Instruction/ maintenance manual of the product 92R Ingersoll-Rand
Go to page of 12
Form P6401 Edition 6 October 2005 CCN 03528635 Nonreversible and Reversible MUL TI–V ANE ® Geared Motors 92N and 92R Series Operations and Maintenance Information Save These Instructions.
2 Form P640 1-Edition 6 WARNING General Pr oduct Safety In formation • Read and underst and this manual before operating this motor . • It is your responsibility to make this safety informa tion available to others that will operate this motor . • Failure to observe the f ollowing warnings could result in injury .
Form P6 401 Editi on 6 3 than the V ent plug from t he upper side of the motor an d connect an oil l ine from a gravi ty feed reserv oir . Connect an overflow lin e to the Level Plug opening and run it to a pump to return the lub ricant to the gravity f eed reservoir .
4 Form P640 1-Edition 6 Reversible Motor Applicatons Air Flow Information NOTICE When these motors are used on applications re quiring a reversible motor , a 4–way throttle v a lve or two 3– way throttle valves must be used in the air supply li ne in acc ordance with the following schematic diagram (TPB491).
Form P6 401 Editi on 6 5 Notes.
6 Form P640 1-Edition 6 92N and 92R Series Exploded Diagram (Dwg. TP A551-1).
Form P6 401 Editi on 6 7 92N and 92R Series Part s List Sl. No. Description Part Number Sl. No. De scription Part Number 1 Motor Housing Cover for Model 92 NA008 or for Serie s 92N 92N-102 92RA008 48N.
8 Form P640 1-Edition 6 92N and 92R Series Parts List (Continued) Sl. No. Description Part Number Sl. No. Description Part Number • 32 Motor Shaft Thrust Bearing 92RB045 48NB-762-029 Race for Model .
Form P6 401 Editi on 6 9 Maintenance Section Disassembly General Instructions 1. Do not disassemble the mot o r any further th an necessary to replace or repair da maged parts. 2. Do not disassemble the moto r unless you have a complete set of ne w gaskets and O– ri ngs for replacement.
10 Form P640 1-Edition 6 Assembly General Instructions 1. Always press o n the inner ring of a ball–type be aring when installing the bearing o n a shaft. 2. Always press on th e outer ring of a ball–type b earing when pressing the bearing into a bearing r ecess.
Form P6 401 Editi on 6 11 6. Using a piece of tubing tha t contact s the inner ring of the First S tage Intermediate Gear Front Bearing (23), press the Bearing o nto the shaf t adjacent to the small spline of the First S tage Intermediat e Gear (21). 7.
www .irtools.com © 2005 Ingersoll-Rand Company.
An important point after buying a device Ingersoll-Rand 92R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand 92R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand 92R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand 92R you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand 92R will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand 92R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand 92R.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand 92R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand 92R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
