Instruction/ maintenance manual of the product 310-402XX Integra
Go to page of 10
Series 310-401XX and 310-402XX Shoc k Shoc k R epair R epair Guide Guide.
Kit Contents The following parts are supplied with your Integra shocks valving kit: V alve disc storage case Misc. valve discs Bleed discs Spare piston bands Spare rod seals Spare rod guide seals Spare end cap seals Spare fl oating piston seals Spare nitrogen fi ll valves Spare poppet parts Inte g r a Shoc k T ools 1.
T ools Y ou W ill Need Y ou will need to have the following additional tools/equipment to re-valve our dampers: 1. Nitrogen tank . The tank can be purchased at a local gas supply store. A small 40 lb. tank will likely last you for a full season. 2. 350 PSI pressure regulator .
V alving T he Head Assembl y 1. Clamp the head assembly in the vice (B1) . 2. Set up a clean, low lint paper towel on the bench next to the vice. 3. Using a marker , label the upper right hand corner of the paper towel with an “R” (rebound) and the lower right hand corner of the paper towel with a “C” (compression).
13. Stack the compression discs onto the disc travel limiter . Place the disc stack/travel limiter on the piston rod. (B7) . 14. Place the piston on top of the compression stack. Be sure to orient the piston properly . Face the piston side marked with a “C” towards the compression valve stack.
Assembl y C • Be sure all seals are lubricated with O-ring lube prior to assembling the unit. • Once the head assembly has been completely built, the damper can be assembled as follows: 1.
C5 Assembl y C (Continued) 9. Slide the rod guide down the shaft into the shock body . Be sure to keep the piston submerged in oil the entire time. 10. T ighten the rod guide into the shock body with the rod in the fully extended position. Do this slowly so that the air below the rod guide has an opportunity to escape past the threads (C5) .
PRELOAD V AL VE ST ACK COMPRESSION V AL VE ST ACK REBOUND V AL VE ST ACK 1 2 3 4 5 6 7 8 9 10 11 12 13 12 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 36 35 15 14 Item No. Description Part No. 1 Retaining Ring - Spherical Bearing . . . . .
DESCRIPTION P ART # PRICE Shock V alving Kit 310-30202 $315.00 INTEGRA SHOCK V AL VING KIT DESCRIPTION P ART # PRICE Shock Oil 310-30900-1 $9.95 DESCRIPTION P ART # PRICE Shock Vise 310-30204 $169.95 Shock Vise Bench Mount 310-30205 $39.95 INTEGRA SHOCK OIL DESCRIPTION P ART # PRICE Inflation Unit 310-30310 $82.
Standard Monotube Valving 1/25/07 XXX2 XXX 3 XXX3- 5 XXX3- 6 XXX3- 7 XXX 4 XXX4. 5 XXX 5 XXX5- 3 XXX5. 5 XXX 6 XXX96-2 XXX 7 Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound Rebound .006-.700 .008-.700 .006-.
An important point after buying a device Integra 310-402XX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Integra 310-402XX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Integra 310-402XX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Integra 310-402XX you will learn all the available features of the product, as well as information on its operation. The information that you get Integra 310-402XX will certainly help you make a decision on the purchase.
If you already are a holder of Integra 310-402XX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Integra 310-402XX.
However, one of the most important roles played by the user manual is to help in solving problems with Integra 310-402XX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Integra 310-402XX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
