Instruction/ maintenance manual of the product JLTDC12 John Lewis
Go to page of 32
JLTDC12 Condenser dryer with heat pump Instruction manual.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, o.
cause an explosion. Only tumble dry items washed with water. • Risk of fire: items that have been spotted or soaked with ve getable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer. • If you have wa shed your laundry wi th stain remo ver you must execute an extra rinse cycle before loading your tumble dryer.
fluids are used, care should be taken to ensure that the fluid is remove d from the garment before placing in the machine. • Never pull the power supply cable to remove the plug from the socket; a lways take hold of the plug itself.
Warning! When a unit is no longer being used: • Pull the plug out of the socket. • Cut off the cable and plug and dispose of them. • Dispose of the door catch.
Contents For the user Important safety information 2 Description of the appliance 8 Control panel 9 Before first use 9 Programme chart 10 Sorting and preparing laundry 11 Daily use 12 Switching machin.
Machine settings 22 Environmental information 7.
Description of the appliance 1 4 6 8 11 12 2 3 5 7 9 10 1 Control panel 2 Water reservoir 3 Drum light 4 Fine fluff filter 5 Fluff filter 6 Loading door (reversible) 7 Rating plate 8 Course fluff filt.
Control panel 1 234 5 6 7 8 9 1 0 1 Programme selector and Off switch 2 Extra delicate button 3 Intensive button 4 Anti-crease button 5 Alarm button 6 Time button 7 Display ( Dry time ) 8 Start/Pause .
Programme chart Programmes max. load (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay sta rt Cottons Extra dry 7 kg - • • • - • To dry thick or multi- layered fa brics, e.
Programmes max. lo ad (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay start Wool care 1 kg - - - • - • To refresh the clothes made of wool . The cloths become soft and cosy.
Daily use Switching machine o n Turn the p rogramme selector to a ny programme. The ma chine switches on. When the loading doo r is open, the internal lamp illuminates the drum. Door opening and laundry loading 1. Open loading door: Push against the loading door (push point) 2.
To deselect the function press the Extra delicate button again. LED above is off. Intensive If the laundry is still damp after a standard drying programme, you can increase the drying result by using the Intensive function. 1. Choose the drying programme.
1. Turn the programme selector to the Time programme. The flashing 10' above the Time button is on. 2. Press the Time button repeatedly until the desired progr amme duration is shown in the display, e.g. 20 for a program me of 20 m inut es. If the progra mme duration is not selected, the duration is automatically set to 10 mins.
Starting the programme Press the Start/Pause button. T he programme starts. The programme progress is shown by elapsing Dry time on LCD. Changing programme To change a progr amme which has been selected by mistake once the programme has started, first turn the pro gramme selector to Off and then reset the programme.
The drying cycles are automaticall y followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of cre ases. The lau ndry can be removed at any time during the anti-crease phase.
4. Push down the unlock butto n on the large mesh filter. The larg e mesh filt er pops up. 5. Take out fine filter. 6. Remove the fluff from fine filter.
If the fine filter is not fitted, the large mesh filter will no t snap into place and the loading door cannot be closed. Cleaning the door seal Wipe the door seal with a damp cloth immediately after the drying cycle has finished. Emptying the water reservoir Empty the water reservoir after eve ry drying cycle.
Cleaning heat exchanger filters If the warning lamp Condenser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 3 drying cycles. Both filters are located in the appliance base. Water can collect in the filter housing therefore it is normal for the heat exchanger fluff filters to become wet.
4. Use a damp hand to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the inside of the door, the f luff filter chamber and the rubber seals of fluff. Insert the fluff filter to the base.
Clean operating screen and housing Caution! Do not use fur nitur e cleaners or aggressive cl eaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if ... Problem 1) Possible cause Remedy Dryer does not work.
Drying cycl e to short Small laundry volume./Too dry laun dry for selected programme. Select time programme or higher drying level (e.g. Extra dry ). Drying cycl e to long 5) Fluff filters clogged. Clean fl uff filters. To high loading volume. Respect max.
2. Press simultaneously th e Intensive and Anti-crease buttons and hold down for approx. 5 seconds. Adjusting the level of conductivity Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations thus varying its conductivity values.
Technical specifications Height x width x depth 85 x 60 x 58 cm Drum volume 108 l Depth with loading door open 109 cm Height can be adjusted by 1.5 cm Weight when empty approx.
Installation Transporting the appliance Important! Only tip the appliance on its left side to transport (see illustration), if it cannot be transported in an upright positi on. Appliance positioning • It is recommended that, for your convenience, the machine is positioned close to your washing machine .
Important! • The appliance shoul d not be installed in an environment such as a unheated g arage or outbuilding. Th e combination of high humidity and low ambient temperatures could affect the performance or the applianc e and theref ore inval idate y our guarantee.
Warning! THIS APPLIANCE MUST BE EARTHED. Should the applian ce power supply cable nee d to be replaced, this must be carried out by a Service Force agent (see cha pter: Repa irs - after sales service). The manufacturer dec lines any liabilit y should th is safe ty measure not be observed.
Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Centre. Warning! The power supply cable must be accessib le after installing the machine.
IMPORTANT : If you call out an engineer to a faul t listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appl iance is under guarantee. Spare parts Always insist on genuine spare parts. An authorised service enginee r should service this product, and only genuine spare parts should be used.
30.
31.
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 136912010-00-052010.
An important point after buying a device John Lewis JLTDC12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLTDC12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLTDC12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLTDC12 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLTDC12 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLTDC12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLTDC12.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLTDC12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLTDC12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
