Instruction/ maintenance manual of the product JLTDC11 John Lewis
Go to page of 32
JLTDC11 Condenser dryer with heat pump Instruction manual.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, o.
• If you have washed your laundry with stain remover you must execute an extra rinse cycle before loa ding your tumble dryer. • Please make sure tha t no gas lighters or matches have a ccidentally.
• Fabric softene rs, or similar products should be used as specified by the fabric softene r instructions. • Caution - hot surface : Do not touch the door light cover surface when the light is switched on.
product is disposed of corre ctly, you will help prevent potential negative consequen ces for the environment and h uman health, which could otherwise be caused by inappropriate waste handling of this product.
Contents For the user Important safety information 2 Description of the appliance 7 Control panel 8 Before first use 8 Programme chart 9 Sorting and preparing laundry 1 0 Daily use 11 Switching machin.
Description of the appliance 1 4 6 8 11 12 2 3 5 7 9 10 1 Control panel 2 Water reservoir 3 Drum light 4 Fine fluff filter 5 Fluff filter 6 Loading door (re versible) 7 Rating plate 8 Course fluff fil.
Control panel 1 234 5 6 7 8 9 1 0 1 Programme selector and Off switch 2 Extra delicate button 3 Intensive button 4 Anti-crease button 5 Alarm button 6 Time button 7 Display ( Dry time ) 8 Start/Pause .
Programme chart Programmes max. load (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay sta rt Cottons Extra dry 7 kg - • • • - • Thorough drying of t hick or multi- layered fabrics, e.
Programmes max. lo ad (weight when dry) Additional functions/options Application/properties Extra delicate Intensive Anti-crease Alarm Time Delay start Wool care 1 kg - - - • - • For briefly treating woollens with warm air, after they have been dried naturally, wo rn or stored for long periods.
Daily use Switching machine on Turn the programme selector to any programme. The machine switches on. When the loading door is open, the internal lamp illuminates the drum. Door opening and laundry loading 1. Open loading door: Push against the loading door (push point) 2.
To deselect the function press the Extra delicate button again. LED above is off. Intensive If the laundry i s still damp after a standard drying programme, you can increase the drying result by using the Inten sive function. 1. Choose the drying programme.
1. Turn the programme selector to the Time programme. The flashing 10' above the Time button is on. 2. Press the Time button repeatedly un til the desired progr amme duration is sho wn in the display, e.g. 20 for a programme of 20 minutes. If the programme duration is no t selected, the duration is automatica lly set to 10 mins.
Starting the programme Press the Start/Pause button. The programme starts. The programme progress is shown by elapsing Dry time on LCD. Changing programme To change a programme which has been selected by mistake once the programme has started, first turn the programme selecto r to Off and then reset the programme.
The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of cr eases. The laundr y can be removed at any time during the anti- crease phase.
4. Push down the unlock button on the large mesh filter. The large mesh filte r pops up. 5. Take out fin e filter. 6. Remove the f luff from fine filter.
If the fine filter is n ot fitted, the large mesh filter will not snap into place a nd the loading door cannot be closed. Cleaning the door seal Wipe the door s eal with a damp cloth immediately after the drying cycle has finished. Emptying the water reservoir Empty the water reservoir after every drying cycle.
Cleaning heat exchanger filters If the warning lamp Con denser lights, the heat exchanger fluff filters in the base of the appliance must be cleaned, i.e. after each 5 drying cycles. Both filters are located in the appliance base. Water can collect in the f ilter housing therefore it is normal for the heat exchanger fluff filte rs to become wet.
4. Use a damp han d to remove the fluff from the filter in the base . If necessary pull out and clean the filter with warm water using a wiper or brush. Clean the i nside of the door, the fluff fil ter chamber and the rubber seals of fluff. Insert the fluff filter to the base.
Clean operating screen and housing Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the mach ine. Use a damp cloth to wipe down the operating screen and h ousing. What to do if ... Problem 1) Possible cause Remedy Dryer does not work.
Drying cycle to short Small laundry volume./Too dry laundry for selected programme. Select time programme or higher drying level (e.g. Extra dry). Drying cycle to long 5) Fluff filters clogged. Clean fluff filters. To high loading volume. Respect max.
Adjusting the level of conductivity Water contains, a variable quantity of limestone and mineral sa lts of wh ich quantities vary according to geographical locations thus varying its conductivity values.
Technical specifications This appliance conforms with the following EU Directives: – 2006/95/EC dated 12.12.2006 Low Vo ltage Directive – 89/336/EEC dated 03.05.1989 EMC Dir ective inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.
Installation Transporting the appliance Important! Only tip the appliance on its left side to transport (see illu stration), if it cannot be transported in an upright position. Appliance positioning • It is recommended that, for your convenience, the machine is positioned close to your washing machine.
Important! • The appliance should not be installed in an environment such as a unhe ated garage or outbuilding. The combination of h igh humidity and low ambien t temperatures could affect the performance or the appliance and therefore invalidate your guarantee.
Warning! THIS APPLIANCE MUST BE EARTHED. Should the appliance power supply cable n eed to be replaced, this must be carri ed out by a Service Force agent (see chapter: Repairs - after sales service). The manufacturer declines any liability should this safety measure not be observed.
Warning! The manufacturer declines any responsibility for damage or injury throu gh failure to comply with the above safet y precautions . Should the applian ce power supply cable need to be replace d, this must be carried out by ou r Service Centre. Warning! The power supply cable must be accessible after installing the machin e.
even if the appliance is un der guarantee. Spare parts Always insist o n genuine spare parts. An authorised service engin eer should service this product, and only genuine spare parts should be used. Unde r no circumstances should you attempt to repair the appliance yourself.
29.
30.
31.
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 136909381-00-102009.
An important point after buying a device John Lewis JLTDC11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLTDC11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLTDC11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLTDC11 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLTDC11 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLTDC11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLTDC11.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLTDC11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLTDC11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
