Instruction/ maintenance manual of the product JLTDH14 John Lewis
Go to page of 28
JLTDH14 Tumble dryer Instruction manual.
Important safety information It is most importa nt that this inst ruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner,.
cause an explosion. Only tumble dry items washed with water. • Risk of fire: items that have been spotted or soaked with vegeta ble or cooking oil constitute a fire hazard and should not be placed in the tu mble dryer. • If you have washed your la undry with stain remover you must execute an extra rinse cycle before loading your tumble dryer.
• Garments which have been in contact with volatile petroleum products should not be machine dried. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Warning! When a unit is no longer being used: • Pull the plug out of the socket. • Cut off the cable an d plug and dispose of them. • Dispose of the door catch.
Contents For the user Important safety information 2 Description of the appliance 7 Control panel 8 Before first use 8 Programme chart 9 Sorting and preparing laundry 10 Daily use 11 Switching machine.
Description of the appliance 1 4 6 8 11 12 2 3 5 7 9 10 1 Control panel 2 Water reservoir 3 Drum light 4 Fine fluff filter 5 Fluff filter 6 Loading door (reversible) 7 Rating plate 8 Course fluff filt.
Control panel 1 2 3 4 5 8 9 10 67 1 Programme selector and Off switch 2 Half power button 3 Intensive button 4 Anti-crease button 5 Alarm button 6 Cycle lights: Drying , End 7 Delay start lights : 3hr.
Programme chart Programmes max. load (weight when dry) Additional functions/ options Application/proper ties Intensive Half power Anti-crease Alarm Delay start Cottons Extra dry 7 kg • - • • • To dry thick or multi- layered fabrics, e. g. terry towelling items, bathrobes, cottons.
Programmes max. load (weight when dry) Additional functions/ options Application /properties Intensive Half pow er Anti-crease Alarm Delay start Wool care 1 kg - - • • • To refresh the cloth es made of wool . The cloths become soft and cosy. We r ecommend to remove the cloths immediately after the programme end.
Daily use Switching machi ne on Turn the programme selector to any programme. The machine switches on. When the loading door is open, the internal lamp illuminates the drum. Door opening and laundry loading 1. Open loading door: Push against the loading door (push point) 2.
2. Press the Intensiv e button - the LED above is on. To deselect the function press the Intensive button again. The LED a bove is off. Half power Half power for more gentle drying with reduced heat. To activate it: 1. Choose the drying programme. 2. Press the Half power button - the LED above is on.
Delay start With the Delay start button, you can delay the start of a programme by: 3, 6 or 9 hours. 1. Select the programme and additional functions. 2. Press the Delay start button. 3. To activate the delay timer, press the Start/Pause button. Starting the programme Press the Start/Pause button.
The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase.
4. Push down the unlock button on the large mesh filter. The large mesh filter pops up. 5. Take out fine filte r. 6. Remove the fluff from fine filte r.
If the fine filter is not fitted, the large mesh filter will not snap i nto place and the loading door cannot be closed. Cleaning the door seal Wipe the door seal with a da mp cloth immediately after the drying cycle has finis hed. Emptying the water reservoir Empty the water reservoir after every drying cycle.
Cleaning heat exchanger filters If the warning lamp Conden ser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 3 drying cycles. Both f ilters are located in the appliance base. Water can collect in the filter housing therefore it is normal for th e heat exchanger fluff filters to be come wet.
4. Use a damp hand to remove the fluff from the filter i n the base . If necessary pull out and clean the filter with warm water using a wiper or brush . Clean the inside of the door, the fluff filter chamber and the rubber seals of fluff. Insert the flu ff filter to the base .
Clean operating screen and housing Caution! Do not use furniture cleaners or aggressive cl eaning agents to clean the ma chine. Use a damp cloth to wipe down the operating screen and housing. What to do if ... Problem 1) Possible cause Remedy Dryer does not work.
Drying cycle to long 5) Fluff filters clogged. Clean fluff filters. To high loading volume. Respect max. loading volume. Laundry insufficiently spun. Spun adequately the laundry. Particularly high room temperature - no machine fault. Lower the room temper ature if possible.
Adjusting the level of conductivity Water contains, a variable quantity of limestone and mineral salts of which quantities vary accor ding to geographical locations thus varying its conductivity values.
Technical information height x width x depth 85 x 60 x 58 cm drum volume 108 l depth with the load door opened 109 cm adjustable height 1.5 cm the appliance weight 52 kg maximum lo ad volume 7 kg volt.
Appliance positioning • It is recommended that, for your convenience, the machine is position ed close to your washing ma chine. • The tumble dryer must be installed in a clean place, where dirt does not build up. • Air must be able to circulate freely all round the appliance.
3. Remove foil hose a nd polystyrene padding from the machine. Warning! If the appliance was not transported in an upright position, leave it to stand for 12 hours before connecting it to the electricity supply and using it for the first time, so that the oil can flo w back to the compressor.
If you fit your own plug, th e colours of the wires in the main s lead of your appliance may not correspond with the marking s identifying the terminals in your plug.
4. Use an appropriate to ol and exert pressure to unfasten locking block C from the snap-on fixture, take out and re-insert on the other side having rotated the block thr ough 180°. 5. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite side and screw down.
Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working".
John Lewis Partners hip 171 Victoria Street London SW1E 5NN www.johnlewis.com 136916250-B-102011.
An important point after buying a device John Lewis JLTDH14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLTDH14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLTDH14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLTDH14 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLTDH14 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLTDH14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLTDH14.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLTDH14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLTDH14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
