Instruction/ maintenance manual of the product KD-G731 JVC
Go to page of 40
CD RECEIVER KD-G731 For installation and connections, refer to the separate manual. INSTRUCTIONS GET0431-003A [EX/EU] For canceling the display demonstration, see page 4.
ENGLISH 2 How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see page 14). How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects.
ENGLISH 3 How to use functions mode If you press M MODE, the unit goes into functions mode, then the number buttons (except “4”) and 5 / ∞ buttons work as different function buttons. Caution on volume setting: Discs and connected USB devices produce very little noise compared with other sources.
ENGLISH 4 INTRODUCTIONS Preparation Cancel the display demonstration and set the clock • See also page 26. ~ Turn on the power. Ÿ Enter the PSM settings. ! ] ⁄ Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK H” (hour), then adjust the hour.
ENGLISH 5 OPERATIONS Basic operations Using the control panel 1 Select the source. FM/AM = DAB * = CD * = USB * = CD-CH * / IPOD * /D.PLAYER * (or EXT IN ) = BT-PHONE (Bluetooth Phone) * = BT-AUDIO (Bluetooth Audio) * = (back to the beginning) * You cannot select these sources if they are not ready or not connected.
ENGLISH 6 Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).
ENGLISH 7 OPERATIONS Warning: To prevent accidents and damage • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. • Store the battery in a place where children cannot reach.
ENGLISH 8 When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost. • MO indicator lights up. FM station automatic presetting — SSM (Strong-station Sequential Memory) You can preset up to six stations for each band.
ENGLISH 9 OPERATIONS Storing your favorite programme types You can store your favorite PTY codes into the number buttons. 1 Select a PTY code (see right column).
ENGLISH 10 Activating/deactivating TA/PTY Standby Reception TA Standby Reception Indicator PTY Standby Reception Indicator Press to activate. See page 26. The unit temporarily will switch to Traffic Announcement (TA), if available, from any source other than AM*.
ENGLISH 11 OPERATIONS Disc operations Open the control panel and insert the disc. Playback starts automatically. To stop play and eject the disc • Press SRC to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure.
ENGLISH 12 After pressing , press the following buttons to... Disc type Skip 10 tracks (within the same folder) TRK RPT : Repeat current track FLDR RPT : Repeat current folder FLDR RND : Randomly play.
ENGLISH 13 OPERATIONS To stop play and detach the USB device Straightly pull it out from the unit. • Press SRC to listen to another playback source. Cautions: • Avoid using the USB device if it might hinder your safety driving. • Do not pull out and attach the USB device repeatedly while “CHECK” is flashing on the display.
ENGLISH 14 Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. See also page 23. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
ENGLISH 15 EXTERNAL DEVICES 2 Select a device you want to connect. 3 Use “OPEN’ or “SEARCH’ to connect. To connect/disconnect a registered device 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Select a registered device you want to connect/disconnect.
ENGLISH 16 When a call comes in.... The source is automatically changed to “BT-PHONE.” When “AUTO ANS” (answer) is activated.... The unit answers the incoming calls automatically, see page 28. • When “AUTO ANS” (answer) is deactivated, press any button (except /control dial) to answer the incoming call.
ENGLISH 17 EXTERNAL DEVICES You can preset up to six phone numbers. 1 Display the Dial Menu. 2 Select “PH BOOK,“ “MISSED,” or “RECEIVED” whichever you want to use. 3 Select a phone number. 4 Making a call You can make a call using the following methods.
ENGLISH 18 Using the Bluetooth audio player ~ Select “BT-AUDIO.” If playback did not start automatically, operate the Bluetooth audio player to start playback.
ENGLISH 19 EXTERNAL DEVICES Preparation Make sure “CHANGER” is selected for the external input setting, see page 27. ~ Select “CD-CH.” Ÿ Select a disc to start playing. Press: For selecting disc number 1 – 6. Hold: For selecting disc number 7 – 12.
ENGLISH 20 Listening to the DAB tuner Change the display information Select preset service. You can connect a JVC DAB tuner to the CD changer jack on the rear of the unit. See also page 23. ~ Select “DAB.” Ÿ Select the bands. ! Searching for an ensemble.
ENGLISH 21 EXTERNAL DEVICES Listening to the iPod / D. player Change the display information 1 Enter the main menu. This mode will be canceled if no operations are done for about 5 seconds. 2 Select the desired menu. For iPod: PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS Ô GENRES Ô COMPOSER Ô (back to the beginning) For D.
ENGLISH 22 Listening to the other external components You can connect an external component using the following adapters (separately purchased) to the CD changer jack on the rear of the unit.
ENGLISH 23 EXTERNAL DEVICES Concept diagram of the external device connection For connection, see Installation/Connection manual (separate volume). • Connection 1 (integrated connection) JVC CD changer, [18] Apple iPod, [21] JVC D.
ENGLISH 24 Selecting a preset sound mode Indication (For) BAS (bass) MID (mid-range) TRE (treble) LOUD (loudness) USER (Flat sound) 00 00 00 OFF ROCK (Rock or disco music) +03 00 +02 ON CLASSIC (Class.
ENGLISH 25 SETTINGS Continued on the next page General settings — PSM You can change PSM (Preferred Setting Mode) items listed in the table on pages 26 and 27. 1 Enter the PSM settings. 2 Select a PSM item. 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary.
ENGLISH 26 Indication Item ( : Initial) Setting, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [4].
ENGLISH 27 SETTINGS Indication Item ( : Initial) Setting, [reference page] DAB AF * 4 Alternative frequency reception • AF ON • AF OFF : Traces the programme among DAB services and FM RDS stations, [20].
ENGLISH 28 SETTINGS Setting menu ( : Initial) AUTO CNT (connect) When the unit is turned on, the connection is established automatically with.... OFF : No Bluetooth device. LAST : The last connected Bluetooth device. ORDER : The available registered Bluetooth device found at first.
ENGLISH 29 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 30 General Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
ENGLISH 31 REFERENCES – Discs are dirty or scratched. – Moisture condensation occurs on the lens inside the unit. – The pickup lens inside the unit is dirty. – CD-R/CD-RW on which the files are written with “Packet Write” method. – There are improper recording conditions (missing data, etc.
ENGLISH 32 Playing MP3/WMA/AAC/WAV tracks from a USB device • Connecting a USB device automatically changes the source to “USB.” • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
ENGLISH 33 REFERENCES Detaching a USB device • After removing a USB device, “NO USB“ appears and you cannot operate some of the buttons. Reattach a USB device or press SRC to select another playback source. Bluetooth operations General • While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc.
ENGLISH 34 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 35 REFERENCES Symptom Remedy/Cause MP3/WMA/AAC • Tracks do not play back in the order you have intended them to play. Playback order is determined when files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 36 Symptom Remedy/Cause Bluetooth * • Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device.
ENGLISH 37 REFERENCES Symptom Remedy/Cause DAB • “noSIGNAL” appears on the display. Move to an area with stronger signals. • “RESET 08” appears on the display. Connect this unit and the DAB tuner correctly and reset the unit (see page 2). • The DAB tuner does not work at all.
ENGLISH 38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front and rear: 50 W per channel Continuous Power Output (RMS): Front and rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 39 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
EN, FR 0107DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2007 Victor Company of Japan, Limited Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
An important point after buying a device JVC KD-G731 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-G731 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-G731 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-G731 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-G731 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-G731, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-G731.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-G731. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-G731 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
