Instruction/ maintenance manual of the product 895 3M
Go to page of 11
Pad Staff Workstation Model 895 Owner’s Manual 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 www.3M.com/library.
© 2006 3M. Al l r ig ht s r ese rv ed . 3M™ Pad Staff Workstation Model 895 Owner’s Man ual 78-8129-2551-5_B 3M is a trademark of 3M..
Table of Contents SAFETY INFO RMATION .................................................................. 1 Intended Use ................................................................................................................... 1 Label Locations .
.
1 SAFETY INFORMATION Read, understand, and follo w all safety information containe d in these instructions prior to installation and use of th e 3M ™ Pad Staff Workstation. Retain thes e instructions for future reference. Intended Use The 3M™ Pad Staff Workstation Model 895 is intended for u se in che c k- in/check-out of library materials.
2 WARNING To reduce the risks asso ciated with hazardous voltage c ontained within the power supply, which, if not avoided, could result in death or serious injury : Do not use the power supply if.
3 Label Locations 895_SPG_001 3 3M RFID Reader TM 3M RFID Reader Pad TM I.T .E. LISTED 4P24 .T .E. LISTED 4P24 N1 10 8 3 Model 895 12 VDC 0,3 A 3M Library Systems S t.
4 EMC, USA, and Canada Compliance FCC Radio Frequency Rules and Regulations This equipment has been tested a nd fou nd to comply with the limits for a Class A device, pursuant to Part 15 of the F CC Rules.
5 Overview Introduction The 3M™ Pad Staff Workstation Model 895 is used with a customer su pplied computer and 3M software to read and/or program 3M™ ISO RFID Tags.
6 Equipment specifications RFID Reader Pad Dimensions Length: 11.4 in. (28.9 cm) Width: 11.4 in. (28.9 cm) Height: 0.4 in. (1.0 cm) Read range At least 10 in. (25.4 cm) with a book tag in the cente r o f the RFID Reader Pad. Metal surfaces within 2 in.
7 Requesting Service Before you call Before you call 3M Service, have t he following information available: Have the RFID Reader Pa d con nected with power applied and ne ar the telephone. Write down the RFID Reader Pad’ s serial number (loc ated on the b ottom of the RFID Reader Pad).
An important point after buying a device 3M 895 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 895 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 895 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 895 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 895 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 895, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 895.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 895. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 895 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
