Instruction/ maintenance manual of the product IP Gateway (Global Call) for Linux and Windows Intel
Go to page of 56
IP Gateway (Global Call) Demo Guide for Linux and Windows Copyright © 2002-2005 Intel Corporation 05-1662-005.
COPYRIGHT NOTICE INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
iii Table of Contents 1. About This Guide ............................................................................................ 1 1.1. Purpose .....................................................................................................
IP Gateway (Global Call) Demo Guide for Linux and Windows iv 6.5.1. Handling Keyboard Input Events ........................................................ 29 6.5.2. Handling SRL Events .................................................................
v List of Tables Table 2. Command Line Switches ...................................................................... 18 Table 3. Runtime Keyboard Commands ............................................................. 20 Table 4. Source Files Used by the IP Gateway (Global Call) Demo .
IP Gateway (Global Call) Demo Guide for Linux and Windows vi.
vii List of Figures Figure 1. Hardware Configuration with Onboard NIC and PSTN Front End ....... 7 Figure 2. Hardware Configuration with Onboard NIC and separate PSTN board ..............................................................................
IP Gateway (Global Call) Demo Guide for Linux and Windows viii.
1 1. About This Guide This section describes the purpose of this guide, the intended audience, and references to other documents that may be useful to the user. 1.1. Purpose This guide describes the operation of the IP Gateway (Global Call) demo. 1.2.
IP Gateway (Global Call) Demo Guide for Linux and Windows 2.
3 2. Demo Description 2.1. About the Demo The IP Gateway (Global Call) demo is a host-based application that demonstrates using the Global Call API to build a PSTN − IP gateway. The demo source code can be used as sample code for those who want to begin developing an application from a working application.
IP Gateway (Global Call) Demo Guide for Linux and Windows 4.
5 3. System Requirements This chapter discusses the system requirement for running the IP Gateway (Global Call) demo. It contains the following topics: • Hardware Requirements • Software Requirements 3.
IP Gateway (Global Call) Demo Guide for Linux and Windows 6.
7 4. Preparing to Run the Demo This chapter discusses how to prepare to run the IP Gateway (Global Call) demo. It provides information about the following topics: • Connecting to External Equipment • Editing Configuration Files 4.
IP Gateway (Global Call) Demo Guide for Linux and Windows 8 Intern et/ Intr anet li ne Intel NetStructure® IPT board CTbus cable PSTN line Intel NetStructure® DM/V-A series board Figure 2.
4. Preparing to Run the Demo 9 IP Netw ork H.323 Terminal IP Gateway Telephone PBX IP Gateway Telephone PBX Fax Fax Figure 3. Typical Topology 4.2. Editing Configuration Files This section discusses how to configure the demo for your system. It contains the following topics: • Configuration file location • Editing the gateway_r4.
IP Gateway (Global Call) Demo Guide for Linux and Windows 10 4.2.2. Editing the gateway_r4.cfg File Below is an example of the gateway_r4.cfg file. Update the following information: ipProtocol The IP .
4. Preparing to Run the Demo 11 • CoderFramesPerPkt - frames per packet for the selected coder • CoderVAD - Voice Activity Detection on/off AudioTxCodecs Capability for transmit audio codecs. See AudioRxCodecs for a complete description. DataCodecs Capability for fax codecs.
IP Gateway (Global Call) Demo Guide for Linux and Windows 12 UII User Input Indication string to send NonStdParm Non-standard parameter data to send NonStdCmd Non-standard command string to send ObjId Object ID Q931Facility Facility data to send on the Q.
4. Preparing to Run the Demo 13 The following is an example of a configuration file. ######################################################################################## # Telephony Protocol : # F.
IP Gateway (Global Call) Demo Guide for Linux and Windows 14 DTMFmode = OutOfBand AudioRxCodecs { CoderType = g711Mulaw CoderFramesPerPkt = 30 CoderVAD = 0 } AudioTxCodecs { CoderType = g711Mulaw Code.
4. Preparing to Run the Demo 15 # use 0.0.0.0 as the default address for descovering the GK regServerAddress = 10.242.214.45 NonStdRasCmd = NSC_Chan1 RasObjId = Intel # possible alias types: 1 = strin.
.
17 5. Running the Demo This chapter discusses how to run the IP Gateway (Global Call) demo. It contains the following topics: • Starting the Demo • Demo Options • Using the Demo • Stopping the Demo 5.
IP Gateway (Global Call) Demo Guide for Linux and Windows 18 Table 1. Command Line Switches Switch Action Default -c < filename > Configuration file name gateway_r4.cfg -d Sets Debug Level (0-4): 0-FATAL: used when one or more channels are deadlocked.
5. Running the Demo 19 Switch Action Default -l <n,…> Printouts will be printed into channel log files. If ‘all’ follows the –l, log files will be created for all available channels. If a list of channels in the following format: C1-C2, C3-C4, C5 (e.
IP Gateway (Global Call) Demo Guide for Linux and Windows 20 5.3. Using the Demo The demo always waits for input from the keyboard. While the demo is running, you can enter any of the following commands: Table 2.
21 6. Demo Details This chapter discusses the IP Gateway (Global Call) demo in more detail. It contains the following topics: • Files Used by the Demo • Handling an Incoming Call • Programming Model • Initializations • Event Handling • Demo State Machine 6.
IP Gateway (Global Call) Demo Guide for Linux and Windows 22 Filename Description OS gatepars.c The demo configuration file parsing functions Both gatepars.h Function prototype for gatepars.c Both gatepstn.c PSTN-specific functions Both gatepstn.h Function prototype for gatepstn.
6. Demo Details 23 Filename Description OS register.h Function prototype for register.c Both Release gateway_r4.cfg Demo configuration file Windows Release/ gateway_r4.cfg Demo configuration file Linux Release gateway_r4.exe Executable Windows Release/ gateway_r4.
IP Gateway (Global Call) Demo Guide for Linux and Windows 24 Filename Description OS Releaseutil.lib Compiled Utility library Windows 6.1.3. PDL Files In Windows the following files are located in $(I.
6. Demo Details 25 Filename Description OS /pdl_linux/pdl.c Platform dependency functions Linux /pdl_linux/pdl.h Function prototype for pdl.c Linux /pdl_linux/ pdl_linux_version.c PDL version information Linux 6.2. Handling an Incoming Call This section discusses how the demo application handles incoming calls.
IP Gateway (Global Call) Demo Guide for Linux and Windows 26 Once the destination gateway has answered the H.323 call, the IP Gateway (Global Call) demo connects the PSTN call to the IP call. An audio path is now established between the PSTN call and the destination IP station.
6. Demo Details 27 The threads are created as follows: • The first (main) thread is created by the demo application to get the keyboard input. • The second thread is an SRL thread, created as a result of the demo application calling sr_enblhdlr( ) in Windows.
IP Gateway (Global Call) Demo Guide for Linux and Windows 28 • Calculates the logical board and channel and saves them into Session.pstnParams • Closes the board, by calling dx_Close( ) or dt_Close( ) .
6. Demo Details 29 • Calls gc_OpenEx( ) which opens all IP devices, returns the IP LineDevH , and saves it in Session.ipParams • Saves the channel number in the global array HandleToChannel[ ] according to the LineDevH handle 13. The application main() function calls waitForKey( ) , to receive keyboard input.
IP Gateway (Global Call) Demo Guide for Linux and Windows 30 3. Otherwise, the application calls gc_GetUsrAttr( ) and then calls either ipGetEvent( ) to process the IP event, or pstnGetEvent( ) to process the PSTN event. 6.5.3. Handling Application Exit Events Normal application exit events don’t enter the SRL.
6. Demo Details 31 GATE_NULL IP_CONNEC TED GATE_DROP IP_OFFERED GATE_CONNECTED IP: GCEV _EXTENSION IP: gc_SetUserInfo( ) IP: gc_AnswerCall( ) IP: GCEV_ANSW ERED IP: gc_Listen( ) PSTN: gc_MakeCall( ) I.
IP Gateway (Global Call) Demo Guide for Linux and Windows 32 3. In IP_CONNECTED, when the application receives GCEV_CONNECTED from the PSTN side, the application calls pstnListen( ) , which in turn ca.
6. Demo Details 33 2. In PSTN_OFFERED the application waits for GCEV_CONNECTED from the IP side. When the application receives GCEV_CONNECTED it calls: • gc_Extension( ) to get the call information .
IP Gateway (Global Call) Demo Guide for Linux and Windows 34 2. When the application receives GCEV_DROPCALL from the IP side, it calls gc_Extension( ) to get the RTCP information. When the application receives GCEV_EXTENSION the application calls gc_ReleaseCall( ) and the state transitions to GATE_NULL.
35 Appendix A Log File of IP Call Establishment DATE: 08/16/01 TIME: 10:49:20 TRACE: File: gatepstn.c Line: 189 End of pstnOpenFrontEnd function on channel 14 DATE: 08/16/01 TIME: 10:49:21 TRACE: File: gateip.c Line: 99 Start ipOpenDevices function on channel 14 DATE: 08/16/01 TIME: 10:49:21 TRACE: File: gateip.
IP Gateway (Global Call) Demo Guide for Linux and Windows 36 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:00 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:00 TRACE: File: gateip.
Appendix A 37 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:01 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:01 TRACE: File: gatestate.
IP Gateway (Global Call) Demo Guide for Linux and Windows 38 TRACE: File: gatestate.c Line: 841 Drop call on channel 14 DATE: 08/16/01 TIME: 10:54:24 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:54:24 TRACE: File: gatepstn.
39 Appendix B Log File of PSTN Call Establishment DATE: 08/16/01 TIME: 10:57:55 TRACE: File: gatepstn.c Line: 189 End of pstnOpenFrontEnd function on channel 10 DATE: 08/16/01 TIME: 10:57:56 TRACE: File: gateip.c Line: 99 Start ipOpenDevices function on channel 10 DATE: 08/16/01 TIME: 10:57:56 TRACE: File: gateip.
IP Gateway (Global Call) Demo Guide for Linux and Windows 40 TRACE: File: gateip.c Line: 140 Start ipMakeCall function on channel 10 DATE: 08/16/01 TIME: 10:58:37 TRACE: File: gateip.c Line: 205 End of ipMakeCall function on channel 10 DATE: 08/16/01 TIME: 10:58:37 TRACE: File: gatepstn.
Appendix B 41 DATE: 08/16/01 TIME: 10:58:38 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 10 DATE: 08/16/01 TIME: 10:58:38 TRACE: File: gateip.c Line: 227 Start OnExtension function on channel 10 DATE: 08/16/01 TIME: 10:58:38 INFO: File: gateip.
IP Gateway (Global Call) Demo Guide for Linux and Windows 42 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatepstn.c Line: 348 End of pstnUnListen function on channel 10 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatestate.c Line: 841 Drop call on channel 10 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatepstn.
Appendix B 43 DATE: 08/16/01 TIME: 11:00:05 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 10.
IP Gateway (Global Call) Demo Guide for Linux and Windows 44.
45 Index A ag_Listen( ), 32, 33 ag_Unlisten( ), 33 APPMAIN.C, 29 ATDV_SUBDEVS( ), 27 C Call connection, 3 Call establishment, 25 Call progress tones, 26 Call state GATE_CONNECTED, 32, 33 GATE_DROP, 33.
IP Gateway (Global Call) Demo Guide for Linux and Windows 46 gc_DropCall( ), 33 gc_Extension( ), 31, 33 gc_GetNetworkH( ), 28 gc_GetVoiceH( ), 28 gc_GetXmitSlot(), 30 gc_Listen( ), 31, 33 gc_MakeCall(.
Index 47 N NetwH, 28 P PDL, 3 pdl.c, 24 PDLsr_enbhdlr( ), 27 PDLsr_getboardcnt( ), 27 Platform Dependency Library, 3 PSTN State Diagram, 32 PSTN channel, 3 PSTN, Log File, 39 PSTN_OFFERED, 32 pstnGetVOXChannels( ), 27 pstnOpenFrontEnd( ), 28 R remote phone number, 25 Routing, 25 S Session.
48.
An important point after buying a device Intel IP Gateway (Global Call) for Linux and Windows (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel IP Gateway (Global Call) for Linux and Windows yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel IP Gateway (Global Call) for Linux and Windows - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel IP Gateway (Global Call) for Linux and Windows you will learn all the available features of the product, as well as information on its operation. The information that you get Intel IP Gateway (Global Call) for Linux and Windows will certainly help you make a decision on the purchase.
If you already are a holder of Intel IP Gateway (Global Call) for Linux and Windows, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel IP Gateway (Global Call) for Linux and Windows.
However, one of the most important roles played by the user manual is to help in solving problems with Intel IP Gateway (Global Call) for Linux and Windows. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel IP Gateway (Global Call) for Linux and Windows along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
