Instruction/ maintenance manual of the product IB850 Intel
Go to page of 69
IB8 50 Socket 478 Pentium 4 Intel 875P Chipset Full Size CPU Card USER ’ S MANUAL Version 1.0.
ii IB850 User’s Manual Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. I ntel and Pentium 4 are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation.
IB850 User’s Manual iii Table of Contents Introduction .............................................................. 1 Checklist ........................................................................ 1 Product Description ........................
iv IB850 User’s Manual This page is intentionally left blank..
INTRODUCTION IB850 User’s Manual 1 Introduction Checklist Your IB850 Pentium 4 CPU card package should include the items listed below: • The IB850 CPU Card • This User’s Manual • 1 IDE Ribbo.
INSTALLATIONS 2 IB850 User’s Manual Product Description The IB850 Pentium 4 CPU card incorporates the Intel 875P chipset that can utilize a single PGA478 processor of up to 3.2GHz or higher and supports FSB frequency of 400/533/800Mhz (100Mhz, 133Mhz, an d 200Mhz HCLK respectively).
INTRODUCTION IB850 User’s Manual 3 Specifications Product Name IB850 Form Factor PICMG (full size CPU card) CPU Type Socket 478 (Intel Pentium 4) CPU Voltage 0.8375V~1.6V (VR D 10) System Speed 2.0 G~3.2G Hz CPU Frequency 400 MHz/533MHz/800MHz Green /APM APM1.
INSTALLATIONS 4 IB850 User’s Manual Connector System Voltages +5V, +12V, - 12V, 5VSB Board Size 122 x 338 mm Other Features Modem Wake up, LAN Wakeup.
INTRODUCTION IB850 User’s Manual 5 Board Dimensions 0.2" [5.08] 9.762" [247.95] 6.087" [154.61] 6.712" [170.48] 4.6" [116.84] 4.362" [110.79] 3.792" [96.32] 3.196" [81.18] 0.856" [21.74] 4.8" [121.92] 0" [0.
INSTALLATIONS 6 IB850 User’s Manual.
INSTALLATIONS IB850 User’s Manual 7 Installations This section provides information on how to use the jumpers and connectors on the IB850 in order to set up a workable system. The topics covered are: Installing the CPU ..............................
INSTALLATIONS 8 IB850 User’s Manual Installing the CPU The IB850 CPU card supports a Socket 478 processor socket for Intel Pentium 4 processors. The Socket 478 processor socket comes with a lever to secure the processor. Raise this lever to about a 90 ° angle to allow the insertion of the processor.
INSTALLATIONS IB850 User’s Manual 9 ATX Power Installation The system power is provided to the CPU card with the CN1 and J7 ATX power connectors. Please note that the J7 external ATX power connector should be connected to the backplane for IB850 to function.
INSTALLATIONS 10 IB850 User’s Manual Setting the Jum pers Jumpers are used on IB850 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs.
INSTALLATIONS IB850 User’s Manual 11 Jumper Locations on IB850 CN1 J1 DIMM1 J3 BZ1 DIMM2 JP8 J2 IDE1 FDD1 CN3 CN2 J8 J7 J9 AGP1 BAT1 IDE2 J6 J14 J4 J13 J11 J15 J5 J12 J19 RT2 JP7 J20 J21 Jumper Loca.
INSTALLATIONS 12 IB850 User’s Manual JP1: Clear CMOS Contents Use JP1 , a 3 - pin header, to clear the CMOS contents. Note that the ATX - power connector should be disconnected from the CPU card before clearing CMOS.
INSTALLATIONS IB850 User’s Manual 13 JP 7 : DiskOnChip Address Select JP 7 Address D0000 - D7FFF D8000 - D 9 FFF (default) JP 9 : AT/ATX Power Supply Select JP 9 Function ATX power supply AT power s.
INSTALLATIONS 14 IB850 User’s Manual Jumper and Connectors on IBA110 J1: TMDS Panel Connector TMDS stands Transition Minimized Differential Signaling.
INSTALLATIONS IB850 User’s Manual 15 J3 : Panel Inverter Power Connector The connector supports 1A current (m aximum). Pin # Signal Name 1 +12V 2 NC 3 Ground J4 : VGA Chipset Fan Power Connector Pin.
INSTALLATIONS 16 IB850 User’s Manual.
INSTALLATIONS IB850 User’s Manual 17 SW1: LVDS Resolution Select SW1 - 1 SW1 - 2 SW1 - 3 Resolution OFF ON ON 800x600 18 bit ON OFF ON 1024x768 18bit OFF OFF ON 1024x768 24 bit.
INSTALLATIONS 18 IB850 User’s Manual [ Connectors on IB850 The connectors on IB850 all ows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on IB850 and their respective functions.
INSTALLATIONS IB850 User’s Manual 19 Connector Locations on IB850 IDE1, IDE2: EIDE Connectors IDE2 JP15 RT3 DIMM1 DIMM2 J3 BZ1 CN1 J1 J16 JP14 BAT1 AGP1 J18 J17 JP13 JP12 J21 J20 J19 J12 CN3 CN2 J7 .
INSTALLATIONS 20 IB850 User’s Manual Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Hos t data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 H.
INSTALLATIONS IB850 User’s Manual 21 FDD1: Floppy Drive Connector FDD1 is a 34 - pin header and will support up to 2.88MB floppy drives. Signal Name Pin # Pin # Signal Name Ground 1 2 RM/LC Ground 3.
INSTALLATIONS 22 IB850 User’s Manual Signal Name Pin Pin Signal Name Vcc 1 5 Ground USB2 - 2 6 USB3+ USB2+ 3 7 USB3 - CN3 Ground 4 8 Vcc J3 : CPU Fan Power Connector J3 is a 3 - pin header for the CPU fan.
INSTALLATIONS IB850 User’s Manual 23 J1 : System Function Connector J 1 provides connectors for system indicators that provide light indication of the computer activities and switches to change the computer status. J 1 is a 20 - pin header that provid es interfaces for the following functions.
INSTALLATIONS 24 IB850 User’s Manual SMI/Hardware Switch: Pins 6 and 16 This connector supports the "Green Switch" on the control panel, which, when pressed, will force the system into the power - saving mode immediately.
INSTALLATIONS IB850 User’s Manual 25 J2 : Parallel Port Connector The following table describes the pin out assignments of this connector. Signal Name Pin # Pin # Signal Name Line printer strobe 1 1.
INSTALLATIONS 26 IB850 User’s Manual J10 : Wake On LAN Connector J 10 is a 3 - pin header for the Wake On LAN function on the motherboard. The following table shows the pin out assignments of this connector. Wake On LAN will function properly only with an ATX power supply with 5VSB that has 1A.
INSTALLATIONS IB850 User’s Manual 27 J15 : VGA CRT Connector Th e pin assignments of the J1 5 VGA CRT connector are as follows: Signal Name Pin Pin Signal Name Red 1 2 Green Blue 3 4 N.
INSTALLATIONS 28 IB850 User’s Manual J19 : PS/2 Keyboard and Mouse Connector J 19 uses a Y - cable with dual D - connectors for a PS/2 keyboard and a PS/2 mo use.
INSTALLATIONS IB850 User’s Manual 29 Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock - up, such as when software becomes trapped in a deadlock.
INSTALLATIONS 30 IB850 User’s Manual mov cl, 0F5h call Read_Reg and al, NOT 08h call Write_Reg ;set count mode as second pop ax mov cl, 0F6h call Write_Reg ;set watchdog timer mov al, 01h mov cl, 3 .
INSTALLATIONS IB850 User’s Manual 31 ; Name : Unlock_Chip ; IN : None ; OUT : None ;[]=============================================== Unlock_Chip Proc Near mov dx, 2Eh mov al, 87h out dx, al out dx,.
INSTALLATIONS 32 IB850 User’s Manual ; Name : Read_Reg ; IN : CL - register index ; OUT : AL - Value to read ;[]=================================================== Read_Reg Proc Near mov al , cl mov.
BIOS SETUP IB850 User’s Manual 33 BIOS Setup This chapter describes the different settings available in the Award BIOS that comes with the CPU card. The topics covered in this chapter are as follows: BIOS Introduction ...............................
BIOS SETUP 34 IB850 User’s Manual BIOS Introduction The Award BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel Pentium 4 processors. The BIOS provides critical low - level suppo rt for a standard device such as disk drives, serial ports and parallel ports.
BIOS SETUP IB850 User’s Manual 35 Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail - Safe Defaults Advanced Chipset Features L.
BIOS SETUP 36 IB850 User’s Manual Standard CMOS Setup “Standard CMOS Setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the CPU card is already installed in a working system, you will not need to select this option.
BIOS SETUP IB850 User’s Manual 37 Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/ - keys to set the current time.
BIOS SETUP 38 IB850 User’s Manual Video This field selects the type of video display card installed in your system. You can choose the following video display cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA mon itor adapters. (default) CGA 40 Power up in 40 column mode.
BIOS SETUP IB850 User’s Manual 39 Advanc ed BIOS Features This section allows you to configure and improve your system and allows you to set up some system features according to your preference.
BIOS SETUP 40 IB850 User’s Manual When enabled, this field speeds up the Power On Self Test (POST) after the system is turned on. If it is set to Enabled , BIOS will skip some items.
BIOS SETUP IB850 User’s Manual 41 First/Second/Third Boot Device These fields determine the drive that the system searches first for an operating system. The options available include Floppy , LS/ZIP , HDD - 0 , SCSI , CDROM , HDD - 1 , HDD - 2 , HDD - 3 , LAN and Disable .
BIOS SETUP 42 IB850 User’s Manual Security Option This field allows you to limit access to the System and Setup. The default value i s Setup . When you select System, the system prompts for the User Password every time you boot up.
BIOS SETUP IB850 User’s Manual 43 Advanced Chipset Features This Setup menu controls the configuration of the chipset. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features D RAM Timing S.
BIOS SETUP 44 IB850 User’s Manual This field sets the frequency of the DRAM memory installed. The default setting is Auto . The other settings are PC200 and PC266 . System BIOS Cacheable The setting of Enabled allows caching of the system BIOS ROM at F000h - FFFFFh, resulting in better system performance.
BIOS SETUP IB850 User’s Manual 45 Boot Display determines the display output device where the system boots. The default setting is LVDS . Panel Scaling With the default setting of Auto, this item automatically displays the resolution of the panel used in the system to ‘ full ’ screen.
BIOS SETUP 46 IB850 User’s Manual Int egrated Peripherals This section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow.
BIOS SETUP IB850 User’s Manual 47 ECP Mode Use DMA 3 IDE HDD Block Mode This field allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive. OnChip Primary/Secondary PCI IDE The integrated peri pheral controller contains an IDE interface with support for two IDE channels.
BIOS SETUP 48 IB850 User’s Manual USB Mouse Support The options for this field are Enabled and Disabled . By default, this field is set to Disabled . AC97 Audio The default setting of the AC97 Audio is Auto . CSA LAN (Giga - LAN) The default setting of t he onboard Gigabit LAN is enabled.
BIOS SETUP IB850 User’s Manual 49 Power Management Setup The Power Management Setup allows you to save energy of your system effectively. Phoenix - AwardBIOS CMOS Setup Util ity Power Management Set.
BIOS SETUP 50 IB850 User’s Manual Po wer Management This field allows you to select the type of power saving management modes. There are four selections for Power Management. Min. Power Saving Minimum power management Max. Power Saving Maximum power management.
BIOS SETUP IB850 User’s Manual 51 CPU THRM - Throttling W hen the system enters Doze mode, the CPU clock runs only part of the time. You may select the percent of time that the clock runs. Wake - Up by PCI Cards Enable this field to allow wake up function through a PCI card.
BIOS SETUP 52 IB850 User’s Manual PNP/PC I Configurations This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.
BIOS SETUP IB850 User’s Manual 53 PC Health Status This section shows the parameters in determining the PC Health Status. These parameters include temperatures, fan speeds and voltages. Phoenix - AwardBIOS CMOS Setup Utility PC Health Statu s CPU Warning Temperature Disabled ITEM HELP Current CPU Temp.
BIOS SETUP 54 IB850 User’s Manual Freque ncy/Voltage Control This section shows the user how to configure the processor frequency. Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Au.
BIOS SETUP IB850 User’s Manual 55 Load Fail - Saf e Defaults This option allows you to load the troubleshooting default values permanently stored in the BIOS ROM.
DRIVERS INSTALLATION 56 IB850 User’s Manual Drivers Installation This section describes the installation procedures for software and drivers under the Windows 98 , Windows NT 4.0 and Windows 2000. The software and drivers are included with the CPU card.
DRIVERS INSTALLATION IB850 User’s Manual 57 Intel 875P Chipset Software Intallation Utility The Intel 875P Chipset Drivers should be installed first before the software drivers to enable Plug & Play I N F support for Intel chipset components. Follow the instructions below to complete the installation under Windows 98/98SE/ME/2000/XP.
DRIVERS INSTALLATION 58 IB850 User’s Manual 3. When the Welcome screen appears, click Next to continue. 4. Click Yes to accept the software license agreement and proceed with the installation process.
DRIVERS INSTALLATION IB850 User’s Manual 59 5. On Readme Information screen, click Next to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect. When the computer has restarted, the system will be able to find some devices.
DRIVERS INSTALLATION 60 IB850 User’s Manual Realtek AC 97 C odec A udio D river Installation Follow the steps below to install the Realtek AC97 Codec Audio Drivers. 1. Insert the CD that comes with the CPU card and the screen below would appear. Click Intel Chipsets, then Intel 875P Chipset Fa mily Drivers.
DRIVERS INSTALLATION IB850 User’s Manual 61 Intel PRO LAN Drivers Installation The Intel PRO LAN drivers support both Intel® PRO/100 and PRO/1000 drivers. Follow the steps below to complete the installation. 1. Insert the CD that comes with the CPU card and the screen below would appear.
DRIVERS INSTALLATION 62 IB850 User’s Manual ATI M7 VGA Driver Installation 1. Insert the CD that comes with the CPU card. On the initial screen, click VGA Card on the left side and the screen below would appear. Click ATI Mobility Radeon M 6/M 7 series VGA Driver.
DRIVERS INSTALLATION IB850 User’s Manual 63 3. Click Yes to accept the software license agreement and proceed with the installatio n process. 4. Select on the Express icon and click Next to continue. Remarks : The ATI M7 VGA controller is supported by the optional MicroAGP VGA card.
DRIVERS INSTALLATION 64 IB850 User’s Manual ATI M 9/M10 VGA Driver Installation 1. Insert the CD that comes with the CPU card. On the ini tial screen, click VGA Card on the left side and the screen below would appear. Click ATI Mobility Radeon M 9/M10 series VGA Driver.
DRIVERS INSTALLATION IB850 User’s Manual 65 3. Click Yes to accept the software license agreement and proceed with the installation process. 4. Click t he Express icon and click Next to continue the drivers installation process .
An important point after buying a device Intel IB850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel IB850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel IB850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel IB850 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel IB850 will certainly help you make a decision on the purchase.
If you already are a holder of Intel IB850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel IB850.
However, one of the most important roles played by the user manual is to help in solving problems with Intel IB850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel IB850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
