Instruction/ maintenance manual of the product DV1628 Jensen Tools
Go to page of 18
1 1 DV1628 Owner's Manual Thank you! Thank you for choosing a JENSEN product. W e ve tried to make the instructions in this owner s manual clear and easy to follow. If you take a few minutes to look through it, you ll learn how to use all of the features of your new JENSEN AM/FM/CD/DVD player for maximum enjoyment.
2 2 14 13 12 11 10 Front L Speaker Front R Speaker Power Antenna Ground Rear R Speaker Rear L Speaker Center Speaker Front L Speaker Front R Speaker 12 V Plus Memory 12 V+ Right Rear speaker Rear L Sp.
3 3 Troubleshooting: PROBLEM CAUSE CORRECTIVE ACTION Does not operate, display does not light. No power to Yellow wire, No power to Red Check power connection with Multi-meter. Check fuse for continuity with Multi-meter. Inline fuse blown Replace fuse.
4 4 AS/PS CLK DSP SMART MOODE SEL PWR/ILL 3 27 10 BAND/MENU 11 15 29 12 26 6 D.UP 5 D.DN 24 23 20 22 21 25 9 ENT MUTE OPEN 1 DOLBY 6 7 13 2 1 4 RND 3 RPT 2 SCN SOURCE 4 5 LED 28 AUDIO Operation: 1. Front Panel / Remote Control • Controls 1. Power Button: Press the Power button to turn the unit on.
5 5 1 15 2 4 5 6 7 9 10 12 13 16 14 17 18 11 29 8 19 CLK SCN RND D.DN D.UP AS/PS DSP RPT toggle between EQ settings, each press will toggle from Flat, Classic, Pop, Rock, to off. 14. Angle: Allows the viewer to view the DVD at different angles if the DVD is recorded with this feature.
6 6 • Front Panel removal: a. Press the open button #3. b. Press the middle release button and pull the panel straight out. • Radio Removal a. Grab the grooves of the front frame with fingers and pull. b. Insert the supplied levers inside the grooves on the right and left hand side of the radio.
7 7 Initial Setup: Press the Setup #18 button to enter the Setup mode. Press the Down #7 key to highlight the desired Setup screen. Press the Enter button to select the desired Setup screen. General Setup: General Setup Cont.: TV Display: Selects the appropriate TV aspect ratio, 4:3 or 16:9 • Normal / PS o Pan and Scan for 4:3 aspect ratio.
8 8 PIC Mode: • Auto o PIC mode automatically selects the setting depending on the DVD. • Film o Suitable for film or progressive source. • Video o Select Video for best image resolution. • Smart o When the TV output is progressive, additional vertical processing is applied.
9 9 OSD Language Setup: Selects the Language that the OSD will be displayed in. Closed Captioning: Turns the Closed Captioning on and off. Speaker Setup: GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP SETUP MENU - - MAIN PAGE Down Mix: • LT/RT o Activates Dolby Surround compatible output.
10 10 Speaker selection: Highlight the desired speaker selection then the ON / OFF Selection to turn the desired speaker ON or OFF. Individual speaker selection is active only in Downmix mode. Select Rear Delay and / or CNTR Delay to control the delay of the audio signal to the Rear and Center speakers.
11 11 Test Tone: By selecting TEST TONE, the unit will send a tone to each of the speakers in the following order: AUDIO SETUP: SPDIF - Turns the SPDIF optical output Off and On OP Mode — Only one operating mode for the Dolby Digital decoder.
12 12 Dual Mono: The dual mono reproduction is for the Dolby Digital program with 1+1 Audio code mode. • Stereo — Reproduces 1+1 program CH1 for left channel, CH2 for right channel • CH1 Mono — Reproduces CH1 in both left and right output. • CH2 Mono — Reproduces CH2 in both left and right output.
13 13 Language Setup screens: Audio — Selects the language to be heard through the audio output. Disc Menu — Selects the language to be displayed for the Disc Menu.
14 14 LANGUAGE SUBTITLE RESET DISC MENU LOCALE PARENTAL PASSWORD DEFAULTS MAIN PAGE -- PREFERENCES PAGE -- SMART NAV Parental Controls: Allows the parents to set a certain rating of movie that may be viewed. Highlight the Max rating desired for viewing and press enter.
15 15 Default Table: TV DISPLAY TV TYPE CAPTION DOWNMIX SPDIF OP MODE DUAL MONO DRC LPCM OUTPUT AUDIO SUBTITLE DISC MENU LOCALE PARENTAL PASSWORD SMART NAV WITH MENU 3308 NO-PARENTAL USA ENGLISH ENGLI.
16 16 GENERAL SPECIFICA TIONS: Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensiions(mm) : 178(W) x 160(D) x 50(H) Tone Controls - Bass (at 100 HZ) : +14dB/-14dB - Treble (at 10 KHZ) : +14dB/-14dB - SUPER BASS : 3 level Maximum Output Power With Power amplifier : 5x40W LINE Output Level(DVD) : 4V rms ±0.
17 17 WARRANTY 90 DAY / 12 MONTH LIMITED WARRANTY A UDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part t.
18 18 www.asaelectronics.com 88-V1621-13.
An important point after buying a device Jensen Tools DV1628 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen Tools DV1628 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen Tools DV1628 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen Tools DV1628 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen Tools DV1628 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen Tools DV1628, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen Tools DV1628.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen Tools DV1628. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen Tools DV1628 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
