Instruction/ maintenance manual of the product FC2145W Jonsered
Go to page of 40
FC2145 FC2145S BC2145 FC2145W Oper ator’ s manual (EP A) Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine .
2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injur y to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine .
English – 3 CONTENTS Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . Long-term exposure to noise can result in permanent hear ing impairment.
4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Jonsered product! Y our purchase gives y ou access to prof essional help with repairs and ser vice whenev er this may be necessary .
English – 5 WHA T IS WHA T? What is what on the c learing saw? (BC 2145) 26 27 28 6 3 51 7 4 22 24 33 9 32 8 7 18 20 19 21 4 1 31 21 29 34 34 2 3 2 4 11 30 25 13 12 14 16 15 23 35 36 10 1 Grass b la.
6 – English WHA T IS WHA T? What is what on the c learing saw? (FC 2145, FC 2145 S, FC 2145 W) 24 27 25 26 23 6 3 5 13 11 12 9 7 17 8 14 16 15 21 22 18 1 4 20 18 19 28 29 30 2 3 4 10 31 9 8 7 32 1 S.
English – 7 GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PRO TECTION W ear hear ing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed ey e protection.
8 – English GENERAL SAFETY PRECA UTIONS Mac hine ′′ ′ ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly .
English – 9 GENERAL SAFETY PRECA UTIONS Cutting attachment guar d This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cr acked.
10 – English GENERAL SAFETY PRECA UTIONS F or muf fl ers it is very impor tant that you f ollow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and ser vicing the machine’ s saf ety equipment.
English – 11 GENERAL SAFETY PRECA UTIONS Cutting equipment Saw b lades are intended for cutting fi brous types of w ood. Grass b lades and grass cutters are intended f or cutting coarse grass .
12 – English GENERAL SAFETY PRECA UTIONS • The fi ling angle is 15 ° . File alternate teeth to the r ight and those in between to the left. If the blade has been hea vily pitted by stones it ma y be necessary to dress the top edges of the teeth with a fl at fi le, in e xceptional cases.
English – 13 ASSEMBL Y Assembling the handlebar and thr ottle (BC 2145) • Remov e the screw at the rear of the throttle handle . • Slide the throttle handle onto the right side of the handlebar , (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar .
14 – English ASSEMBL Y Assembling the cutting equipment Fitting the blade guar d/combination guar d, grass blade and ball-bearing- mounted suppor t cup • Hang the trimmer guard/combination guard (A) on the two hooks on the plate holder (M). Bend the guard around the shaft and tighten it with the bolt (L) on the opposite side of the shaft.
English – 15 ASSEMBL Y • T ur n the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing. • Inser t the locking pin (C) in the hole to loc k the shaft. • Place the blade (D) and support fl ange (F) on the output shaft.
16 – English ASSEMBL Y Adjusting the harness and c learing saw Standar d harness Safety release At the front is an easily accessible , quick release . Use this if the engine catches fi re or in any other emergency situation that requires you to free y ourself from the machine and harness.
English – 17 ASSEMBL Y 4 Adjust the height of the suspension hook as described in the instructions for the standard harness. (Forestry clearing) 5 If you need to lo wer the suspension hook, f or tr imming f or e xample, mov e the suspension strap (A) to the low er mounting point on the backplate .
18 – English FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate . 2 If you ha ve spilt fuel on y ourself or your clothes , change your clothes . W ash any part of your body that has come in contact with fuel.
English – 19 FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by fi lling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.
20 – English ST AR TING AND ST OPPING Chec k before starting • Check the b lade to ensure that no cracks ha ve f or med at the bottom of the teeth or by the centre hole .
English – 21 ST AR TING AND ST OPPING Start throttle: (FC 2145, FC 2145 S , FC 2145 W , BC 2145) Set the throttle to the star t position by moving the chok e control to the choke position and then returning it to its original position.
22 – English W ORKING TECHNIQ UES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine.
English – 23 W ORKING TECHNIQ UES W orking methods • Bef ore you star t clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollo ws etc. • Star t at whichev er end of the area is easiest, and clear an open space from which to work.
24 – English W ORKING TECHNIQ UES • Large stems must be cut from two sides . First determine which direction the stem will f all. Make the fi rst cut on the f elling side. Then fi nish cutting the stem from the other side. Adjust the cutting pressure to match the size of the stem and the hardness of the wood.
English – 25 W ORKING TECHNIQ UES Clearing • The clearing technique removes all unw anted vegetation. K eep the trimmer head just above the g round and tilt it. Let the end of the cord strike the ground around trees , posts, statues and the like .
26 – English MAINTENANCE Carb uretor Y our Jonsered product has been designed and manuf actured to speci fi cations that reduce harmful exhaust fumes.
English – 27 MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First tur n the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops.
28 – English MAINTENANCE Adjusting the start throttle speed (BC 2145) The correct star t throttle speed is set by means of an adjuster on the rear of the handle ne xt to the cable. Use this screw (5 mm Allen screw) to increase or decrease the start throttle speed.
English – 29 MAINTENANCE Air fi lter The air fi lter must be regularly cleaned to remov e dust and dir t in order to av oid: • Carburettor malfunctions • Star ting problems • Loss of engine power • Unnecessar y wear to engine par ts • Excessive fuel consumption.
30 – English MAINTENANCE Winter use Running problems can occur when using the machine in the cold and snowy conditions caused b y: • T oo low engine temperature.
English – 31 MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this manual.
32 – English TECHNICAL D A T A T echnical data Note 1: Equiv alent sound pressure lev el is calculated as the time-weighted energy total f or sound pressure lev els under v ar ious working conditions with the follo wing time distribution: 1/2 idling and 1/2 max speed.
English – 33 TECHNICAL D A T A BC 2145 Appro ved accessories T ype Cutting attachment guard, Ar t. no. Centre hole in blades/cutters , Ø 25,4 mm Output shaft thread M12 Grass b lade/grass cutter Mu.
34 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine.
1 Poly T rim 2 3 4 5 6 7 8 <20mm >20mm ! B A 6 Nm X 10.
1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII.
.
´®z+R*=¶5`¨ ´®z+R*=¶5`¨ 2,7-3,3 mm .106-.130" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3,0 mm - 7,5 m 3,3 mm .
"Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T ap n’Go 45.
´®z+R*=¶5`¨ 2005-09-29 ´®z+R*=¶5`¨ 1150102-95.
An important point after buying a device Jonsered FC2145W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jonsered FC2145W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jonsered FC2145W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jonsered FC2145W you will learn all the available features of the product, as well as information on its operation. The information that you get Jonsered FC2145W will certainly help you make a decision on the purchase.
If you already are a holder of Jonsered FC2145W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jonsered FC2145W.
However, one of the most important roles played by the user manual is to help in solving problems with Jonsered FC2145W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jonsered FC2145W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
