Instruction/ maintenance manual of the product Phase 7 D30 JLA
Go to page of 39
D-30 Parts Manual 031102JCARRITA/rmoles ADC Part No. 450589 JLA Limited Meadowcroft Lane, Halifax Road Ripponden West Yorkshire, England HX6 4AJ Telephone: 01422 822282 / Fax: 01422 824390.
Retain This Manual In A Safe Place For Future Reference J.L.A. products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment.
Table of Contents OPL Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................. 2 OPL Control Door Assembly For Models Mfd. prior to July 1, 2002 .......
2 OPL Contr ol Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883574 1 White OPL Control Door (includes illus.
3 Illus. No. Part No. Qty . Description 1 883294 1 White Control Door Assembly (includes illus. nos. 1 and 3) 2 150314 4 #10-32 x 1/2” TORX + BTN 3 1 17604 2 Noise Suppressor T ape (sold by the foot) 4 --------* 1 Logo 5 15401 1 4 #10-32 Multi-Thread U-Nut * Contact reseller for logo.
4 Phase 7 OPL Micr opr ocessor Contr ol Panel Assembly Illus. No. Part No. Qty . Description 1 1 12571 1 Phase 7 OPL Keyboard 2 850984 1 Phase 7 Microprocessor Controller (computer) Panel ONL Y 883301 1 Phase 7 OPL Reversing Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus.
5 Illus. No. Part No. Qty . Description 1 122681 1 10-Pin Connector 2 122676 1 8-Pin Connector 3 122646 1 2-Pin Connector 4 122683 1 6-Pin T erminal 5 122640 1 9-Pin T erminal 6 122706 * #20-16 U.M.N.L. Socket 7 122669 * Female Crimp T erminal * As needed.
6 Fr ont Panel Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883567 1 White Front Panel Assembly (includes illus.
7 Fr ont Panel Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883137 1 White Front Panel Assembly (includes illus.
8 Main Door “S teel” Assembly Illus. No. Part No. Qty . Description 1 8 8 1 1 5 0 1 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 2 102354 1 Door Gasket 170731 1 Black Gasket Adhesive (10.3 oz. cartridge) 3 8 8 1 1 5 2 1 Black T op Hinge Block Assembly (includes illus.
9 Main Door Switch Assembly Illus. No. Part No. Qty . Description 1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 S tar W asher 4 137005 1 Door Switch 5 122636 2 Flag T erminal 6 88121 1 1 Black Main Door Switch Housing ONL Y 8 8 1 1 5 3 1 Black Main Door Switch Housing Complete (includes illus.
10 Basket (T umbler)/Support Assemblies Illus. No. Part No. Qty . Description 1* 800776 1 S tainless Steel Basket (tumbler) ONL Y (without felt collar) 883295 1 S tainless Steel Basket (tumbler)/Support Assemblies Complete (includes illus.
11 Dr op Lint Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 802277 1 Drop Lint Door (for OPL models) (includes illus.
12 Lint T rap Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 800401 1 Lint T rap Assembly Complete (includes illus.
13 Lint Drawer/Lint Drawer Switch Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883140 1 White Lint Drawer Assembly (includes illus.
14 Illus. No. Part No. Qty . Description 1 100107 1 5L-670 V -Belt (basket [tumbler] to idler) 2 1 0 1 1 2 9 1 9” x 2-1/2” Compound Pulley 3 100103 1 4L-510 V -Belt 4 154301 2 5/16-18 x 1” Allen Setscrew 5 100705 1 3/16” x 3/16” x 1-3/8” Key 6 882576 1 Idler Bearing Assembly Complete (includes illus.
15 Basket (T umbler) Bearing Assembly Illus. No. Part No. Qty . Description 1 153002 3 5/16” Lock W asher 2 880213 1 1-1/4” Flange Bearing with Nylock Setscrew 3 153002 3 5/16” Lock W asher 4 15.
16 Motor Mount Assembly.
17 Illus. No. Part No. Qty . Description 1 100103 1 4L-510 V -Belt (motor to idler) 2 100705 1 3/16” x 3/16” x 1-3/8” Key 3 1 0 1 1 3 1 1 1/2” x 2-1/4” Motor Pulley (for models mfd. as of August 22, 2002) 1 0 1 13 3 1 5/8” x 2-1/4” Motor Pulley (for models mfd.
18 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002.
19 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 880251 1 1/4” T emperature Sensor Probe Assembly (includes illus.
20 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002.
21 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 882533 1 1/4” T emperature Sensor Probe Assembly (includes illus.
22 Dir ect Spark Ignition (DSI) Burner Assembly.
23 Dir ect Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty . Description 1 817088 1 Direct Spark Ignition (DSI) Burner Box ONL Y 816998** 1 N a tural Gas Burner Assembly (includes illus. nos. 1 through 8 and 10 through 31) 817208** 1 Liquid Propane (L.
24 Hot Surface Ignition (HSI) Gas Burner Assembly.
25 Illus. No. Part No. Qty . Description 1 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 128920 1 Hot Surface Ignitor (HSI) 24V 2-1/2” Long 3 128921 1 Hot Surface Ignition (HSI) Flame Senso.
26 Electric Oven Assembly.
27 Electric Oven Assembly Illus. No. Part No. Qty . Description 1 803003* 1 Small Electric Oven Box ONL Y ---------* 1 Electric Oven Assembly Complete 2 ---------* - Electric Element 3 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 4 802800 1 Sail Switch Box with Bracket and Cover ONL Y 802801 1 Sail Switch Box Assembly Complete (includes illus.
28 Rear Electric Relay Panel Assembly.
29 Illus. No. Part No. Qty . Description 1 151000 2 #6-32 Pal Nut 2 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4 120716 1 2-Position T e.
30 Illus. No. Part No. Qty . Description 1 822752 1 S.A.F .E. T emperature Probe Assembly (includes illus. nos. 1 through 5) 2 154007 2 Push On Fastener 3 390390 1 Sensor Bracket (Only) 4 150301 2 #8-18 Phillips Pan Head TEK Screw 5 122647 1 Connector ONL Y S.
31 S.A.F .E. Solenoid and Piping Assembly Illus. No. Part No. Qty . Description 1 1651 14 1 S.A.F .E. Solenoid V alve 24V 50/60 Hz 2 143220 1 3/8” F .P .T . Brass T ee 3 143251 1 3/8” M.P .T . Brass Plug 4 143208 2 3/8” Comp x 3/8” M.P .T . Brass Connector 5 143099* 6' 3/8” OD x 0.
32 S team Coil/Air -Operated S team Damper Assembly.
33 Illus. No. Part No. Qty . Description 1 165013 1 S team Coil Assembly 2 153002 6 5/16” Lock W asher 3 152004 6 5/16-18 Hex Nut 4 152002 4 1/4-20 Hex Nut 5 153007 4 1/4” Lock W asher 6 820321 2 S team Damper Hinge Assembly 7 880835 1 S team Damper Assembly (includes illus.
34 Illus. No. Part No. Qty . Description 1 322809 1 Back Electrical Box Cover 2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 3* 314424 1 Gas T op Back Guard 322075 1 Electric T op Back Guard 4.
35 Electrical Oven Component Application Chart * When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controls .
36 Additional Parts A vailable Part No. Description 1 14006 “ W ARNING - Fire Hazards” Label 1 12280 “Clean Lint Screen” Label 1 14001 “CAUTION - Exhaust/Lint Screen” Label 1 14521 “Phas.
ADC 450589 1 - 03/29/02-15 2 * 10/16/02-15.
An important point after buying a device JLA Phase 7 D30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JLA Phase 7 D30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JLA Phase 7 D30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JLA Phase 7 D30 you will learn all the available features of the product, as well as information on its operation. The information that you get JLA Phase 7 D30 will certainly help you make a decision on the purchase.
If you already are a holder of JLA Phase 7 D30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JLA Phase 7 D30.
However, one of the most important roles played by the user manual is to help in solving problems with JLA Phase 7 D30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JLA Phase 7 D30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
