Instruction/ maintenance manual of the product EUROCOM 450 Intel
Go to page of 23
Intel ® Core 2 Duo based CPU Board hardware documentation Revision 0A.
Revision Revision Changes Date / Name 0A First Edition 30.10.07 / ac.
III DISCLAIMER Copyright © 2007 ELTEC Elektronik AG. The information, data, and figures in this document including respective references have been verified and found to be legitimate. In particular in the event of error they may, therefore, be changed at any time without prior notice.
IV SAFETY INFORMATION Electrical safety Þ To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before reloading the system. Þ When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
I hardware documentation table of contents 1. Specificat ion .......................................................................................................1 1.1. Blockdiagram ...................................................................
II hardware documentation 4.2. COM Exp ress .................................................................................................................... 13 4.3. Memory ...........................................................................
III hardware documentation list of table Table 3.1: COMExpress Connector ................................................................................................................................ 11 Table 4.1: Resolution Table...................
IV hardware documentation list of figures Figure 1.1: Blockdiagram ............................................................................................................................................. 1 Figure 2.1: Intel Boot Agent Setup Screen .
1 hardware documentation 1. Specification 1.1. Blockdiagram Me moryb us 2 Channel DDR2 Hublin k PCIE xp ress GTL - B us MCH E75 20 ICH E6300ESB CPU Merom Memor y DDR2 max 4 Gbyte PCI 32/33 PC I- X GbE i82541PI BIOS Vi d e o SM712 COM Exp ress Conn ector LPC EIDE SA T A Gb E USB2 Figure 1.
2 hardware documentation 1.2. Main Features Þ COM Express CPU board Þ Intel® Core 2 Duo T7400 or L7400 Þ Up to 4 GB DDR2-400 memory on two DIMM modules Þ 10/100/1000 Mbps network interface, attached to PCI-X Þ On-board graphics up to 1280 x 1024 Þ COM Express format with PCI and PCI Express interfaces Þ USB 2.
3 hardware documentation 1.3. Overview 1.3.1. Technical Details The EUROCOM 450 is a Intel® Core 2 Duo T7400 or L7400 based single board computer on a COM Express board for compact industrial real-time systems.
4 hardware documentation 1.3.1.4. Graphics Interface The on-board graphics controller is a PCI-based chip (SM 71 2). Maximum display resolution is 1280 * 1024 * 60 Hz @24 bit/pixel. Resolution fps 800x600 60, 75, 85 1024x768 60, 75, 85 1280x1024 60 1.
5 hardware documentation 1.4. Installation 1.4.1. Introduction Do always observe precautions for handling electrostatic de vices when unplugging boards from the rack or otherwise handling boards. Avoid touching integrated circuits except in an electrostatic free environment.
6 hardware documentation At least plug the modul onto the carrierboard and fix it. Make sure that the power supply within the rack meets the power requirements specified in Section "Power Requirements". Also the operating requirements must meet the values specified in Section "Environmental Conditions".
7 hardware documentation During early POST, no video is available to display error messages should a critical error be encountered; therefore, POST uses beeps on the speaker to indicate the failure of a critical system component during this time. A later chapter lists the Beep codes and their meanings.
8 hardware documentation 2.2. Intel Boot Agent / PXE The Intel Boot Agent is a software product that allows th e EUROCOM 450 to boot using a program code image supplied by a remote server. The Intel Boot Agent complies with the Pre-boot eXecution Environment (PXE) Version 2.
9 hardware documentation Try local drives first, then network If this option is selected then the BOOT Agent tries to boot fr om the local drives first. If this fails then the network boot is tried. Try network only If this option is selected then the BOOT Agent tries to boot from the network.
10 hardware documentation 2.2.3. Diagnostics Information Anytime the configuration setup menu is displayed, you may press the D key to display diagnostics information on the screen. The information displayed appears similar to that shown in the lower half of the screen image below.
11 hardware documentation 3. Interface Connectors 3.1. COMExpress Connector Table 3.1: COMExpress Connector Row A Row B Row C Row D A1 GND B1 GND C1 GND D1 GND A2 GBE0_MDI3- B2 GBE0_ACT# C2 IDE_D7 D2 .
12 hardware documentation A56 PCIE_TX4- B56 PCIE_RX4 - C56 PEG_RX1- D56 PEG_TX1- A57 GND B57 GPO2 C57 TYPE1# D57 TYPE2# A58 PCIE_TX3+ B58 PCIE_RX 3 + C58 PEG_RX2 + D58 PEG_TX2+ A59 PCIE_TX3- B59 PCIE_.
13 hardware documentation 4. Board Parameters 4.1. Host Bus Þ 667 MHz 4.2. COM Express COMExpress interface according to specification Þ Type 2 Þ PCI Express (2 * x8, 1 * x4, 1 * x1) Þ PCI 32/33 Þ 2 * SATA Þ 1 * IDE Þ 1 * VGA Þ 1 * LVDS Þ 1 * GbE Þ 4 * USB 2.
14 hardware documentation Þ CLUT: 4/8/16/24 bit/pixel Þ 16, 256, 32 K, 64 K, 16 M colors depending on screen resolution Þ Video Resolution: 640 x 480 – 1024 x 768 Þ Vertical Frequencies: max 85 Hz Table 4.
15 hardware documentation 5. Programmers Reference 5.1. Interrupts The EUROCOM 450 uses the PC interrupts for different purposes . First there are the PC compatible interrupt sources like timer, keyboard, EIDE, real-time clock and coprocessor. These interrupt sources require dedicated interrupt numbers, which are fixed.
An important point after buying a device Intel EUROCOM 450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Intel EUROCOM 450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Intel EUROCOM 450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Intel EUROCOM 450 you will learn all the available features of the product, as well as information on its operation. The information that you get Intel EUROCOM 450 will certainly help you make a decision on the purchase.
If you already are a holder of Intel EUROCOM 450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Intel EUROCOM 450.
However, one of the most important roles played by the user manual is to help in solving problems with Intel EUROCOM 450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Intel EUROCOM 450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
