Instruction/ maintenance manual of the product KD-S12 JVC
Go to page of 20
ENGLISH ESP AÑOL CD RECEIVER KD-S12 RECEPTOR CON CD KD-S12 For canceling the display demonstration, see page 7. Para cancelar la demostración en pantalla, consulte la página 7. For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 How to detach/attach the control panel ..
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this unit” (see page 15). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-S12 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (sel.
6 ENGLISH Getting started Basic operations ~ Ÿ You cannot select “CD” as the playback source if there is no disc in the loading slot. ! Volume level appears. Volume level indicator ⁄ Adjust the sound as you want. (See page 12.) To drop the volume in a moment (ATT) To restore the sound, press it again.
7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 13. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
9 ENGLISH Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station 3 “SSM” flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band.
10 ENGLISH Disc operations Playing a disc To go to the next or previous tracks To go to a particular track directly To select a number from 01 – 06: To select a number from 07 – 12: Prohibiting disc ejection You can lock a disc in the loading slot.
11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up.
12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Indication For: Preset values BAS * 1 TRE * 2 LOUD .
13 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
14 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
15 ENGLISH More about this unit Basic operations Turning on the power • By pressing CD or FM/AM on the unit, you can also turn on the power. If the source is ready, playback also starts.
16 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
17 ENGLISH Specifications AUDIO AMPLIFIER SECTION Power Output: 18 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω ) Load Impedance: 4 Ω (4 Ω.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! © 2005 Victor Company of Japan, Limited EN, SP 0705DTSMDTJEIN Rear_KD-S12[J]f.
KD-S12 Installation/Connection Manual Manual de instalación/conexión GET0317-002A [J] 0705DTSMDTJEIN EN, SP J Handles F Washer (ø5) G Lock nut (M5) H Mounting bolt— M5 x 20 mm (M5 x 13/16 " ) I Rubber cushion A / B Hard case/Control panel C Sleeve D Trim plate E Power cord Do the required electrical connections.
Heat sink 2 TROUBLESHOOTING • The fuse blows. * Are the red and black leads connected correctly? • Powe r ca nnot b e tu rne d on . * Is the yellow lead connected? • No so un d fro m th e sp ea kers . * Is the speaker output lead short-circuited? • Sound is distorted.
An important point after buying a device JVC KD-S12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-S12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-S12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-S12 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-S12 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-S12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-S12.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-S12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-S12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
