Instruction/ maintenance manual of the product DSC 280 JBL Professional
Go to page of 4
Product Technical Notes DSC 280 Programming MIDI Sysex and PCMCIA Card File Transfers There are two ways to update and transfer programs into and out of the DSC 280. These are by MIDI System Exclusive and by PCMCIA (PC) card. The procedures for each of these actions are detailed below.
Transfers Via MIDI Sysex using an external computer: 1. Connect the MIDI OUT of the computer to the MIDI IN of the Receiving DSC. 2. Make sure the MIDI channel is the same on both the computer and Receiving Unit. 3. In the “Utility” menu of the receiving unit, select Lock Mode to “OFF” using the Up and Down Arrow keys.
Storing a Complete Set of Programs to PC Card With the power disconnected, take out the eight Posi-drive screws on the top of the DSC 1. Plug the PC Card into the slot located in the front left of the unit located behind the meter panel. The Slot is keyed so the card can only be seated in one direction.
Troubleshooting Q. When I try to confirm a file transfer, some of the buttons do not work. A. Lock mode is On. Go to the Utility screen and turn Lock Mode off. Q. I cannot write to the PC Card, I get a message saying write protected. A. PC cards have a write protect tab on them.
An important point after buying a device JBL Professional DSC 280 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL Professional DSC 280 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL Professional DSC 280 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL Professional DSC 280 you will learn all the available features of the product, as well as information on its operation. The information that you get JBL Professional DSC 280 will certainly help you make a decision on the purchase.
If you already are a holder of JBL Professional DSC 280, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL Professional DSC 280.
However, one of the most important roles played by the user manual is to help in solving problems with JBL Professional DSC 280. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL Professional DSC 280 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
