Instruction/ maintenance manual of the product Colour Video Monitor TM-A140E JVC
Go to page of 16
TM-A140E PHASE CHROMA BRIGHT CONTRAST MENU INPUT SELECT VOLUME/SELECT – + B A POWER ON OFF INSTR UCTIONS TM-A140E ESP AÑOL IT ALIANO FRANÇAIS DEUTSCH ENGLISH BEDIENUNGSANLEITUNG : F ARB-VIDEO-MONI.
2 PRECAUTIONS ● Use only the power source specifi ed on the unit. ● When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet. ● Do not allow anything to rest on the power cord.
3 ENGLISH CONTENTS SAFETY PRECAUTIONS ............................................................................................ 2 CONTROLS AND FEATURES .................................................................................... 4 HOW TO HANDLE BASIC OPERATIONS .
4 TM-A140E PHASE CHROMA BRIGHT CONTRAST MENU INPUT SELECT VOLUME/SELECT – + B A POWER ON OFF CONTROLS AND FEATURES FRONT VIEW <Front Panel> 1 Phase button [PHASE ] Press this button to set the picture hue adjustment mode. Adjust the value with the VOLUME/SELECT buttons.
5 ENGLISH IN OUT A VIDEO AUDIO IN Y/C IN OUT IN OUT BA B r Video A terminals [VIDEO A IN/OUT] Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. IN : Video signal input terminal OUT : Bridge-connected video signal output terminal Notes: * For corresponding audio signals, use the AUDIO A terminals y .
6 1. Press select button corresponding to the item you want to adjust. The item you select is displayed on the screen. 1 PHASE ( ) : Phase control 2 CHROMA ( ) : Chroma control 3 BRIGHT ( ) : Brightness control 4 CONTRAST ( ) : Contrast control 2. Adjust with the VOLUME/SELECT buttons.
7 ENGLISH You can set the following menu items. Set them depending on your needs. • SHARPNESS • COLOR SYSTEM 1. Press the MENU button. The <MENU> screen is displayed. 2. Press the PHASE ( ) or CHROMA ( ) button to select MENU items. A selection mark ( 3 ) is put next to the selected item.
8 You can set the following set-up menu items. ● H. POSITION ● WHITE BALANCE ● CONTROL LOCK Note: ● Parameters for H. POSITION can be set separately depending on the video input (Input A or Input B) selected by the input select buttons on the front panel.
9 ENGLISH 4. To set the other set-up menu items, repeat the procedures 2 and 3. 5. Press the MENU button to quit. Front panel button Function displayed Contents MENU EXIT Quit (or Release) the <MENU> screen.
10 You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values. 1. Press the POWER ( ) switch to turn the power OFF ( — ). 2. While pressing both MENU button and PHASE ( ) button, press the POWER ( ) switch to turn the power ON ( _ ).
11 ENGLISH BASIC CONNECTION EXAMPLE Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected.
12 TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply.
13 ENGLISH SPECIFICATIONS MODEL TM-A140E Type Colour video monitor Colour system PAL, NTSC (3.58) Picture tube 36 cm measured diagonally, 90° defl ection, in-line gun, vertical line trio type (phosphor stripe pitch 0.64 mm) Effective screen size Width 280.
14 368.5 363.5 1.5 5 3.5 63.7 273 346 284 310 287 * * 217 TM-A140E PHASE CHROMA BRIGHT CONTRAST MENU INPUT SELECT VOLUME/SELECT – + B A POWER ON OFF 7 Dimensions Unit : mm < Front View > < Side View > 7 Y/C (Mini DIN 4 pin) terminal specifi cation Pin No.
15 ENGLISH 02-15EN_TM-A140E_f.indd 15 02-15EN_TM-A140E_f.indd 15 06.6.8 7:53:32 PM 06.6.8 7:53:32 PM.
© 2006 Victor Company of Japan, Limited 0606STH-MW -MT TM-A140E cover4_TM-A140E_f.indd 72 cover4_TM-A140E_f.indd 72 06.6.8 7:54:09 PM 06.6.8 7:54:09 PM.
An important point after buying a device JVC Colour Video Monitor TM-A140E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC Colour Video Monitor TM-A140E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC Colour Video Monitor TM-A140E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC Colour Video Monitor TM-A140E you will learn all the available features of the product, as well as information on its operation. The information that you get JVC Colour Video Monitor TM-A140E will certainly help you make a decision on the purchase.
If you already are a holder of JVC Colour Video Monitor TM-A140E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC Colour Video Monitor TM-A140E.
However, one of the most important roles played by the user manual is to help in solving problems with JVC Colour Video Monitor TM-A140E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC Colour Video Monitor TM-A140E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
