Instruction/ maintenance manual of the product SP-UXH33 JVC
Go to page of 32
For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference .
G-1 W arnings, Cautions and Others IMPORT ANT for the U .K. DO NO T cut off the mains plug from this equipment. If the plug fitted is not suitable f or the power points in y our home or the cable is too short to reach a power point, then obtain an appropriate safety appro ved extension lead or consult your dealer .
G-2 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manuf actured to meet international safety standards, b ut like any electrical equip- ment, care must be taken if y ou are to obtain the best results and saf ety is to be assured.
1 Introduction About This Manual This manual is organized as follo ws: • The manual mainly explains operations using the buttons on the r emote control. Y ou can use the b uttons both on the remote control and on the main unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise.
2 Contents Location of the Buttons ............................................... 3 Main Unit .......................................................................... 3 Remote Control ................................................................
3 MICRO COMPONENT SYSTEM STANDBY w q e r t T op view Front view TIMER/SNOOZE MUL TI CONTROL ONE TOUCH REC AHB PRO VOLUME AUX T APE CD TUNER BAND COMPACT DIGITAL AUDIO PHONES 4 ¢ 7 OPEN 9 7 p 1 2 5 6 8 4 3 Become familiar with the buttons on y our unit.
4 Main unit 1 PHONES jack (11) 2 Disc cov er 3 TIMER/SNOOZE button (10, 22 – 24) 4 ONE T OUCH REC (recording) button (20, 21) 5 (standby/on) button (11, 23) 6 Source buttons • A UX, @ # T APE, BAND TUNER, and # / 8 CD Pr essing one of these buttons also turns on the unit.
5 Remote Control See the pages in parentheses for details. 1 Number buttons 2 BASS b utton (11) 3 Multi control buttons • UP , 4 (re verse skip), 7 (stop), ¢ (forward skip), and DO WN 4 SET button (13) 5 Source buttons • 3 / 8 CD, 2 3 T APE, TUNER, and A UX Pr essing one of these buttons also turns on the unit.
6 Getting Started Supplied Accessories Make sure that you hav e all the following items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • FM antenna (1) • A C power cord (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
7 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 2 T ur n the AM loop antenna until y ou hav e the best reception. T o connect an outdoor AM (MW) antenna When reception is poor , connect a single vinyl-co vered wire to the AM EXT terminal and extend it horizontally .
8 Speaker grille T o remov e the speaker grille, insert your fingers at the top of the speaker grille, pull to wards you. Then pull the bottom tow ards you. T o attach the speaker grille, follo w the illustration abo ve . Connecting Other Equipment T o connect an audio equipment Y ou can connect audio equipment — used only as a playback device.
9 Putting the Batteries into the Remote Control Insert the batteries — R6(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and – ) on the batteries with the + and – markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
10 Common Operations Setting the Clock Before operating the unit any further , f irst set the unit ’ s clock. When y ou plug in the power cord, the CLOCK indicator and “ 0:00 ” start flashing on the display . Y ou can set the clock whether the unit is on or of f.
11 Adjusting the T one (Bass/T reble) Y ou can adjust the bass le vel (lo w frequency range) and the treble lev el (high frequency range) within a range of – 5 to +5. When shipped, the bass le vel set to “ B ASS 0 ” and the treble lev el set to “ TREBLE +1.
12 T uning in to a Station 1 Press TUNER (or B AND TUNER on the unit) to select the band. The unit automatically turns on and tunes in to the previously recei ved station — either FM or AM (MW). • Each time you press the button, the band alternates between FM and AM (MW).
13 T o preset stations manually — Manual presetting Y ou need to preset stations separately for the FM and AM (MW) bands. • There is a time limit in doing the follo wing steps. If the setting is canceled before you finish, start o ver from step 2 .
14 DISPLA Y PS (Program Service) PTY (Program Type) RT (Radio Text) Station frequency (or preset channel no.) Changing the RDS Information Y ou can see RDS information on the display while listening to an FM station. On the remote control ONL Y : Press DISPLA Y (orange-colored).
15 Switching T emporarily to a Program T ype of Y our Choice The Enhanced Other Networks function allo ws the unit to switch temporarily to a broadcast program of your choice (T A, NEWS, and INFO) from a different station. • The function only works when you are listening to a preset FM RDS stations providing the data.
16 Playing Back Discs This unit has been designed to play back the following discs — CD, CD-R, and CD-R W . When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recordable) and CD-R Ws (CD-ReWritable) can be played only if they are already “ finalized.
17 Basic Disc Operations While playing a disc, you can do the following operations. T o stop playing for a moment During play , press 3 / 8 CD. While pausing, the elapsed playing time flashes on the display . T o resume playing, press 3 / 8 CD again. T o go to another track Before or during play , press ¢ or 4 repeatedly .
18 T o skip the current track, press ¢ . • Y ou cannot go back to the pre vious track by pressing 4 . T o stop playing, press 7 . T o exit from Random Play , press RANDOM before or after playing. Random Play is canceled and Normal Play resumes. • The RANDOM indicator goes off.
19 Playing Back T apes Y ou can play back type I tapes. Playing Back a T ape 1 Press ) f or cassette deck on the unit. The cassette holder opens. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder cover gently . 4 Press 2 3 T APE.
20 Recording 2 Close the cassette holder gently and check the recording dir ection f or the tape. • If the tape direction is not correct, press 2 3 T APE twice then 7 to change the tape direction. • If you want to record on both sides of a tape, see “ T o record on both sides — Reverse Mode.
21 Disc Direct Recording Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you hav e set in Program Play . On the unit ONL Y : 1 Put a recordable cassette in with the exposed part of the tape down. 2 Load a disc.
22 Using the T imers There are four timers av ailable — Daily T imer, Recording T imer , Snooze T imer , and Sleep T imer . Before using the timers, you need to set the unit ’ s clock (see page 10). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or off.
23 4 Select the timer (Daily Timer or Recording T imer) with the source to play . On the remote control: Press UP or DOWN to select the timer , then press CLOCK/TIMER.
24 Using Sleep Timer W ith the Sleep T imer , you can fall asleep to music. Y ou can set the Sleep T imer when the unit is turned on. How the Sleep Timer actually works The unit automatically turns of f after the specified time length passes. On the remote contr ol ONL Y : 1 Press SLEEP .
25 Maintenance T o get the best performance from the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
26 T r oubleshooting If you are having a problem with your unit, check this list for a possible solution before calling f or service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damaged, call a qualif ied person, such as your dealer , for service.
27 Additional Information NEWS : News. AFF AIRS : T opical pro gram expanding or enlar ging upon the news — debate, or anal ysis. INFO : Program the purpose of which is to impart advice in the widest sense. SPORT : Program concerned with any aspect of sports.
28 Specifications Amplifier Output Power: 20 W (10 W + 10 W) at 4 Ω (10% THD) Audio input sensitivity/Impedance (at 1 kHz) A UX: 500 mV/48.75 k Ω Speakers/Impedance: 4 Ω T uner FM tuning range: 87.
VICT OR COMP ANY OF JAP AN, LIMITED EN 0103MWMMDWJEM © 2003 VICT OR COMP ANY OF JAP AN, LIMITED COVER_UX-H30[B]f.pm6 02.12.23, 10:04 PM 2.
An important point after buying a device JVC SP-UXH33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC SP-UXH33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC SP-UXH33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC SP-UXH33 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC SP-UXH33 will certainly help you make a decision on the purchase.
If you already are a holder of JVC SP-UXH33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC SP-UXH33.
However, one of the most important roles played by the user manual is to help in solving problems with JVC SP-UXH33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC SP-UXH33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
