Instruction/ maintenance manual of the product MSK 200/S2 Kathrein
Go to page of 24
User Manual Antenna signal meter system MSK 200/S2.
2 PREF ACE/IMPORT ANT NOTES Dear customer , We kindly ask you to observe all instructions contained in this manual. The Kathrein-Werke KG has made every effort to ensure that the data and descriptions in this manual are accurate and complete. We reserve the right to make changes to this manual without prior notice.
3 CONTENT PREF ACE/IMPORT ANT NOTES ................................................................................................. 2 GENERAL SAFETY INFORMA TION .......................................................................................
4 SAFETY This device was built and tested in accordance with the enclosed EU certi fi cate of conformity and left the factory in a condition full fi lling all requisite safety regulations. T o ensure that this condition is maintained and to ensure hazard-free operation, the user must observe all in- structions, warnings and warning notes.
5 SAFETY 5. Prior to switching on the device, ensure that the nominal mains voltage set on the device and the nominal mains voltage of the supply match. If it is necessary to change the voltage setting, it may also be necessary to change the respective mains fuse for the device.
6 FEA TURES/DELIVER Y SCOPE The MSK 200 is a compact state-of-the-art signal meter which leaves nothing to be desired when you are checking antenna and cable systems or even professional head-end systems.
7 OPERA TION INITIAL ST ART -UP Prior to operating for the fi rst time, please take the T 8.0 A fuse out of the packaging and fi t it into the provided fuse holder .
8 USING THE DEVICE ON THE SHOULDER STRAP When the device is used on the strap, also provide for adequate ventilation! T o avoid a build up of heat, the openings for the fan and the ventilation holes must always be clear .
9 GENERAL OPERA TION KEYBOARD OPERA TION SETTINGS: SA VE, SETUP , COPY , PRINT Switching the device ON/OFF , or to standby mode. If the button is kept pressed more than 5 seconds, the device is switched off.
10 GENERAL OPERA TION TOUCHSCREEN OPERA TION T ap on the touchscreen keys to select the respective task! SOURCES Selection (SOURCE) Measurement Selection (ANAL YZE) When the “SOURCE“ button is pre.
11 GENERAL OPERA TION This type of key leads to a selection of various set- tings (e.g. selection of the channel)! This type of key offers the facility for alphanumerical input (e.g.: entering programme names)! This type of key offers the facility for numerical input (e.
12 GENERAL OPERA TION T o open the zoom window , press and hold your fi n- ger on the marker; you can then shift it to the desired position! Press the “FUNCTION“ key , tap on the screen and hold to drag the screen section as required (e.
13 OPERA TION CHOICE OF THE SIGNAL SOURCE AND MEASUREMENT The most important keys on the MSK 200 are and . After activating the key , you will be able to de fi ne the source and the channel or transponder to be measured. After pressing the key , you will be able to choose the type of measurement wanted and have this carried out.
14 OPERA TION CHOOSING THE CHANNEL T O BE MEASURED Now one can choose the channel to be measured: Generally there are different possibilities of fered as to how a measurement channel can be chosen 1. Selection of programme through programme name 1.1. Press “Chan.
15 OPERA TION Information on the individual measurement possibilities can also be found in the on-board help menus. Generally an optimal pre-setting of parameters is saved in the MSK 200 for each type of measurement. There are though many other set-up possibilities that can be carried out dependant on the measurement in question.
16 FUNCTION OVER VIEW Mains external AC power supply unit 100...240 V Battery internal Li-Ion battery 12 V/6,5 AH external battery supply vehicle 1 1 V ...16 VDC keyboard 12 hardkeys On/Off, Help, Prog.+, Prog.-, Analyze, Source, OSD/Off, V ol.+, V ol.
17 FUNCTION OVER VIEW TV (CA TV/terrestrial) 5...900 MHz Satellite 900....3100 MHz FM 87,5...108 MHz Spectrum analysis 5...3100 MHz Digital CA TV J83 A/C (DVB-C) 16, 32, 64, 128 ,256 QAM J83 B 64 QAM .
18 TECHNICAL APPENDIX DESIGN • Manageable portable signal meter • High-resolution 10.4“ TFT colour display to graph analogue and digital TV signals and graphics • Backlight - thus the display is excellently readable also in bright sunlight (typ.
19 T ype MSK 200/S2 MSK 200/S2 Order no. 21710024 21710025 Spectrum analyser Frequency range MHz 5-3100 Resolution bandwidth (-3 dB) MHz 0.001-10 Resolution bandwidth (-6 dB) kHz 9, 25, 50, 120, 200 Video bandwidths MHz 0.00001-3 Phase noise at 10 kHz carrier level spacing dBc <-90 (1 Hz), typ.
20 TECHNICAL APPENDIX Digital CA TV receiver (J83 A, B, C) Modulation type 16 QAM, 32 QAM, 64 QAM, 128 QAM, 256 QAM Symbol frequency MSymb/s 2.0-6.999 Frequency increment kHz 50 Video output voltage/impedance V ss / Ω 1/75 ± 1 dB IF bandwidths MHz 1, 5, 6, 7, 8, 12 MER measurement dB > 33/typ.
21 TECHNICAL APPENDIX Connections RF input standarad (impedance) Ω 1.6/5.6 (75) N-type socket (50) Composite colour picture input/output, RGB output Scart socket Video input/output 2 x BNC socket T r.
22 SER VICE DEVICE CALIBRA TION Device maintenance is essentially limited to cleaning the exterior . The calibration interval is dependent on operational demands made on it and should be carried out every 1 to 2 years. The calibration can be carried out by ESC Kathrein customer service, see below .
23 SER VICE If, despite studying this operating manual, you still have questions about getting started with the unit or using it correctly , or if unexpected problems occur , please contact your specialist dealer . MAIN SERVICES www .esc-Kathrein.de Fa.
Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 10 04 44 • 83004 Rosenheim/GERMANY 936.3448/A/0209/ZWT - T echnical data subject to change!.
An important point after buying a device Kathrein MSK 200/S2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kathrein MSK 200/S2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kathrein MSK 200/S2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kathrein MSK 200/S2 you will learn all the available features of the product, as well as information on its operation. The information that you get Kathrein MSK 200/S2 will certainly help you make a decision on the purchase.
If you already are a holder of Kathrein MSK 200/S2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kathrein MSK 200/S2.
However, one of the most important roles played by the user manual is to help in solving problems with Kathrein MSK 200/S2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kathrein MSK 200/S2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
