Instruction/ maintenance manual of the product SRP2002 Jensen
Go to page of 14
Thank You! Thank you for choosing a JENSEN product. We hope you find the instructions in this owner ’s manual clear and easy to follow . If you ta ke a few minutes to l ook through it, you’ll learn how to use all the features of your new JENSEN / Sirius satellite radio for maximum enjoyment.
SRP2002 2 Fe at u r e s The compact, portable design of the SRP2002 Plug-N-Play makes it easy to use, and its convenient carryi ng case allows for quick tra nsfer between multiple vehicles. The SRP2002 consists of two main components: a Down Link Processor (DLP) and a Display Control Unit (DCU).
SRP2002 3 Location and Mounting (continued) Display Control Unit The DCU comes with a cr adle designed to be mounted on the dash , allowing eas y access for opera ting the unit. The cradle can be mounted with two screws or with a strip of velcro, both of which are incl uded in the Plug-N-Play cas e.
SRP2002 4 Connecting Audio Connection Options The SRP2002 offers several options for connecting the radio to a car audio system: a 3.5 mm.-RCA audio cable, an RCA-RCA audio cable, and a Cassett e Adaptor . Note: Use only one met hod at a time for connecti ng audio to t he DLP .
SRP2002 5 Mounting the Antenna The antenna allows the radio to receive both ter restrial and satellite signals. Before using the radio, ma ke sure the antenna connector is plugged into the DLP and the antenna is properly mou nted on the outside of the car .
SRP2002 6 Operation Power On Press the POWER button to turn the unit on. The unit will run a diagnostic check. The Sirius logo appears temporarily , and the display will read "ACQUIRING SIGNAL" while it tunes to a channel.
SRP2002 7 Configuration Setting (continued) Modes of Operation Direct Mode Direct mode allows a user to c hoose individual c hannels by pressing the tuning button up or down. Channel s can also be accessed directly by pressing Select then entering the channel number .
SRP2002 8 Configuration Setting (continued) Change S Code The user security code, referred to as th e S code, is a four-digit code used to set, access and clear parental locks on selected stations. The default value is set to “0000” and may be changed at any time.
SRP2002 9 Direct Mode (continu ed) Scrolling Data If an Artist or Song title is too long to be displayed on the LCD, the scrolling function can be enabled to sc roll the text across the display . T o enable scrolling, press Func , and the text will scroll across the display two times.
SRP2002 10 Categor y Mode Manual Tuning Press the tuning button to select a channel within a categor y . Note: When tuning chann els within a category, the tuning button will only tune in chann els within that particular category.
SRP2002 11 Parental Loc k Out The parental lock out feature allows a user to lock out selected stations so they may only be accessed by using the S code. Setting Channel Lock Out T o set channel lock out, complete the following steps: 1. Access the des ired channel.
SRP2002 12 Skip/R estore Channel Skip / Delete a Channel 1. Use direct access to select the channel you want to skip/delete. 2. Press the Func and Select butto ns simultaneously for more than two seconds. The selected channel has now been deleted. Restore a Deleted Channel 1.
SRP2002 13 T r oubleshooting * Note: Man-made objects (m etal truss-type bridges, tall bu ildings, tunnels, etc.) and n atural objects (mountains, canyons, valle ys, etc.) can ca use a loss of satellite and terrestrial signals momentarily. If the signal is lost, the DLP will try and reacquire the satellite an d/or terrestrial signal(s).
SRP2002 14 Specifications Power supply10.8-15.6 Vdc, negative ground Audio Out (DLP)400 mVRMS @ 10K ohms Fuses2 (2 amp) fast blow DCU Dimensions4.5" x 3.5" x 1" (1 14mm x 89mm x 25mm) DLP Dimensions6.5" x 4.25" x 1" (165mm x 108mm x 25mm) S pecifications subject to change without notice.
An important point after buying a device Jensen SRP2002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen SRP2002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen SRP2002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen SRP2002 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen SRP2002 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen SRP2002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen SRP2002.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen SRP2002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen SRP2002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
