Instruction/ maintenance manual of the product 200 IRIS
Go to page of 20
200 Range Dialer Installation Manual Version 1.0.
The information contained is supplied without liability for any errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission. The copyright and foregoing restriction on reproduction and use extend to all media in which the information may be embedded.
.
Iris Touch 200 Range Dialer Installation Manual i Contents 1. Introduction ...................................................................................................... 1 1.1. About this manual… .............................................
Iris Touch 200 Range Dialer Installation Manual ii.
Iris Touch 200 Range Dialer Installation Manual 1 1. Introduction 1.1. About this manual… This manual is designed to help you, the Installer, with the installation process for the IRIS Touch alarm dialer. We recommend that you read through this manual, in its entirety, before you visit the customer’s site and begin the installation.
Iris Touch 200 Range Dialer Installation Manual 2 1.3. System specifications Feature Touch 200 GSM Touch 220 Ethernet Touch 240 Ethernet & GPRS Stylish, tamper proof enclosure Easy to i.
Iris Touch 200 Range Dialer Installation Manual 3 2. Before you start… 2.1. Package contents In this package you should have the following components: • Main dialer unit comprising: • PCB with 3 part plastic enclosure (back, front and slider). • 4 x assembly screws.
Iris Touch 200 Range Dialer Installation Manual 4 3. Alarm dialer interface IRIS dialers carry alarm signals from the alarm panel over IP completely transparently so when they arrive at the Monitoring Centre it is as though they had come over a traditional PSTN connection.
Iris Touch 200 Range Dialer Installation Manual 5 1. Decide where to run the cables Decide the best way to run the cables to the PCB. This can be either: • Behind the unit (through the wall). • Through the bottom of the back plate of the unit (via the ‘knock outs’).
Iris Touch 200 Range Dialer Installation Manual 6 7. Fit the PCB to the back plate Fit the PCB to the back plate, aligning the corners of the plate with the edgings on the back plate and the two bottom screw fittings [13] . Screw in the 2 top screws only [14] .
Iris Touch 200 Range Dialer Installation Manual 7 5. Configuring the IRIS Touch Dialer The majority of configurations can be carried out via the touch screen interface display on the IRIS dialer.
Iris Touch 200 Range Dialer Installation Manual 8 6. Post installation Once you have completed the installation you must: • Ensure the system is running correctly, the LED light on top of the unit is on steady and alarms are being signaled to the Monitoring Centre correctly.
Iris Touch 200 Range Dialer Installation Manual 9 Reference g round Pin inputs 14 4K7 Resistor 15K Resistor 14 Reference g round Pin inputs 7.1. Installation Each PIN input is designed to be connected.
Iris Touch 200 Range Dialer Installation Manual 10 7.2. Default alarm messages The default SIA messages for each PIN are shown below: Pin ‘Set’ message ‘Restore’ message Meaning 1 NBA01 NBR01 Burglary alarm/restore 2 NFA02 NFR02 Fire alarm/restore 3 NQA03 NQR03 Emergency alarm/restore 4 NOP04 NCL04 Open/close 8.
Iris Touch 200 Range Dialer Installation Manual 11 Appendix A – Settings menu Setting Purpose Network Interfaces Selects which network interfaces are going to be used (i.e. Ethernet and/or Ethernet/GPRS). Stops dialer reporting trouble on interfaces not being used.
Iris Touch 200 Range Dialer Installation Manual 12 Appendix B – Installation photos [1] [2] [3] [5] [4] [6].
Iris Touch 200 Range Dialer Installation Manual 13 [9] [7] [8] [13] [14] [17] [16] [18] [11] [10] [12] [15] [20] [19].
Iris Touch 200 Range Dialer Installation Manual 14 Appendix C – Specification Alarm Dialer Interface Two wire interface via RJ11 socket 40V feed at 12mA Ringing voltage 40V P-P to REN4 for incoming .
Iris Touch 200 Range Dialer Installation Manual 15 Conformance The IRIS range of alarm dialers comply with the following European Directives: • 1999/5/EC (Radio & Telecoms Terminal Equipment Directive). • 72/23/EEC (Low Voltage Directive). • 89/336/EEC (Electromagnetic Compatibility Directive as amended by 92/31/EEC).
An important point after buying a device IRIS 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IRIS 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IRIS 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IRIS 200 you will learn all the available features of the product, as well as information on its operation. The information that you get IRIS 200 will certainly help you make a decision on the purchase.
If you already are a holder of IRIS 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IRIS 200.
However, one of the most important roles played by the user manual is to help in solving problems with IRIS 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IRIS 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
