Instruction/ maintenance manual of the product AS-CVTPROx00-1 Johnson Controls
Go to page of 6
Installation Instructions Issue Date April 9, 2003 © 2003 Johnson Controls, Inc. 1 Part No. 24-9544-0, Rev . C www.johnsoncontrols.com AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Application T.
2 AS-CVTPROx00-1 Zone Bus/N2 Bus Inte rface Converte r Installation Instructions Table 1: Cables Included with the CVTPRO Converter To Connect the CVTPRO Converter To: Use This Cable: PC via RS232 CVTPRO serial cable (18 inches/4 57 mm) Controller via the Zone Bus 8-pin RJ45 to 6-pin RJ11 phone cable (6 ft/1.
3 AS-CVTPROx00-1 Zone Bus/N2 Bus Inte rface Converte r Installation Instructions Connecting to the CVTPRO Converter Figure 5 illustrates the potential connections between a CVTPRO conver ter an d other devices. Refer to Table 1 and Table 2 for more information on cables and Palm devices.
4 AS-CVTPROx00- 1 Zone Bus/N2 Bus Interface Converter Installatio n Instruction s Connecting the CVTPRO Conv erter to a Controller with N2 Screw Terminals To connect the CVTPRO converter to a cont roller with screw terminals (Figure 6): 1.
AS-CVTPROx00- 1 Zone Bus/N2 Bus Interface Converter Installation Instruction s 5 Compatibility Table 4 lists compatible tool s, Operatin g Systems, and controllers used over the Zone Bus and N2 Bus with the CVTPRO converter.
6 AS-CVTPROx00-1 Zone Bus/N2 Bus Inte rface Converte r Installation Instructions Technical Specifications Product AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter AS-CVTPRO100-1 with 120V AC/3 VDC E.
An important point after buying a device Johnson Controls AS-CVTPROx00-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Johnson Controls AS-CVTPROx00-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Johnson Controls AS-CVTPROx00-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Johnson Controls AS-CVTPROx00-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Johnson Controls AS-CVTPROx00-1 will certainly help you make a decision on the purchase.
If you already are a holder of Johnson Controls AS-CVTPROx00-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Johnson Controls AS-CVTPROx00-1.
However, one of the most important roles played by the user manual is to help in solving problems with Johnson Controls AS-CVTPROx00-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Johnson Controls AS-CVTPROx00-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
