Instruction/ maintenance manual of the product SR1750 HE John Deere
Go to page of 28
Manual Stair Robot SR1750 HE AATA INTERNATIONAL B.V. Manual Stair Robot SR1750 HE.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Stairrobot Type number : SR 1750 HE Serial number : Year of construction : 2001 Owner : Manufacturer : AATA International b.v Willem 2 straat 1e 6021 EA Budel The Netherlands Tel : 0031-(0) 495 518214 Fax : 0031-(0) 495 518515 e-mail: aata@aata.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Preface AATA International is an innovative and dynamic al company, specialised in stair climbing equipment.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Table of contents Preface………………………………………… …………………………… …………………… 3 Table of contents .
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Survey of standard We declare that the construction of the stairrobot SR1750HE is according to the provisions of EC-Directives 89/392/EWG.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 1. Technical data SR 1750 HE Description Value Units Speed 3 Metres p/minute Lifting capacity max. 1000 Kg. Maximum angle Max. 45 º Degrees Weight 175 Kg. Weight including standard accessories 232 Kg.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2 Description main components stairrobot SR 1750 HE 2.1. Drive • Single phase low-noise AC motor with thermal cut-out 2.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2. 4. Controls • Remote control (2 metres cable attached) manually operated 4-button switch Press a button to drive 2.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 2. 6. Descent adjuster • The descent adjuster is located at the rear end of the machine and is used to adjust the descent of the lifting platform depending on the weight of the load.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 3.2. Turntable • The turntable is a circular piece of equipment Ø 610 mm, h. 40 mm. constructed out-of two disks of block board with hard-plastic surface to eliminate friction.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 3.4. Dolly • The dolly is constructed of square steel fittings with four heavy-duty swivel wheels for easy movements. An extendable frame can be pulled out to increase stability while driving the StairRobot on the dolly.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 4. Safety 4.1. General safety precaution • • • • • It is not permitted to make alterations to the machine. Everybody who is working with the machine has to be acquainted with the safety rules and has to act upon them.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • • • • • • • • • • • To avoid misuse by unauthorised perso ns, don’t leave the machine unattended. Within the path of the machine there may be no obstructions.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5 OPERATORS PROCEDURE 5.1. Pre-use inspection To ensure proper working and safe operation of the SR 1750 HE StairRobot: • C.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.2. Loading 5.2.1 The correct position of the load • If the load is not placed in the correct position on the lifting platform, the Stair robot can get instable during the process of climbing or descending a staircase.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • The centre of gravity of the load should be within the positive area between the tracks. 5.2.2. Loading procedure • Start the procedure by securing the area for loading. Move the dolly with the stair robot into the desired position for loading.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.3. Ascending Load level • Ideal load level is obtained by adjusting the platform to the gradient of the stairs or dolly • The objective is to maintain a horizontal level of the platform during operation.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • The stair robot can be stopped at any stage by just releasing the buttons • When arriving on top of the stairway; stop the stairrobot on the stairs an d place the dolly in position at the top of the stairs in front of the stairrobot .
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 5.5. Unloading • Start the procedure by securing the area for unloading. Move the dolly with the stair robot into the desired position for unloading.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 6 Trouble shooting chart The stairrobot SR 1750 HE is designed and built to function for several years with little maintenance. In case a problem occurs please make the following checks.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. Symptom Possible course Solution • Oil leaks from hydraulic ram • Ram packing worn • Plunger bent • Replace o-ring an.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 7 Track replacement • Loosen both bolts a1 and a2 • Turn bolts b1 and b2 counter clockwise until the axle is at point d • Remove track at point C • To install the new track, reverse the above procedure Drawing (1.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. • Proper track tolerance at point F is +/- 10 mm (pulled by hand) drawing (3.) • Make sure that the distances A1 ….A4 are equal on both sides of the Stairrobot (drawing 4) Drawing (3.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 8 Electrical system Page 24 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 9 Hydraulic system Page 25 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 10. Parts Page 26 of 28.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 10.1. Parts list Art.nr.: Article 175.001A Main motor 175.001B Gearbox 175.002 Hydro-motor 175.003 Hydro-pump 175.003B Oil-seal hydro pump 175.007 4-button swit ch unit 175.008 Magneto swit ch 175.
Manual Stair Robot SR1750 HE Publication: 29-07-04 AATA INTERNATIONAL B.V. 11. CD-Rom video Content: • Stair robot general promotion video (mpeg1) • Instruction video SR 1750 HE (mpeg1) • Instru.
An important point after buying a device John Deere SR1750 HE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Deere SR1750 HE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Deere SR1750 HE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Deere SR1750 HE you will learn all the available features of the product, as well as information on its operation. The information that you get John Deere SR1750 HE will certainly help you make a decision on the purchase.
If you already are a holder of John Deere SR1750 HE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Deere SR1750 HE.
However, one of the most important roles played by the user manual is to help in solving problems with John Deere SR1750 HE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Deere SR1750 HE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center