Instruction/ maintenance manual of the product GD-V4200PCE-G JVC
Go to page of 32
1 ENGLISH INSTR UCTIONS Model GD-V4200PZW GD-V4200PZW -G GD-V4200PCE GD-V4200PCE-G Page Safety Precautions .................................................... 2 Parts Identification ..................................................... 4 • Remote Control .
2 FCC NO TICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH – Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or similar surface.
4 Parts Identification Remote Control 1 Remote signal transmission window 2 DISPLA Y button (page 12) Use this button to display the input terminal, color system (for VIDEO A or B input), scan system (for COMPONENT input) and horizontal/vertical fr equency (for RGB input).
5 ENGLISH Monitor: Front View Bottom View 1 Remote sensor/power lamp Point the front end of the wir eless remote control toward here. When the Monitor is turned on, the power lamp glows green. It glows r ed in standby mode. 2 Self-diagnostic lamps (page 29) These lamps light/flash if something abnormal occurs with the Monitor .
6 78 9 p RS232C CONTROL AC INPUT MAIN POWER REMOTE CONTROL WIRED (MUL TIPLE MONITOR ADJUSTMENT) (120/230V) SPEAKER OUT I IN OUT INTERNAL EXTERNAL 123 45 6 AUDIO PC AUDIO VIDEO AUDIO VIDEO AUDIO VIDEO .
7 ENGLISH 8 VIDEO B terminals (page 11)* • Y/C (S video) input terminal (Y/C terminal) Connect this terminal to the S-video output terminal of a VCR, etc. • V ideo input terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc.
8 Preparations Checking the Accessories The following accessories ar e included with the Monitor . Check for them. If any item is missing, please contact the dealer where you purchased the Monitor . • Remote control (RM-C575) x 1 • Remote control cable x 1 • Power cord (appr ox.
9 ENGLISH Precautions • When mounting the Monitor vertically , it is necessary to adjust the cooling fan speed to pr ovide better heat dissipation. Do not forget to perf orm this adjustment.
10 Precautions • Befor e making connections, turn of f all the equipment. • Plugs should be firmly inserted; poor connection could cause noise. • T o unplug a cord, be sur e to grasp its plug and pull it out. • Connect the power cor d after having finished all other connections.
11 ENGLISH DISPLAY ASPECT POWER RGB COMPO. VIDEO B VOLUME MULTIPLE MODE ID SET MONITOR ADJUSTMENT VIDEO A MUTING MENU/EXIT RM-C575 REMOTE CONTROL UNIT ID RS232C CONTROL AC INPUT MAIN POWER REMOTE CONT.
12 Basic Operations Daily Operations 1 T ur n on the main power . Set MAIN POWER on the back of the Monitor to ON. The POWER lamp on the upper left of the front panel glows red. 2 T ur n on the power . Press POWER on the remote contr ol to turn the power on.
13 ENGLISH Changing the Aspect Ratio Precautions for using the screen mode switching function • This Monitor features a screen mode switching (aspect ratio change) function. If you select a mode dif fer ent in aspect ratio fr om softwar e such as TV pr ograms, the picture may look dif fer ent fr om original picture.
14 Video Adjustments DISPLA Y ASPECT POWER RGB COMPO. VIDEO B VOLUME MUL TIPLE MODE ID SET MONITOR ADJUSTMENT VIDEO A MUTING MENU/EXIT RM-C575 REMOTE CONTROL UNIT ID MENU/EXIT 2 / 3 5 / 5 For video adjustments, use menus. Y ou can use the buttons either on the remote contr ol or on Monitor for menu operations.
15 ENGLISH CONTRAST BRIGHT CHROMA PHASE SHARPNESS sub menu reset ADJUST: PICTURE ADJ. SELECT: EXIT: MENU VIDEO A : +01 : : –02 : : 00 00 00 SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU This item appears only when the “RGB” input is selected.
16 MENU INPUT POWER MENU INPUT POWER MENU 2 / 3 5 5 / + – :+01 CONTRAST CONTRAST BRIGHT PHASE SHARPNESS CHROMA Are you sure? "YES" then press key. "NO" then press key MENU reset Video Adjustments (Continued) DISPLA Y ASPECT POWER RGB COMPO.
17 ENGLISH 4 Pr ess 5 / ∞ to move the cursor ( 3 ) to the item you want to adjust. 5 Pr ess 2 / 3 to adjust the selected item. 6 Repeat steps 4 and 5 to adjust the other items. 7 Pr ess MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations.
18 Video Adjustments (Continued) MENU INPUT POWER MENU INPUT POWER MENU 2 / 3 5 5 / DISPLA Y ASPECT POWER RGB COMPO. VIDEO B VOLUME MUL TIPLE MODE ID SET MONITOR ADJUSTMENT VIDEO A MUTING MENU/EXIT RM-C575 REMOTE CONTROL UNIT ID MENU/EXIT 2 / 3 5 / 5 This item appears only when the “RGB” input is selected.
19 ENGLISH Setting the Receivable Signal T ypes Y ou can set the r eceivable signal types. Normally , select “AUTO.” A common setting will apply to both VIDEO A and B terminals, and a dif ferent setting will apply to the COMPONENT terminal. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu.
20 T o set the other convenient functions, use menus. Y ou can use the buttons either on the remote contr ol or on Monitor for menu operations. • Refer also to “Menu Classifications” on pages 26 and 27. Showing On-screen Display The input mode and signal type will be indicated on the scr een.
21 ENGLISH 3 Pr ess 2 / 3 to select the desir ed amount of time. Select the number of minutes befor e the Monitor goes into standby mode after the signal has ceased to be supplied. Each time you pr ess the button, the amount of time changes as follows: T o cancel the Power Saving function, select “OFF .
22 Other Convenient Functions (Continued) MENU INPUT POWER MENU INPUT POWER MENU 2 / 3 5 5 / DISPLA Y ASPECT POWER RGB COMPO. VIDEO B VOLUME MUL TIPLE MODE ID SET MONITOR ADJUSTMENT VIDEO A MUTING MEN.
23 ENGLISH Cursor ( 3 ) POWER SAVE CONTROL LOCK STATUS DISPLAY SCREEN SAVER WHITE BACK VENTILATION MODE WHITE BALANCE all reset HOUR METER x100h SET-UP MENU ADJUST: SELECT: EXIT: MENU : 1MIN.
24 Serial Connections and Operations When the Monitors are serially connected, you can control all of them at the same time (simultaneous operation) or contr ol them one by one separately (individual operation). For individual operation, you have to assign an ID number to each of the Monitors.
25 ENGLISH Operating the Monitors Simultaneously • Check that no ID number is shown on the screens. If any ID numbers are shown, pr ess MODE to erase them. • The following procedure should be performed slowly and securely . Example: When adjusting “CONTRAST”: 1 Pr ess MENU/EXIT to display the Main Menu.
26 Menu Classifications Main Menu SIZE/POSITION ADJ. PICTURE ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU COLOR TEMP. ASPECT SIGNAL MODE reset FUNCTION SELECT ADJUST: SELECT: EXIT: MENU : HIGH : PANORAMA : AUTO VIDEO A NTSC H SIZE H POSITION V SIZE V POSITION CLOCK PHASE sub menu reset ADJUST: SIZE/POSITION ADJ.
27 ENGLISH SIZE/POSITION ADJ.* : See page 14. H.SIZE* Adjusts the horizontal screen size. H. POSITION* Adjusts the horizontal screen position. V . SIZE* Adjusts the vertical screen size. V .POSITION* Adjusts the vertical scr een position. CLOCK PHASE* Adjusts to eliminate stripes or flickering.
28 T roubleshooting Solutions to common problems related to the Monitor ar e described her e. If none of the solutions presented here solves the problem, unplug the Monitor and consult an authorized dealer or service center .
29 ENGLISH Self-diagnostic Indication The screen monitor may automatically turn of f and self-diagnostic lamps next to the power lamp may light or flash. When something abnormal occurs with the Monitor , this function informs you of the condition of the Monitor with self- diagnostic lamps, allowing for smooth service work.
30 Specifications Gener al: Model name GD-V4200PZW/GD-V4200PZW -G/GD-V4200PCE/GD-V4200PCE-G Frame colour GD-V4200PZW/GD-V4200PCE : Silver GD-V4200PZW -G/GD-V4200PCE-G : Gray Screen size T ype 42 wide format Aspect ratio 16:9 (W ide format) Mass 36.0 kg (79.
31 ENGLISH Pin assignment (Specifications for terminals) • Y/C terminal 1 2 3 4 Pin number Signal name 1 GND (Y) 2 GND (C) 3Y 4C • RS-232C terminal Pin number Signal name 1 DCD 2R D 3T D 4 DTR 5 G.
32 24-32.GD-V4200PZW-A[EN]/f 00.2.23, 5:19 PM 32.
An important point after buying a device JVC GD-V4200PCE-G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GD-V4200PCE-G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GD-V4200PCE-G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GD-V4200PCE-G you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GD-V4200PCE-G will certainly help you make a decision on the purchase.
If you already are a holder of JVC GD-V4200PCE-G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GD-V4200PCE-G.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GD-V4200PCE-G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GD-V4200PCE-G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
