Instruction/ maintenance manual of the product UFE 305/S Kathrein
Go to page of 36
User manual UFE 305/S DVB-S receiver Order Number: 20210049.
2.
Preface 3 Preface Dear customer, This user manual will help you make the best use of the many functions your new sate llite receiver offers. We have composed the instructions as plain and short as possible. To spend only a minimum of electricit y in case you are absent for any length of time, please turn off the receiver with the power switch.
Contents 4 Contents Preface ........................................................................................................................ ...................................... 3 Contents ....................................................
Control elements and connections 5 Control elements and connections View front panel 1) Standby on/off 2) Selecting programmes one after the other 3) Programme display View back panel 1) SAT-IF input .
Remote control 6 Remote control 1 2 3 4 6 7 8 9 10 11 12 5 13 6 5 14 15 16 17 18 19 20.
Remote control 7 Keys on the remote control 1) POWER: To turn on/off (off = standby mode) the receiver 2) Number keys (0-9): To enter the programme positions or menu parameters 3) QUALITY/P-: To have information on the current programme, satellite and/or programme position etc.
Remote control 8 How to use the remote control Press OK to confirm the settings in the individual menu items or to call up their submenus. Change the settings line by line each, and confirm your entries by pressing OK . Press EXIT to exit the menu, or to swap from a submenu to another menu item.
Safety instructions 9 Safety instructions.
Operation 10 Operation Programme selection The receiver is factory pre-programmed with most of the common satellites. In order to be able to re ceive properly, of course, you should have aligned the antenna onto at l east one of these satellites. Press SEL in order to call up the list of the pre-programmed satellites.
Operation 11 Programme information The following information is displayed when you change the programme: - Whether it is a TV or a radio programme - Name and position of the programme - Whether EPG da.
Operation 12 Electronic programme guide (EPG) Press EPG to call up information on a programme/, provided that this information is broadcast by the programme provider. Press / to swap between the displayed broadcasts. To get to the following/previous day, press either Recall/P+ or Quality/P- .
Operation 13 You can alternatively obtain the details on the current broadcast/programme if you press the red key while watching this broadcast/programme. Then, the information on the current broadcast/programme is directly displayed on the screen. This means, you do not necessarily have to switch to EPG mode (see fig.
Operation 14 Audio Press Audio to have the sound (TV or radio) which is transmitted over the receiving channel indicated. Select the sound and confirm your selection with OK . If the station does not transmit any information on the language(s) in which the broadcast is transmitted, the receiver displays 'unknown'.
Main menu 15 Main menu Calling up the main menu (MENU key) Press MENU to call up the main menu, select the desired submenu, and press OK . There are five different submenus, which are explained in the.
Main menu 16 Timer setting (automatical programming) Note: The timer may either be programm ed via the electronic programme guide ' EPG' (see page 13), or as described in the following. The clock must be correctly set so that the timer is functional (see 'Installation menu/adjust system/set time').
Main menu 17 Organising the programmes and favourites Sorting: 1. Press 'Menu' to call up the receiver menu. 2. Select menu item 'Programme list editing' and confirm this item with 'OK'. 3. Now scroll to the programme you want to shift using the cursor keys (the programme is then highlighted in yellow).
Installation menu 18 Favourite: 1. Press 'Menu' to call up the receiver menu. 2. Select menu item ' Programme list editing' and confirm this item with 'OK'. 3. Now press the blue key to access the menu 'Favourite'.
Installation menu 19 Installation menu Adjusting the receiver to your satellite reception installation: 1) LNB configuration Enter information on the antenna (satellite, LO frequency, LNB voltage, ava.
Installation menu 20 Adjusting the LNB In this menu, you can configure your receiver for your antenna: - Select LNB type (standard-progr amming for universal LNBs) - LNB supply voltage - DiSEqC™ switch V1.
Installation menu 21 Search (adjusting a channel) Programme search: Note: The receiver indicates not only the reception strength and quality, but also provides an auxiliary function (sound signal) to align the antenna. In menu item 'search', you can activate this auxiliary function with the mute key.
Installation menu 22 In this menu, you can carry out the search 1) Satellite search Press OK to have the satellite list displayed, then select a satellite. You may also enter a new satellite. The required steps are all indicated in line 'Help'.
Installation menu 23 Searching for a new programme via a transponder search 1. Press 'Menu' on your remote control. 2. Select menu item 'Installation', confirm with 'OK'. 3. Then select menu item 'Search', confirm with 'OK'.
Installation menu 24 4) Netw ork search If you choose 'Yes', the receiver automatically receives the transponder frequency tables (if av ailable) and adds them to the transponder list for the search. Note: For some of the satellites, these indications are not concordant w ith the actual data.
Installation menu 25 System setup Setting the language Access to the language menu: German, French, Italian, Spanish and English. Also, the favourite l anguages for audio and subtitles can be chosen here.
Installation menu 26 OSD setting (menu display) Selection of the individual display parameters: Setting the time (clock parameters) The time and date must be programmed, so that the receiver shows the correct data in the informat ion messages or when you use the timer for recordings, and in standby mode on the display on the front panel.
Installation menu 27 Note: Some programmes m ay not transmit the correct GMT. In this case, the receiver displays the wrong time of day. To have the correct time of day displayed again, change to another European programme, and wait a few minutes until the receiv er shows the correct time again.
Installation menu 28 Child lock In this menu, you can block the menus to prevent any inadvertent wrong settings. To activate the child lock, you must block each menu. Attention: Always make a note if you change the password. If you forget the password, this will result in repair work at the factory which is not covered by the guarantee.
Installation menu 29 Software update Attention: You need a PC and a null modem cable to carry out updates! If new software for your DVB-S rece iver should be available, you can download it from the following homepage: http://www.kathrein.de/de/sat/news/update.
Games 30 Games Use the / keys to select 'Game' in the main menu, and press OK . The following is displayed: Now you can choose one of the two games listed.
Functions and technical data 31 Functions and technical data • Reception of FTA digital satellite TV and radio programmes • 4,000 programme memory positions (1,000 of them pre-programmed) • Soft.
Functions and technical data 32 Technical data Type UFE 305/S Order Number 20210049 Colour Silver RF range Sat-IF frequency range MHz 950-2,150 Input level range/impedance dbµV 44-83 Reception threshold (EB/NO) dB ≤ 4.
Connection diagram 33 Connection diagram.
Your notes 34 Your notes.
Your notes 35.
inte rnet : http ://www. kat hrei n.de KATHREIN-Werke KG x phone +49(0) 8031 1840 x fax +49(0) 8031 184306 Anton-Kathrein-Straße 1-3 x P.O. box 10 04 44 x 83004 Rosenheim GERMANY 936.
An important point after buying a device Kathrein UFE 305/S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kathrein UFE 305/S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kathrein UFE 305/S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kathrein UFE 305/S you will learn all the available features of the product, as well as information on its operation. The information that you get Kathrein UFE 305/S will certainly help you make a decision on the purchase.
If you already are a holder of Kathrein UFE 305/S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kathrein UFE 305/S.
However, one of the most important roles played by the user manual is to help in solving problems with Kathrein UFE 305/S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kathrein UFE 305/S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
