Instruction/ maintenance manual of the product TM-H1950CG JVC
Go to page of 16
TM-H1950CG OPERATING INSTRUCTIONS [TM-H1950CG /E /TM-H1950CG /U ] BEDIENUNGSANLEITUNG : F ARB-VIDEO-MONIT OR MANUEL D’INSTRUCTIONS : MONITEUR VIDÉO COULEUR MANU ALE DI ISTR UZIONI : MONIT OR VIDEO .
TM-H1950CG 1-2 No.51961.
TM-H1950CG 1-3 No.51961 ENGLISH CONTENTS SAFETY PRECAUTIONS ................................................................................. 2 CONTROLS AND FEA TURES ......................................................................... 4 CONTROLS AND FEA TURES (INPUT CARD: OPTIONAL) .
TM-H1950CG 1-4 No.51961 T ally lamp Lights when the tally control signal is ON. The tally control signal is input through the REMOTE (external control) remote terminal. For details, refer to Page 18. Chroma/Phase button [ CHROMA/ PHASE] Press this button to activate the picture color density adjustment mode or picture hue adjustment mode.
TM-H1950CG 1-5 No.51961 ENGLISH Input card slot (SLOT) Optional input cards can be installed in this slot. Input cards are not provided when you purchase this monitor . REMOTE (external control) terminal Connect this terminal to an external control unit to enable remote operation of the monitor .
TM-H1950CG 1-6 No.51961 ENGLISH Video input/output terminals Input (IN) and output (OUT) terminals for component (color deference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.
TM-H1950CG 1-7 No.51961 1. Turn of f the Color V ideo Monitor’s main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card.
TM-H1950CG 1-8 No.51961 ENGLISH VIDEO SIGNAL CONTROLS Use these buttons for video signal control. UNDER SCAN Press the UNDER SCAN button to reduce the size of display area so that the whole picture is displayed on screen. Use to check the picture frame.
TM-H1950CG 1-9 No.51961 ENGLISH EXIT CHROMA MENU PHASE BRIGHT CONTRAST VOLUME/SELECT DISPLA Y AND SELECTIONS IN THE <SET -UP MENU> MODE (SETTING) • PICTURE SUB ADJ. • WHITE BALANCE • REMOTE SYSTEM • H. POSITION • CONTROL LOCK • INPUT REMOTE • V .
TM-H1950CG 1-10 No.51961 ENGLISH Functions (Items) Initialization (setting) APERTURE 00 ADJ. BAR POSI LOWER COLOR TEMP 6500 COLOR SYSTEM AUTO COMPO. LEVEL 00 RUSH DELA Y STD. PICTURE SUB ADJ. CONTRAST 00 BRIGHT 00 CHROMA 00 PHASE 00 H. POSITION 00 V .
TM-H1950CG 1-11 No.51961 16 VIDEO A AUDIO A AUDIO B VIDEO B IN OUT IN IN IN OUT OUT IN OUT Y/C OUT BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of dif ferent connections.
TM-H1950CG 1-12 No.51961 20 SPECIFICA TIONS MODEL TM-H1950CG TM-H1750CG T ype Color video monitor Color system P AL, NTSC (3.58) Picture tube 49 cm (19") measured diagonally , 44 cm (17") measured diagonally , 90° deflection, in-line gun, 90° deflection, in-line gun, trio-dot type trio-dot type (phosphor dot-trio pitch 0.
TM-H1950CG 1-13 No.51961 ENGLISH POWER CHROMA MENU ASPECT INPUT SELECT UNDER SCAN COLOR OFF BLUE CHECK PHASE TM-H1950CG BRIGHT CONTRAST VOLUME/SELECT AB SLOT CD 440 (17-3/8") 496 (19-5/8") 485 (19-1/9") 375 (14-7/8") * 380.4 (15") 284.
TM-H1950CG 1-14 No.51961 ENGLISH Problems No power supply . No picture with the power on. No sound. Shaking picture. No colors, wrong color , or dark picture. Unnatural, irregularly colored, or distorted picture. Dark stripes appear at the top and bottom of the screen, picture vertically squeezed.
TM-H1950CG 1-15 No.51961 21 ● T o use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked digital signals.) ● Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2).
VP0206 DP3051 VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand 0402-Y-U-JMT © 2002 VICTOR COMP ANY OF JAP AN, LIMITED TM-H1950CG/TM-H1750CG COLOR VIDEO MONITOR.
An important point after buying a device JVC TM-H1950CG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TM-H1950CG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TM-H1950CG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TM-H1950CG you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TM-H1950CG will certainly help you make a decision on the purchase.
If you already are a holder of JVC TM-H1950CG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TM-H1950CG.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TM-H1950CG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TM-H1950CG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
