Instruction/ maintenance manual of the product PCM-9452 Intel
Go to page of 64
Compact Board PCM-9452 PCM-9452 Intel ® Core TM 2 Duo/ Core TM Duo/ Celeron ® M (Yonah) Processors Two DDR 400/533/667 DDR II SODIMM 18-bit Dual-Channel LVDS TFT LCD 6 USB 2.
Compact Board PCM-9452 i Copyright Notice This document is copyrighted, 2008. All rights are reserved. The original manufacturer reserves the right to make im provements to the products described in this manual at an y time without notice.
Compact Board PCM-9452 i i Acknowledgments All other products’ name or tradema rks a re properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association.
Compact Board PCM-9452 iii Packing List Before you begin installing your card, please make sure that the following materials have been shipp ed: • 1 9657666600 Jumper Cap • 1 1759294520 CPU Cooler.
Compact Board PCM-9452 i v Contents Chapter 1 General Information 1.1 Introduct ion ................................................................ 1-2 1.2 Featur es .................................................................... 1-3 1.3 Specific ations .
Compact Board PCM-9452 v 2.17 SATA 2 Connec tor (CN2 ) ........................................ 2-13 2.18 System Fan Conne ctor (CN3 ) ................................. 2-13 2.19 LVDS Connect or (CN4 ) ........................................... 2-13 2.
Compact Board PCM-9452 v i 2.41 IDE Connecto r (CN27) .......................................... 2-22 2.42 Keyboard/Mouse Con nector (CN2 8) ..................... 2-23 2.43 CPU Fan Connec tor (CN29) ................................. 2-24 2.44 IrDA Connector (CN30) .
Compact Board PCM-9452 Chapter 1 General Information 1- 1 General Chapter 1 Information.
Compact Board PCM-9452 Chapter 1 General Information 1- 2 1.1 Introduction The PCM-9452 supports Intel ® Core TM 2 Duo (Merom)/ Core TM Duo/ Celeron ® M processors offering a wide range of pe rfo rmance, price and power. Memory support for up to 4 GB of DDRII 400/53 3/667 is available through two 200-pin SODIM M sockets.
Compact Board PCM-9452 Chapter 1 General Informatio n 1- 3 1.2 Features Intel ® Core TM 2 Duo/ Core TM Duo/ Celeron ® M (Yonah) Processors 18-bit Dual-Channel LVDS TFT LCD, TV-out Two DD.
Compact Board PCM-9452 Chapter 1 General Information 1- 4 1.3 Specifications System CPU Supports Intel ® Core TM 2 Duo/ Core TM Duo/ Cele ron ® M (Y onah) proces sors System Memory 200-pin SODIMM x 2, max.
Compact Board PCM-9452 Chapter 1 General Informatio n 1- 5 (Typical) +12V @ 2.96A, +5V @ 3.72 A Operating Temperature 32 o F~140 o F (0 o C~60 o C) Storage Temperatu re -40 o F~17 6 o F (-40 o C~80 o C) Board Size 8”(L) x5.75” (W) (203mm x 146mm) Gross Weight 1.
Compact Board PCM-9452 Chapter 1 General Information 1- 6 IrDA One IrDA Tx/Rx header Serial Port RS-232 x 3, RS-232/422/485 x 1 PS/2 Port Keyboard +Mouse x 1 Audio MIC-in/ Line-in/ Line-out,/ CD-in Stereo Amplifier included USB USB 2.
Compact Board PCM-9452 C h a p t e r 2 Q u i c k I n s t a l l a t i o n G u i d e 2-1 Quick Inst allation Chapter 2 Guide Notice: The Quick Installatio n Guide is derive d f rom Chapter 2 of the user manual . Fo r other ch apters and further inst allation instructio ns, please refer to the use r manual CD-ROM that came with th e p roduct.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-2 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic com ponents.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-3 2.2 Location of Connectors and Jump ers.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-4.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-5 2.3 Mechanical Drawing 11.00.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-6 10.00 8.60 0.00 0.00 5.08 5.08 33.66 138.03 178.19 119.51 125.32 72.52 175.91 129.02 67.02 166.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-7 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-8 2.5 List of Connectors The board has a numbe r of connectors that allow yo u to configure your system to suit your appli c ation.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-9 CN19 COM Port 2 Connector CN20 COM Port 3 Connector CN21 PCI Slot CN22 Digital I/O Connector CN23 USB Port 5,6 Connector CN24 USB Port 3,4.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-10 2.6 Setting Jumpers You configure your card to match the need s of your application by setting jumpers. A jumper is the sim plest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-11 2.7 LVDS Operating Voltage Selection (JP1) JP1 Function 1-2 +5V 2-3 +3.3V (default) 2.8 ATX Power Supply Auto Turn-on Selection (J P3) JP3 Function Open Standar d AT X Oper ating (def ault) 1-2 Auto Turn-on (AT Power Supply Behavior) 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-12 2.12 Front Panel (JP7) JP7 Function ( - ) 1-2 ( + ) AT X P o w e r -on Button (-) 3-4 (+) HDD Active LED (-) 5-6 (+) External S p eak er (-) 7-8 (+) Power LED / or CASEOPEN# ( Optional ) (-) 9-10 (+) System Reset Button 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-13 2.16 TV-out Connector (CN1) Pin Signal P i n Signal 1 Y 2 CVBS 3 Ground 4 Ground 5 C 6 N/C 7 Ground 8 N/C 2.17 SATA 2 Connector (CN2) Pin Signal 1 Ground 2 TX2+ 3 TX2- 4 Ground 5 RX2- 6 RX2+ 7 Ground 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-14 5 TXLCLK# 6 TXLCLK 7 LCD V olt. 8 Ground 9 TXL0# 10 TXL0 1 1 TXL1# 12 T XL1 13 TXL2# 14 TXL2 15 N/C 16 N/C 17 L VDS_DA T A 18 L VDS_CLK 19 TXU0# 20 TXU0 21 TXU1# 22 TXU1 23 TXU2# 24 TXU2 25 N/C 26 N/C 27 LCD V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-15 17 Ground 18 -5 V olt. 19 +5 V olt. 20 +5 V olt. 2.21 RJ-45 Ethernet# 1 Co nnector (CN6) Pin Signal Pin S i g n a l 1 MDI1_0+ / TXD+ 2 MDI1_0- / TXD- 3 MDI1_1+ / RXD+ 4 MDI1_2+ 5 MDI1_2- 6 MDI1_1- / RXD- 7 MDI1_3+ 8 MDI1_3- 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-16 2.24 Pin Header Ethernet#2 Connecto r (CN9) (Optional) Pin Signal Pin S i g n a l 1 MDI2_0+ 2 MDI2_0- 3 MDI2_1+ 4 MDI2_1- 5 Ground 6 Ground 7 MDI2_2+ 8 MDI2_2- 9 MDI2_3+ 10 MDI2_3- 2.25 SATA 0 Connector (CN10) Pin S i g n a l 1 Ground 2 TX0+ 3 TX0- 4 Ground 5 RX0- 6 RX0+ 7 Ground 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-17 13 Ground 14 Ground 2.27 COM Port 4 Connector (CN12) Pin Signal Pin S i g n a l 1 DCDD 2 RXD 3 TXD 4 DTRD 5 Ground 6 DSRD 7 RT SD 8 CTSD 9 RID 10 N/C 2.28 CRT Display Connector (CN13) Pin Signal Pin S i g n a l 1 R 2 +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-18 4 Ground 5 Backlight Enable 2.30 Stereo Audio Output Connec tor (CN15) Pin Signal Pin S i g n a l 1 OUT A+ 2 OUT A- 3 OUTB+ 4 OUTB- 2.31 Ethernet#1 LED Indicator (CN1 6) Pin Signal Pin S i g n a l 1 +3.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-19 9 RIA 10 N/C 2.34 COM Port 2 Connector (CN19) COM2 RS-232 Mode Pin Signal Pin S i g n a l 1 DCDB 2 RXB 3 TXB 4 DTRB 5 Ground 6 DSRB 7 RTSB 8 CT SB 9 RIB / +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-20 2.35 COM Port 3 Connector (CN20) Pin Signal Pin S i g n a l 1 DCDC 2 RXC 3 TXC 4 DTRC 5 Ground 6 DSRC 7 RT SC 8 CTSC 9 RIC 10 N/C 2.36 Digital I/O Connector (CN22) Pin Signal Pin S i g n a l 1 Port 1 2 Port 2 3 Port 3 4 Port 4 5 Port 5 6 Port 6 7 Port 7 8 Port 8 9 +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-21 Port 2 CN22 Pin 2 Bit 1 U22 Pin 26 (GPIO 21) Port 1 CN22 Pin 1 Bit 0 U22 Pin 27 (GPIO 20) 2.37 USB Port 5,6 Connector (CN23) Pin Signal Pin S i g n a l 1 +5 V olt. 2 Ground 3 Data4 - 4 Ground 5 Data4 + 6 Data5 + 7 Ground 8 Data5 - 9 Ground 10 +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-22 9 PTD3 10 Ground 11 PTD4 12 Ground 13 PTD5 14 Ground 15 PTD6 16 Ground 17 PTD7 18 Ground 19 ACK# 20 Ground 21 BUSY 22 Ground 23 PE 24 Ground 25 SLCT 26 N/C 2.40 USB Port 1,2 Connector (CN26) Pin Signal Pin S i g n a l 1 +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-23 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 Ground 20 N/C / +5V for DOM optional 21 DREQ 22 Ground 23 IOW# 24 Ground 25 IOR# 26 Ground 27 IORDY 28 Ground 29 DACK# 30 Ground 31 IRQ14 32 N/C 33 A1 34 Cable Detect 35 A0 36 A2 37 CS#1 38 CS#3 39 ACT# 40 Ground 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-24 2.43 CPU FAN Connec tor (CN29) Pin S i g n a l 1 Ground 2 +5 V olt. / +12 V olt. (Optional) 3 F AN Sense 2.44 IrDA Connector (CN30) Pin S i g n a l 1 +5 V olt. 2 N/C 3 Rx 4 Ground 5 Tx 2.45 PCMCIA Slot (CN31) S tandard S pecification 2.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-25 3 SDD4 28 SDD12 4 SDD5 29 SDD13 5 SDD6 30 SDD14 6 SDD7 31 SDD15 7 SDCS#1 32 SDCS#3 8 Ground 33 Ground 9 Ground 34 SDIOR# 10 Ground 35 SDIOW# 1 1 Ground 36 +5 V olt. 12 Ground 37 IRQ15 13 +5 V olt.
Compact Board PCM-9452 Chapter 2 Quick Installation Guide 2-26 Below T able for China RoHS Requirements 产品中有毒有害物质 或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane.
Compact Board PCM-9452 Chapter 3 A ward BIOS Setup 3-1 Chapter Aw a r d 3 BIOS Setup.
Compact Board PCM-9452 Chapter 3 A ward BIOS Setup 3-2 3.1 System Test and Initialization These routines test and initialize board hard wa re. If the routines encounter an error duri ng the tests, you will either hear a few short beeps or see an erro r message on the screen.
Compact Board PCM-9452 Chapter 3 A ward BIOS Setup 3-3 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup prog ram that allows users to modify the basic system configuration. Thi s type of information is stored in battery -backed CMOS RAM so that it retains the Setup information when the power is turned off.
Compact Board PCM-9452 Chapter 3 A ward BIOS Setup 3-4 PnP/PCI Configurations This entry appears if your system supp orts PnP/PCI. PC Health Status Use this menu to set PC Health Status. Frequency/Voltage Control Use this menu to specify your settings for auto detect DIMM/PCI clock and spread sp ectrum.
Compact Board PCM-9452 Chapter 3 A ward BIOS Setup 3-5 1.Display Properties--->Setti ng---> Adva nce d --->Monitor ==>Monitor settings - > un che ck <Hide modes that this monitor cannot display> 2. "Display Properties --> setting --> advanced --> adapter --> List All Mode".
Compact Board PCM-9452 Chapter 4 Driver Installation 4-1 Chapter Driver 4 Inst allation.
Compact Board PCM-9452 Chapter 4 Driver Installation 4-2 The PCM-9452 comes with an AutoRun CD-ROM that contains all drivers and util ities that can help you to install the driver automatically. Insert the driver CD, the driv er CD-title will auto start and show the installation guide.
Compact Board PCM-9452 Chapter 4 Driver Installation 4-3 4.1 Installation: Insert the PCM-9452 CD-ROM into the CD-ROM driv e and install the drivers from Step 1 to Step 6 in order. Step 1 – Install INF Driver 1. Click on the S tep 1 –INF Update Utility v8.
Compact Board PCM-9452 Chapter 4 Driver Installation 4-4 5. The system will help you in stall the driver automatically Step 4 –Install Audio Driver 1. Click on the S t ep 4 –Realtek ALC 655 Audio Driver v3.71 folder 2. Choose the OS your system is.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 1 Programming the Appendix A W atchdog Timer.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 2 A.1 Programming PCM-9452 utilizes ITE 8712 chipset as its watchdog timer controller.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 3 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modi fy the data of configuration registers; (3) Exit the MB PnP Mode. Undesi red re sult may occur if the MB PnP Mode is not exited normally.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 4 Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 5 4 WDT output through PW ROK1/PWROK2 (pulse) enable 3 Select the inter rupt level note for WDT WatchDog Timer Time-out Value (.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 6 Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 7 MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Co.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 8 CMP AL,12h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV D.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 9 Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Compact Board PCM-9452 Appendix A P rogra mming the W atchdog T imer A - 10 Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02F h END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 .
Compact Board PCM-9452 A p p e n d i x B I / O I n f o r m a t i o n B - 1 I/O Information Appendix B.
Compact Board PCM-9452 Appendix B I/ O Informatio n B - 2 B.1 I/O Address Map Address Description User Address 000-01F DMA Controller #1 000-000F 020-03F Interrupt Controller #1, Master 020-021 040-05.
Compact Board PCM-9452 Appendix B I/ O Informatio n B - 3 B.3 IRQ Mapping Chart IRQ0 System Timer IRQ8 System CMOS / Real time clock IRQ1 Keyboard IRQ9 Microsoft ACPI – Compliant system IRQ2 Cascade.
Compact Board PCM-9452 Appendix C Mating Connector C - 1 Mating Connecotor x Appendi C.
Compact Board PCM-9452 Appendix C Mating Connector C - 2 C.1 List of Mating Connectors and Ca bles The table notes mating connectors and availabl e cables.
Compact Board PCM-9452 Appendix C Mating Connector C - 3 CN16 Ethernet #1 LAN LED N/A N/A CN17 Ethernet #2 LAN LED N/A N/A CN18 Serial Port 1 Connector Neltron 2026B-10 Serial Port Cable 1701 100207 C.
An important point after buying a device Intel PCM-9452 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel PCM-9452 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel PCM-9452 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel PCM-9452 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel PCM-9452 will certainly help you make a decision on the purchase.
If you already are a holder of Intel PCM-9452, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel PCM-9452.
However, one of the most important roles played by the user manual is to help in solving problems with Intel PCM-9452. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel PCM-9452 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center