Instruction/ maintenance manual of the product GET0623-006A JVC
Go to page of 62
1 1 Turn on the power. 2 3 KD-R218 CD RECEIVER : INSTRUCTIONS/INSTALLATION 1009DTSMDTJEIN EN © 2009 Victor Company of Japan, Limited Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
2 Listening to the radio ~ ] “FM” or “AM” Ÿ “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength. Listening to the disc ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or eject the disc.
3 Category Menu item Selectable setting, [ Initial: Underlined ] TUNER SSM * 2 • SSM 01 – 06 • SSM 07 – 12 • SSM 13 – 18 : For settings, see “Automatic presetting (FM)—SSM (Strong- station Sequential Memory)” on page 2. AREA • AREA US • AREA EU • AREA SA : When using in North/Central/South America.
4 Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Make sure the unit is not muted/paused. • Check the cords and connections. “PROTECT” appears on the display and no operations can be done.
FRANÇAIS ENGLISH GET0624-003A [E/EU] EN, FR 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to read this manual The following icons/symbols are used to indicate: Press and hold the button(s) until the desired operation begins. Turn the control dial.
4 ENGLISH 1 Turn on the power. 2 3 Setting the clock 4 Select <DEMO OFF>. 5 6 Finish the procedure. Canceling the display demonstration 6 Adjust the minute. 7 Select <24H/12H>. 8 Select <24 HOUR> or <12 HOUR>. 9 Finish the procedure.
5 ENGLISH Basic operations Control dial Ejects the disc Loading slot Remote sensor (for KD-R412/KD-R411) You can control this unit with an optionally purchased remote control, RM-RK50 ( 12). Display window Auxiliary input jack Detaches the panel When you press or hold the following button(s).
6 ENGLISH Manual search [Hold] “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select <MONO OFF>.
7 ENGLISH Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 ] “92.50MHz” 2 “PRESET MODE” flashes. 3 ] Selects preset number “04.” “P04” flashes and “MEMORY” appears.
8 ENGLISH Stopping playback and ejecting the disc “NO DISC” appears. Press / SOURCE to listen to another playback source. Listening to a disc ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or eject the disc.
9 ENGLISH Selects folder of the MP3/WMA Selects track Fast-forwards or reverses the track Selecting a track/folder 1 2 For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2 . • To return to the previous menu, press BACK .
10 ENGLISH Listening to the USB device (For KD-R412/KD-R411/KD-R35) This unit can play MP3/WMA tracks stored in a USB device. ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or detach the USB device. If a USB device has been attached.
11 ENGLISH Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected for the <SRC SELECT> = <AUX IN> setting.
12 ENGLISH 1 • Turns the power on if pressed briefly. When the power is on, pressing the button also mutes the sound or pauses. To cancel muting or resume playback, press the same button again. • Turns the power off if pressed and held. 2 • Changes the preset stations.
13 ENGLISH Selecting a preset sound mode You can select a preset sound mode suitable for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
14 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] CLOCK 24H/12H Time display mode • 24 HOUR • 12 HOUR : For settings, 4. CLOCK ADJ * 1 Clock adjustment • AUTO • OFF : The built-in clock is automatically adjusted using the CT (clock time) data in the Radio Data System signal.
15 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] TUNER TA VOLUME * 5 Traffic announcement volume • VOLUME 00 – VOLUME 50 (or VOLUME 00 – VOLUME 30) * 6 [ VOLUME 15 ] : — P-SEARCH * 5 Programme search • SEARCH ON • SEARCH OFF : Activates Programme Search.
16 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO VOL ADJUST Volume adjust (For KD-R412/ KD-R411/KD-R35) VOL ADJ –05 — VOL ADJ +05 [ VOL ADJ 00 ] : Preset the volume adjustment level of each source (except FM), compared to the FM volume level.
17 ENGLISH More about this unit Basic operations General • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. • If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.
18 ENGLISH • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: – Discs are dirty or scratched. – Moisture condensation has occurred on the lens inside the unit. – The pickup lens inside the unit is dirty.
19 ENGLISH Playing MP3/WMA tracks from a USB device (for KD-R412/KD-R411/ KD-R35) • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
20 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.
21 ENGLISH Troubleshooting Symptom Remedy/Cause General Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Make sure the unit is not muted/paused ( 5). • Check the cords and connections. “PROTECT” appears on the display and no operations can be done.
22 ENGLISH Symptom Remedy/Cause MP3/WMA playback Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
23 ENGLISH Symptom Remedy/Cause USB device playback (for KD-R412/KD-R411/KD-R35) Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.
24 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/ Rear: 50 W per channel Continuous Power Output (RMS): Front/ Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
25 ENGLISH CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
FRANÇAIS ENGLISH GET0624-003A [E/EU] EN, FR 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4.
1 KD-R312/KD-R311 Installation/Connection Manual Manuel d’installation/raccordement ENGLISH / FRANÇAIS 1009DTSMDTJEIN EN, FR © 2009 Victor Company of Japan, Limited GET0624-010A [E/EU] Bracket / S.
2 1. When the connector on the vehicle side is a ISO terminal (same terminal as this unit) / Lorsque le connecteur du côté véhicule est une prise ISO (même terminal que cet appareil) • The connector of the vehicle and this unit having the SAME pin array.
1 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
2 Listening to the disc ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or eject the disc. Listening to the external components You can connect an external component to the AUX (auxiliary) input jack on the control panel.
3 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU . Category Menu item Selectable setting, [ Initial: Underlined ] DEMO DEMO • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds.
4 More about this unit – Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows extension • The maximum number of characters for file/folder names (includes 4 extension characters—<.mp3> or <.wma>): 12 — 128 characters (depending on the media used, etc.
ENGLISH GET0623-001A [U/UH] EN, TH 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / CD RECEIVER / KD-R416 / KD-R415 / KD-R316 / KD-R315 INSTRUCTIONS For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to attach/detach the control panel How to reset your unit Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, 8. • Be careful not to drop the disc when it ejects.
4 ENGLISH 1 Turn on the power. 2 3 Setting the clock 1 Turn on the power. 2 3 Select <CLOCK>. 4 Select <CLOCK SET>. 5 Adjust the hour. 6 Adjust the minute.
5 ENGLISH Warning (to prevent accidents and damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. • Store the battery in a place where children cannot reach.
6 ENGLISH Basic operations Control dial Ejects the disc Loading slot Remote sensor • DO NOT expose to bright sunlight. Display window Auxiliary input jack Detaches the panel When you press or hold the following button(s)... Main unit Remote controller General operation Turns on.
7 ENGLISH Manual search “M” flashes, then press the button repeatedly. When an FM stereo broadcast is hard to receive 1 2 ] <TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure to select <MONO OFF>.
8 ENGLISH Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 ] “92.50MHz” 2 “PRESET MODE” flashes. 3 ] Selects preset number “04.” “P04” flashes and “MEMORY” appears.
9 ENGLISH Selects folder of the MP3/WMA Selects track Fast-forwards or reverses the track Selecting a track/folder 1 2 For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2 . • To return to the previous menu, press BACK .
10 ENGLISH Listening to a USB device (For KD-R416/KD-R415) This unit can play MP3/WMA tracks stored in a USB device. ~ ] Turn on the power. Ÿ All tracks will be played repeatedly until you change the source or detach the USB device. If a USB device has been attached.
11 ENGLISH Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected for the <SRC SELECT> = <AUX IN> setting.
12 ENGLISH Selecting a preset sound mode You can select a preset sound mode suitable for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = BASS BOOST = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
13 ENGLISH Menu operations 1 2 3 Repeat step 2 if necessary. • To return to the previous menu, press BACK . • To exit from the menu, press DISP or MENU .
14 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO FADER * 3 R06 – F06 [ 00 ] : Adjust the front and rear speaker output balance.
15 ENGLISH Category Menu item Selectable setting, [ Initial: Underlined ] AUDIO BEEP • BEEP ON • BEEP OFF : Activates the keypress tone. : Deactivates the keypress tone.
16 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.
17 ENGLISH More about this unit Basic operations General • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. • If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.
18 ENGLISH • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or a protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit.
19 ENGLISH – Bit rate of MP3/WMA: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Sampling frequency of WMA: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz • This unit can play back MP3 files recorded in VBR (variable bit rate).
20 ENGLISH Symptom Remedy/Cause Disc playback Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording.
21 ENGLISH Symptom Remedy/Cause USB device playback (for KD-R416/KD-R415) Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) “READING” keeps flashing on the display.
22 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/ Rear: 50 W per channel Continuous Power Output (RMS): Front/ Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
23 ENGLISH CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 93 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
ENGLISH GET0623-001A [U/UH] EN, TH 1009DTSMDTJEIN © 2009 Victor Company of Japan, Limited For canceling the display demonstration, see page 4. / CD RECEIVER / KD-R416 / KD-R415 / KD-R316 / KD-R315 INSTRUCTIONS For installation and connections, refer to the separate manual.
1 KD-R416/KD-R415/ KD-R316/KD-R315 Installation/Connection Manual / ENGLISH / 1009DTSMDTJEIN EN, TH © .
2 • The fuse blows. ] Are the red and black leads connected correctly? • Power cannot be turned on. ] Is the yellow lead connected? • No sound from the speakers. ] Is the speaker output lead short-circuited? • “PROTECT” appears on the display and no operation can be done.
An important point after buying a device JVC GET0623-006A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GET0623-006A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GET0623-006A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GET0623-006A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GET0623-006A will certainly help you make a decision on the purchase.
If you already are a holder of JVC GET0623-006A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GET0623-006A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GET0623-006A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GET0623-006A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
