Instruction/ maintenance manual of the product BASSQ JBL Professional
Go to page of 12
JBL ® PERFORMANCE ™ SERIES OWNER’S GUIDE JBL BASS Q ™ AUT OMA TIC ROOM-MODE- CORRECTION PROCESSOR ® JBLP2338 BassQ 5/8/08 4:54 PM Page 1.
3 Important Safety Instructions 4 Introduction and Features 4 Included Accessories 5 Operation and Controls 8 Connecting Y our JBL Performance Series System 9 Installing the JBL BassQ Processor 10 Cal.
3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
4 INTRODUCTION AND FEA TURES INTRODUCTION Congratulations on your purchase of this Performance ™ Series JBL BassQ ™ processor! Y ou have purchased a product that embodies the best of what JBL ® engineers have learned about the emo tional power of audio reproduction in more than fifty years of preeminence in the field.
5 1. Power Switch Pushing this button is all that is required to turn on the unit if it is not part of a JBL Performance Series system and the Main Power Switch A is in the On position.
6 11. Main Power Switch Place this switch in the On position at all times during normal use. 12. Power T rigger Input Jack When using the JBL BassQ processor in a JBL Performance Series system with the A V1 digital surround processor , you will need to use the trigger cable set included with the A V1.
7 REMOTE CONTROL BA TTERY INST ALLA TION The remote control requires one CR2032 battery . The battery should be replaced as needed. When battery power is low , the remote control enters a low-voltage con- dition, preventing it from operating the JBL BassQ unit.
8 GENERAL INFORMA TION A JBL Performance Series system installation incorporates one preamp/ processor (A V1 or AV2), one power amplifier (A VA7) – in addition to the amplifier(s) used to power one or more subwoofers – and one JBL BassQ processor .
9 PHYSICAL INST ALLA TION Installation of the JBL BassQ unit is a straightforward process. IMPORT ANT : The JBL BassQ unit must be installed following the directions below . Always put amplifiers on the bottom of a stack. Heavy equipment should not be supported solely by the front- mounting locations.
10 Once you have connected the sub- woofer input into the JBL BassQ unit and connected the outputs from the unit to all subwoofers in the system, you will need to run the BassQ test to finalize the room calibration and correction. Before Y ou Begin It is very important that all subwoofers are on and installed before you run the BassQ process.
Problem: The JBL BassQ unit does not turn on. Neither the red nor blue indicator lights are on. Make sure the JBL BassQ processor is plugged in, and verify that there is the proper voltage at the wall outlet. Make sure the Main Power Switch A on the rear panel is in the On position.
Features, specifications and appearance are subject to change without notice. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Performance, JBL BassQ and Pro Sound Comes Home are trademarks of Harman International Industries, Incorporated.
An important point after buying a device JBL Professional BASSQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JBL Professional BASSQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JBL Professional BASSQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JBL Professional BASSQ you will learn all the available features of the product, as well as information on its operation. The information that you get JBL Professional BASSQ will certainly help you make a decision on the purchase.
If you already are a holder of JBL Professional BASSQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JBL Professional BASSQ.
However, one of the most important roles played by the user manual is to help in solving problems with JBL Professional BASSQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JBL Professional BASSQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
