Operation 10 Operation First Installation When you have connected your receiv er properly, switch it on using the power switch on the rear of the unit. You will see the following: Now select the language in which you would like to see the menu by using the / keys.
Operation 11 Programme Selection (TV and Radio) The receiver is preassigned for the most common programmes. Your terrestrial antenna must accurately aligned to achieve proper reception. Press the OK key to call up the list of existing programmes. Select the programme using the / keys, and press the OK key.
Operation 12 Programme Information When you change to another channel, the following information is displayed at the bottom of the screen: - The type of programme: TV or Radio (indicated by an icon) -.
Operation 13 Electronic Programme Guide (EPG) The EPG (Electronic Programme Guide) key can be used to call up the programme information, if br oadcast by the programme provider. You can switch to the desired programme by pressing either or . For automatical programming, press the blue key.
Operation 14 You can also obtain detailed inform ation directly from the current programme, using the red key. You will then see a display of the desired data about the current TV progr amme without having to switch to EPG mode first (see illustration).
Operation 15 Pause and Zoom You can use these keys to make the picture smaller, or to switch to freeze image. The Quality Key (Auxiliary function for antenna adjustment) In addition to the display showing st rength and quality of reception, the receiver has also an auxiliary func tion with an acoustic signal for the antenna alignment.
Main Menu 16 Main Menu Calling up the Main Menu (MENU key) Press the MENU key to call up the main menu, select the desired sub- menu, and press the OK key.
Main Menu 17 Organising Programmes and Favourites Sorting: Press the red key to call up the sort functions. When you exit the menu, the receiver prompts y ou for password confirmation. Attention! When sorting has been confirmed, acce ss to the previous lists is no longer possible.
Main Menu 18 Setting the Timer (Automatic Programming) Note: The timer can also be programmed with the Electronic Program me Guide (EPG). See Page 14. The clock must be set correctly in order that the timer is ready for operation (see Installation Menu).
Installation Menu 19 Installation Menu Adjusting the receiver to y our receiving installation: 1) Antenna alignment Select 5 V power supply (On/Off) for the antenna 2) Scan Auto Scan (overall search), Net Scan (network search), TP Scan (specific channels) and PID Scan (search for one specific programme, using the PID).
Installation Menu 20 Antenna Type Note: Should you use a DVB-T indoor antenna (e.g. Kathrein BZD 30, visible in the background), it must receive a power supply of 5 V. If the antenna has its own power supply, the default setting of 5 V AUS (inactive) must be retained.
Installation Menu 21 In this menu, you can carry out the programme search. 1) AutoScan All channels in the range of 177 MHz to 858 MHz are searched for programmes. 2) Net Scan The entire network is searched for network information. (Results only if this inform ation is transmitted with the programmes).
Installation Menu 22 System Configuration This menu allows the adaptation of y our receiver to your audio-visual surroundings, or the reset to the factory settings: Setting Languages Access to language selection. The following menu languages are available: German, Spanish, Italian, Czech and English.
Installation Menu 23 Setting TV Selection of video output standard (PAL, NTSC, SECAM, AUTO), screen format type (4/3 or 16/9) and the output signal which can be obtained at the TV output: CVBS: compos.
Installation Menu 24 Clock Parameters Date and time must be programmed in order that the receiver indicates the correct information messages when you use the timers, and in the information messages mode (and on the front in stand-by mode). The internal clock can be set as follows: a) The transmitted time of day can be used (default setting).
Installation Menu 25 System Information Display of the hardware and software versions of the receiver. Factory Settings This menu is protected with t he password “0000”. If you have changed the programming of the receiver and want to return it to the condition in which it was delivered, select this item.
Installation Menu 26 Parental Lock In this menu, you can lock all m enus to prevent inadvertent wrong setting. The receiver is delivered with the installation menu locked, but the other menus are not protected. For child protection, it is necessary to lock all the menus.
Installation Menu 27 Software Update Attention: A PC and a null-modem cable are required for the update process! If new software for your DVB-T rece iver should become available, you can download it from the following homepage: www.
Games 28 Games Use the / keys in the main menu to select “Games” and press then OK . The following is then displayed: Choose one of the two games listed.
Games 29 Tetris Snake.
Functions and Technical Data 30 Functions and Technical Data • Reception of free, digital terrestrial TV and radio programmes • 1000 Programme memory positions • Electronic Programme Guide (EPG).
Functions and Technical Data 31 Designation UFD 371/S Order Number 20210062 RF Characteristics Input frequency range MHz 177.5-226.5 and 474-858 Channel bandwidth MHz 7/8 switchable Modulation type CO.
Connection Scheme 32 Connection Scheme Note: Of course, you may also connect a DVD recorder instead of a VCR (video recorder).
DVB-T-Indoor-Antenne BZD 30 33 DVB-T-Indoor-Antenne BZD 30 The reception range of the antenna is 174-230 MHz in the VHF waveband, and 470-862 MHz in the UHF waveband. The BZD 30 has almost omnidirectional characteristics, so exact orientation is not necessary.
Notice 34 Notice.
Notice 35.
Int ern et: ht tp: //www. ka thr ein .de KATHREIN-Werke KG . Phone +49 8031 184-0 . Fax +49 8031 184-306 Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 .
An important point after buying a device Kathrein UFE 371/S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kathrein UFE 371/S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kathrein UFE 371/S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kathrein UFE 371/S you will learn all the available features of the product, as well as information on its operation. The information that you get Kathrein UFE 371/S will certainly help you make a decision on the purchase.
If you already are a holder of Kathrein UFE 371/S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kathrein UFE 371/S.
However, one of the most important roles played by the user manual is to help in solving problems with Kathrein UFE 371/S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kathrein UFE 371/S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
