Instruction/ maintenance manual of the product W7220 Jade Range
Go to page of 12
INSTALLATION INSTRUCTIONS 62-0331-07 J ADE™ Economiz er Module (MODEL W7220) This document describes wir ing, power up , basic troubleshooting, and common installation issues for the JADE™ Economiz er Module (Model W7220). For fur ther information on mounting and operation, refer to Honeyw ell document 63-2700.
JADE™ ECONO MIZER MODULE 62-0331—0 7 2 INSTALLATION AND SETUP The Economizer module may be mounted in any orientation. Howe ver , mounting in the or ientation shown above permits proper viewing of the LCD displa y and use of the ke ypad. NO TE: Jade will be in the "set up" mode f or the first 60 minutes after powered.
JADE™ ECONOMIZER MODULE 3 62-0331—07 Fig. 1. Stand-a lone dr y bulb Economizer configuration with blac k motor M7215. ROOF T OP UNIT Y1O Y2O Y1I Y2I OCC 24 V AC 1K1 1K1 E-GND Y1 G W2 W1 Y2 O/B OCC.
JADE™ ECONO MIZER MODULE 62-0331—0 7 4 Fig. 2. Stand-al one dry-bulb Economizer configurat ion with Hone ywell MS7403 Direct Coupled Actuator . Fig. 3. Stand-alone dry-bulb Economiz er configuration with Honeywell MS3103J or MS3105J communicating ac tuators.
JADE™ ECONOMIZER MODULE 5 62-0331—07 Fig. 4. Econo mizer with Sylk Bu s sensors for enthalp y configuratio n with H oneywell M7215 black motor . S-BUS S-BUS OUTSIDE AIR TEMP/HUMIDITY (ENTHALPY) SY.
JADE™ ECONO MIZER MODULE 62-0331—0 7 6 Fig. 5. Economizer with Sylk Bus sensors for enthalp y configuration with a Honeywell MS7505 or MS7503 Direct Coupled Actuator .
JADE™ ECONOMIZER MODULE 7 62-0331—07 Fig. 6. Economizer with Sylk bus sen sor for enthalp y configur ation with Hon eyw ell MS31 03 or MS3105 communicating actuators.
JADE™ ECONO MIZER MODULE 62-0331—0 7 8 Fig. 8. Single Enthal py curves and boundari es. Po w e r U p After the modul e is mounted and wired, apply power . Po w e r U p D e l a y Upon power up (or after a power outage or brownout), the W7220 controller module begi ns a 5 minute po wer up dela y bef ore enabling mechanical cooli ng.
JADE™ ECONOMIZER MODULE 9 62-0331—07 Clearing Alarms Once the alar m has been identified and the cause has bee n remov ed (e.g. replaced faulty sensor), the alarm can be cleared from the display . T o clear an alar m, perf orm the f ollowing: 1. Navigate to the desired alar m.
JADE™ ECONO MIZER MODULE 62-0331—0 7 10 COMMON INSTALLATION ISSUES AND CONCERNS T able 3. Instal lation Issu es and Conce rns. Area Issue or Concern Pos sible Cause and Remedy Configuration Are th.
JADE™ ECONOMIZER MODULE 11 62-0331—07 Operation or Use My outdoor temperature reading on the ST A TUS menu is not accurate. Check the sensor wiring. Enthalpy sensors are to be wired to the Sylk Bus terminals. T emperature sensors are to be wire d to the OA T and MA T terminals.
JADE™ ECONO MIZER MODULE Automation and Co ntrol Solutions Honeywell Internationa l Inc. 1985 Douglas Drive North Golden Valley, MN 55422 customer.honeywell.com ® U .S. Re gistered T rademark © 2012 Hone ywell International Inc. 62-0331—07 M.S. R ev .
An important point after buying a device Jade Range W7220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jade Range W7220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jade Range W7220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jade Range W7220 you will learn all the available features of the product, as well as information on its operation. The information that you get Jade Range W7220 will certainly help you make a decision on the purchase.
If you already are a holder of Jade Range W7220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jade Range W7220.
However, one of the most important roles played by the user manual is to help in solving problems with Jade Range W7220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jade Range W7220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
