Instruction/ maintenance manual of the product CA-MXJ10 JVC
Go to page of 32
L VT0301-003A [ B ] For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. CA-MXJ10 INSTRUCTIONS STANDBY PLAY & EXCHANGER PHONES FM/AM TAPE AUX P.
Warnings, Cautions and Others IMPORT ANT for the U.K. DO NOT cut of f the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appro- priate safety approved extension lead or consult your dealer .
IMPORT ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER : Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION : Do not open the top cover. There are no user service- able parts inside the Unit; leave all servicing to qualified service personnel.
1 Thank you for purchasing the JVC Compact Component System. W e hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. Here you will find all the information you need to set up and use the system.
2 T able of Contents Getting Started ................................................ 3 Accessories ................................................................ 3 How to Put Batteries in the Remote Control ............. 3 Using the Remote Control .
3 Getting Started Accessories Check that you have all of the following items, which are supplied with the System. AM (MW/L W) Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) If any of these items is missing, contact your dealer immediately .
4 CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the FM Antenna A. Using the Supplied Wir e Antenna The FM W ire Antenna provided can be connected to a FM 75 Ω COAXIAL as temporary measure. Extend the supplied wire antenna horizontally .
5 CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the Speakers Please refer to instructions for speakers as well when you connect speakers. For each speaker , connect one end of the speaker wire to the speaker terminals on the back of the System.
6 COMPU PLA Y COMPU PLA Y is JVC’ s feature that lets you control the most frequently used functions of the System with a single touch. One T ouch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the play button for that function.
7 Common Operations STANDBY PLAY & EXCHANGER PHONES FM/AM TAPE AUX P.UP P.DOWN CD TUNING UP DECK A/B DUBBING REC START/STOP CD REC START REV. MODE TUNING DOWN COMPU PLAY CONTROL 1 BIT DUAL D/A CONVERTER COMPACT DIGITAL AUDIO EJECT EJECT PLAY REC/PLA Y AUTO REVERSE AUTO REVERSE SOUND MODE VOLUME REPEAT RANDOM CONTINUE ACTIVE BASS EX.
8 or S.MODE S.MODE or A.BASS EX A.BASS EX or VOLUME VOLUME SOUND MODE ACTIVE BASS EX. ACTIVE BASS EX. SOUND MODE SOUND MODE ACTIVE BASS EX. PHONES Adjusting the V olume T urn the VOLUME control clockwise to increase the volume or anticlockwise to decrease it.
9 Listening to Auxiliary Equipment By playing the sound from auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the connected equipment is playing through the System, you can apply the sound ef fects.
10 Using the T uner Display kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Band display , Frequency display , Preset channel When the System is being used, the display shows other items as well. However , we have only shown the items described in this section.
11 Thr ee ways to select a station —————————————— o Press the TUNING UP or TUNING DOWN button repeatedly to move from frequency to frequency until you find the one you want. (Manual T uning). OR o Press and hold the TUNING UP or TUNING DOWN button for a few seconds, and the frequency starts changing on the display .
12 Using the CD Player 0 Number keys Display kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Disc display Track number, Playing time, Step number Play mode indicator Repeat indicator When the System is being used, the display shows other items as well.
13 The Quickest W ay to Start a CD Is with the One T ouch Operation ————————————————————————— Press the CD £ / 8 button (or the 3 / 8 button on the Remote Control).
14 FM/AM T APE AUX CD or P . UP P . DOWN or 1 CLOCK TIMER SELECT –+ 2 3 456 789 10 + 10 SET Basics of Using the CD Player — Normal Play Playing a Disc ——————————————————————— 1. Prepare the discs. 2. Press the CD £ / 8 or CD1, CD2 or CD3 button of the disc you want to play .
15 Continuous Play This function plays the disc in the Unit continuously . 1. Prepare the discs. 2. Select Continuous mode. On the Unit Press the CONTINUE button. The playback automatically starts from the selected CD. • “CONT .” on the Play mode indicator lights up.
16 PRGM A.BASS EX S.MODE 3. Press the number keys (1 to 10 and +10) to select the track to program. • Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then 10. 4. Repeat steps 2 to 3 to select the other tracks for the pr ogram.
17 Repeating a Selection or the Discs Y ou can have all the discs, the program or the individual selection currently playing repeat as many times as you like. Press the REPEA T button on the Unit. The display changes with each press of the button, as shown below .
18 Using the Cassette Deck (Listening to a T ape) EJECT 0 (Deck B) 0 EJECT (Deck A) Cassette Deck control buttons kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Display : T ape Direction indicator : DECK A, B indicator : Reverse Mode indicator When the System is being used, the display shows other items as well.
19 3. Close the holder gently . When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected. T o change the selected deck, press the DECK A/B button. When using the Remote Control, press the A or B button. 4. Press the T APE ™ £ button (or 2 or 3 button on the Remote Con- trol).
20 Using the Cassette Deck (Recor ding) REC P AUSE Display kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM REC indicator When the System is being used, the display shows other items as well. However, we have only shown the items described in this section.
21 Note: At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Depend- ing on the recording source, the first part of the recording may be missing because of the leader .
22 CONTINUE T o Pause at Any T ime During the Recording Process Press the REC P AUSE button on the Remote Control. Then press either the 2 or 3 button on the Remote Control or REC ST AR T/STOP button on the Unit to restart recording.
23 Using the Timer When the System is being used, the display shows other items as well. However , we have only shown the items described in this section. kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Clock time, timer-on time, etc.
24 SHIFT TIMER 2 SELECT –+ 4 5 8 SET SELECT –+ 4 5 8 SET SELECT –+ 4 5 Setting the Timer o Y ou can set the T imer whether the Unit is on or off.
25 8. Press the SET button. The volume level blinks on the display . 9. Press the SELECT + or – button to set the volume level. 10. Press the SET button. The display returns to the display before you set the timer . Befor e T urning the Unit Off • Check that the selected source is ready .
26 Car e And Maintenance Compact Discs Handle your compact discs, cassette tapes, and Cassette Deck carefully , and they will last a long time. • Remove the CD from the case by holding it at the edges while pressing the centre hole lightly . • Do not touch the shiny surface of the CD, or bend the CD.
27 • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer , for service.
28 Specifications Amplifier Output Power 40 watts per channel, min. RMS, both channels driven into 6 ohms at 1 kHz with no more than 10% total harmonic distortion. (IEC 268-3) 27 watts per channel, min. RMS, both channels driven into 6 ohms at 1 kHz with no more than 0.
VICTOR COMP ANY OF JAP AN , LIMITED EN J V C 0699KSMMDWHIT Cover MX-J10[B] 99.7.6, 10:36 AM 2.
An important point after buying a device JVC CA-MXJ10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC CA-MXJ10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC CA-MXJ10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC CA-MXJ10 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC CA-MXJ10 will certainly help you make a decision on the purchase.
If you already are a holder of JVC CA-MXJ10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC CA-MXJ10.
However, one of the most important roles played by the user manual is to help in solving problems with JVC CA-MXJ10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC CA-MXJ10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
