Instruction/ maintenance manual of the product FC 2255W Jonsered
Go to page of 40
FC2255 FC2255W BC2255 Oper ator’ s manual (EP A) Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine .
2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or f atal injur y to the operator or others. It is e xtremely impor tant that you read and understand the contents of the operator’ s manual.
English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . Maintenance, replacement, or repair of the emission control de vices and system may be perf ormed by any nonroad engine repair establishment or individual.
4 – English INTR ODUCTION Dear customer! Cong ratulations on y our choice to buy a Jonsered product! Y our purchase gives y ou access to prof essional help with repairs and ser vice whene ver this ma y be necessar y .
English – 5 WHA T IS WHA T? What is what on the c learing saw? (BC2255) 29 30 31 35 12 2 3 4 5 7 8 6 10 15 9 11 13 24 21 33 19 18 17 16 20 25 27 26 23 24 28 1 23 32 22 22 14 34 1 Locking n ut 2 Be v.
6 – English WHA T IS WHA T? What is what on the c learing saw? (FC2255, FC2255W) 24 28 26 27 25 29 21 23 22 1 20 30 16 2 3 4 6 11 12 10 14 13 15 1 7 8 5 9 19 17 18 1 Locking n ut 2 Be vel gear 3 Gre.
English – 7 GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A helmet should be w orn if the trees being cleared are taller than 2 m. HEARING PRO TECTION W ear hear ing protection that pro vides adequate noise reduction.
8 – English GENERAL SAFETY PRECA UTIONS Mac hine ′′ ′ ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose , and how checks and maintenance should be carried out to ensure that it operates correctly .
English – 9 GENERAL SAFETY PRECA UTIONS Cutting attac hment guard This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cr acked.
10 – English GENERAL SAFETY PRECA UTIONS F or mufflers it is very impor tant that you f ollow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and ser vicing the machine’ s safety equipment.
English – 11 GENERAL SAFETY PRECA UTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. • Obtain maximum cutting perf or mance . • Extend the lif e of cutting equipment.
12 – English GENERAL SAFETY PRECA UTIONS Sharpening the sa w blade • See the cutting attachment packaging f or correct shar pening instructions. A correctly shar pened b lade is essential for w or king efficiently and to av oid unnecessar y wear to the b lade and clearing saw .
English – 13 ASSEMBL Y Assembling the handlebar and thr ottle CA UTION! Some models have the throttle handle fitted at the f actor y . • Remov e the screw at the rear of the throttle handle . • Slide the throttle handle onto the right side of the handlebar , (see diagram).
14 – English ASSEMBL Y Fitting the b lade guard/combination guar d, grass blade and ball-bearing- mounted suppor t cup • Hang the trimmer guard/combination guard (A) on the two hooks on the plate holder (M). Bend the guard around the shaft and tighten it with the bolt (L) on the opposite side of the shaft.
English – 15 ASSEMBL Y • T ur n the blade shaft until one of the holes in the driv e disc aligns with the corresponding hole in the gear housing. • Inser t the locking pin (C) in the hole to loc k the shaft. • Place the blade (D) and support flange (F) on the output shaft.
16 – English ASSEMBL Y Adjusting the harness and c learing saw T riobalance harness Safety release Push down the red release le ver to release the machine from the harness. Adjusting the harness 1 Tighten the hip strap so that it sits securely . 2 Tighten the chest strap under y our left ar m so that it fits closely around your body .
English – 17 ASSEMBL Y Correct balance 1 Forestry clearing The machine is balanced by mo ving the suspension ring on the machine f orwards or backw ards. On some models the suspension ring is fixed, ho wev er, this will then ha ve a number of holes f or the suppor t hook.
18 – English FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilled fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate . 2 If you ha ve spilled fuel on y ourself or your clothes , change your clothes . W ash any par t of your body that has come in contact with fuel.
English – 19 FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.
20 – English ST AR TING AND ST OPPING Chec k before starting • Check the b lade to ensure that no cracks ha ve f or med at the bottom of the teeth or by the centre hole .
English – 21 ST AR TING AND ST OPPING W arm engine Use the same star ting procedure as f or a cold engine but without setting the choke control in the chok e position.
22 – English W ORKING TECHNIQ UES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine.
English – 23 W ORKING TECHNIQ UES W orking methods • Bef ore you star t clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollo ws etc. • Star t at whiche ver end of the area is easiest, and clear an open space from which to work.
24 – English W ORKING TECHNIQ UES • T o fell a tree f orwards, the bottom of the tree should be pulled backw ards. Pull the blade bac kwards with a quick, firm movement. • Large stems must be cut from two sides . First deter mine which direction the stem will f all.
English – 25 W ORKING TECHNIQ UES Grass trimming with a trimmer head T rimming • Hold the trimmer head just above the g round at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Nev er press the cord into the area to be cut.
26 – English MAINTENANCE Carb uretor Y our Jonsered product has been designed and manuf actured to specifications that reduce harmful exhaust fumes.
English – 27 MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First tur n the idle adjustment scre w T clockwise until the cutting attachment starts to rotate.
28 – English MAINTENANCE If the screen is frequently bloc ked, this can be a sign that the perf or mance of the catalytic conv er ter is impaired. Contact your dealer to inspect the m uffler . A block ed screen will cause the machine to ov erheat and result in damage to the cylinder and piston.
English – 29 MAINTENANCE Spark plug The spark plug condition is influenced by: • Incorrect carburetor adjustment. • An incorrect fuel mixture (too much or incorrect type of oil). • A dir ty air filter . These f actors cause deposits on the spar k plug electrodes , which ma y result in operating problems and starting difficulties.
30 – English MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine . Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and service work descr ibed in this manual.
English – 31 TECHNICAL D A T A T echnical data Note 1: Equivalent sound pressure le vel is calculated as the time-weighted energy total f or sound pressure le vels under v arious working conditions with the follo wing time distribution: 1/2 idling and 1/2 max speed.
32 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine.
1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII.
.
2,7-3,3 mm .106-.130" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3,0 mm - 7,5 m 3,3 mm - 6,0 m 4 8 Auto 55.
"Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T ap n’Go 45 Spin.
A 2,7 - 4,0 mm / .105 - .160" B 8 m / 26' C 15 cm / 5.9" 1 2 3 5 6 7 9 4 8 6" 15 cm B C A T ap n’Go 55 Spin "Clic".
´®z+RpG¶5^¨ ´®z+RpG¶5^¨.
.
´®z+RpG¶5^¨ 2007-05-11 ´®z+RpG¶5^¨ 1150803-95.
An important point after buying a device Jonsered FC 2255W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jonsered FC 2255W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jonsered FC 2255W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jonsered FC 2255W you will learn all the available features of the product, as well as information on its operation. The information that you get Jonsered FC 2255W will certainly help you make a decision on the purchase.
If you already are a holder of Jonsered FC 2255W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jonsered FC 2255W.
However, one of the most important roles played by the user manual is to help in solving problems with Jonsered FC 2255W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jonsered FC 2255W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
