Instruction/ maintenance manual of the product KS-FX480J JVC
Go to page of 30
ENGLISH GET0068-001A [J] ESP AÑOL FRANÇAIS CASSETTE RECEIVER KS-FX480 INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTR UCTIONS RECEPT OR-REPRODUCT OR DE CASSETTE KS-FX480 RADIOCASSETTE KS-FX480 200W KS-FX480 Multi Music Scan TAPE SOUND VOL VOL SOURCE R F U D ATT For customer Use: Enter below the Model No.
2 ENGLISH BEFORE USE * For safety .... • Do not raise the volume le vel too much, as this will block outside sounds, making driving danger ous. • Stop the car befor e performing any complicated operations.
3 ENGLISH LOCA TION OF THE BUTTONS Control panel q 24 37 u t y e 8 1 9 p w 56 i o ; a r s g d / f kl j h TAPE z 200W Multi Music Scan KS-FX480 o DISP (displa y) button • Also functions as SSM buttons when pr essed tog ether with MODE button.
ENGLISH 4 Preparing the remote controller 2. Place the battery . Slide the batter y into the holder with the + side facing upw ards so that the battery is fixed in the holder . Lithium coin battery (product number: CR2025) 3. Return the battery holder .
ENGLISH 5 3 • Selects the preset stations while listening to the radio . Each time you press the b utton, the preset station number increases, and the selected station is tuned in. • Skips to the pre vious disc while listening to the CD changer . Each time you press the b utton, the disc number decreases, and the selected disc starts playing.
6 ENGLISH BASIC OPERA TIONS 3 Adjust the volume. 4 Adjust the sound as you want. (See pages 13 – 15.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume le vel will drop in a moment.
7 ENGLISH Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). Note: This r eceiver has three FM bands (FM1, FM2, FM3).
8 ENGLISH Storing stations in memor y Y ou can use one of the follo wing two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Mem.
9 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
10 ENGLISH T APE OPERA TIONS Listening to a cassette Y ou can pla y back type 1 (normal) tapes. 1 Open the control panel. 2 Insert a cassette into the cassette compartment. The unit turns on and tape pla y starts automatically . 3 Close the control panel by hand.
11 ENGLISH T o play back tapes recorded with the Dolby B NR* 1 Press MODE to enter the functions mode while listening to a tape. “MODE” appears on the lower part of the displa y , and the number buttons w ork as different function b uttons. 2 Press (Dolby B), while “MODE” is still on the display so that the (Dolby B) indicator lights up .
12 ENGLISH Other convenient tape functions Skipping the blank portions on the tape Y ou can skip blank portions between the tunes (Blank Skip). When this function is on, the unit skips blank por tions of 15 seconds or more, f ast-forwards to the ne xt tune, then star ts playing it.
13 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to y our preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: Indication T o do: Range BAS Adjust the bass.
14 ENGLISH Indication For: Preset values BAS TRE LOUD USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP HOP Funk or Rap +02 00 ON music JAZZ Jazz music +02 +03 OFF JAZZ POPS USER ROCK CLASSIC HIP HOP Ex.
15 ENGLISH • When “C-EQ LINK” is set to “LINK ON,” The selected sound mode can be stored in memor y f or the current source. Each time you change to the same source, the same sound mode is also recalled and shown on the display . The C-EQ indicator also flashes.
16 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (See page 17.) 2 Set the hour . 1 Select “CLOCK H (hour)” if not sho wn on the display .
17 ENGLISH 1 2 Select. Hold. 3 Advance Back Back Adv ance 1:00 16 LINK ON 15, 18 LINK OFF Counter- clockwise F actor y-preset settings Set. See page Clockwise CLOCK H Hour adjustment CLOCK M Minute adjustment C-EQ LINK Custom equalizer linkage LEVEL Le v el display DIMMER Dimmer mode B.
18 ENGLISH T o set Custom Equalizer Link – C-EQ LINK A different sound mode (C-EQ) can be stored in memory for each source so that you can change the sound modes simply by changing the sources . When shipped from the factory , this mode is deactivated.
19 ENGLISH Attaching the control panel 1 Insert the right side of the control panel into the groo ve on the panel holder . 2 Press the left side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you frequently detac h the contr ol panel, the connectors will deteriorate .
20 ENGLISH CD CHANGER OPERA TIONS W e recommend that you use one of the CH-X series with your unit. If you ha ve another CD automatic changer , consult your JVC car audio dealer f or connections. • F or e xample, if your CD automatic chang er is one of the KD-MK series, you need a cor d (KS-U15K) for connecting it to this unit.
21 ENGLISH T o go to the next discs or the previous discs Press 5 , while playing a disc, to go to the ne xt disc. Each time you press the button consecutiv ely , the first track of the ne xt disc is located and play ed back. Press ∞ , while pla ying a disc, to go to the pre vious disc.
ENGLISH 22 EXTERNAL COMPONENT OPERA TIONS Playing an external component Y ou can connect the e xternal component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).
23 ENGLISH MAINTENANCE This unit requires v er y little attention, but y ou will be able to e xtend the life of the unit if you f ollow the instructions below . T o clean the head • Clean the heads after ev er y 10 hours of use using a wet-type head cleaning tape (av ailable at an audio store).
24 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw ays serious. Check the f ollowing points before calling a service center . Symptoms • A cassette tape cannot be inser ted. • A cassette tape cannot be ejected. • Cassette tapes become hot.
25 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear : 50 W per channel Continuous P ower Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8 % total harmonic distor tion.
EN, SP , FR 0102KKSMDTJEIN VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help y ou! http://www . j v cmobil e.
1 KS-FX480 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A. INST ALACION (MONT AJE EN EL T ABLERO DE INSTRUMENTOS) • La siguiente ilustración muestra una instalación típica.
2 • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubier ta • Lors de l’installation de l’appareil sans utiliser de manchon In a T oyota f or example , first remov e the car radio and install the unit in its place.
3 L R + - + - + - + - L R + - + - + - + - L R + - + - + - + - PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
4 INPUT R L LINE OUT (REAR) L R L R LINE OUT (FRONT) * R L R L INPUT R L LINE OUT REAR FRONT * Connecting the leads / Conexión de los conductores / Raccordement des fils CAUTION / PRECAUCION / PRECAUTION: • T o prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.
An important point after buying a device JVC KS-FX480J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KS-FX480J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KS-FX480J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KS-FX480J you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KS-FX480J will certainly help you make a decision on the purchase.
If you already are a holder of JVC KS-FX480J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KS-FX480J.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KS-FX480J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KS-FX480J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
