Instruction/ maintenance manual of the product 8246-D Ingersoll-Rand
Go to page of 12
Tool Products OPERATOR’S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE BANT-A-MATIC® SELF-FEED DRILLS Models 8246-D( )-( ) SECTION M104 MANUAL 13 Released: 4-1-88 Revised: 12-l 2-94 Form: 3266-2 IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.
FEED RATE CONTROL VALVES l Turn valve (23), marked “R” on top of housing, approximately 1-1/2 turns counterclockwise (open). l Turn the other valve (23), marked “F” on top of housing, clock- w.
SET-UP PROCEDURE WITH OPTIONAL M104 HYDRAULIC CHECK 13 Assemble hydraulic check to mounting bracket and assemble mounting bracket to tool using washers (Y14-8) and cap screws Measure distance from tap point to work piece - distance “Y”.
37601 TORQUE ARM ASS’Y 1 '37625 42920 42921 HOUSING CLUTCH SPRING, SMALL (3) CLUTCH SPRING, LARGE (3) CLUTCH ADJUSTMENT CAP SPRING CLUTCH SLEEVE SPRING CUP DRIVER CLUTCH DRIVER CLUTCH PLATE CLU.
DISASSEMBLY/ASSEMBLY INSTRUCTIONS M104 13 l Never apply excessive pressure by a holding device which may cause distortion of a part. l Apply pressure evenly to parts which have a press fit. l Apply even pressure to the bearing race that will be press fitted to the mating part.
.
Ml04 13.
+ ASSEMBLE WITH THREAD ADHESIVE SUCH AS LOCTITE 242 MODEL R.P.M. MOTOR AUXILIARY DRIVE TOTAL NUMBER ASSEMBLY GEARING GEARING RED. 8246-D5-2( ) 550 33654-2 36287 39478 38.6:1 8246-D8-2( ) 900 34746-2 36017 39478 23.3:1 8 MODELS WITH -EU SUFFIX ARE “EC” COMPLIANT MODELS.
DISASSEMBLY/ASSEMBLY INSTRUCTIONS M104 GEARING DISASSEMBLY -Remove tapper attachment from tool. -Thread adjustment screws (6) and (7) all the way bock and push the piston rod (48) all the way forward to expose wrench flats of motor housing (51) from the outer sleeve (41).
: 3 4 i 7 i 10 11 12 13 14 15 16 17 18 19 20 21 2’: z.2 26 ii 29 30 33: 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Cover Pipe Plug Adapter Lock Washer Trip Bracket Adjustment Screw “A” A.
TROUBLE SHOOTING M104 13 LISTED BELOW ARE SOME OF THE MOST COMMON CAUSES FOR THE SELF-FEED DRILL TO MALFUNCTION. MALFUNCTIONS BEYOND THE SCOPE OF THIS MANUAL SHOULD BE BROUGHT TO THE ATTENTION OF YOUR ARO REPRESENTATIVE OR RETURN THE TOOL TO FACTORY FOR REPAIR.
DIMENSIONAL DATA I PN 49999-057.
An important point after buying a device Ingersoll-Rand 8246-D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ingersoll-Rand 8246-D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ingersoll-Rand 8246-D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ingersoll-Rand 8246-D you will learn all the available features of the product, as well as information on its operation. The information that you get Ingersoll-Rand 8246-D will certainly help you make a decision on the purchase.
If you already are a holder of Ingersoll-Rand 8246-D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ingersoll-Rand 8246-D.
However, one of the most important roles played by the user manual is to help in solving problems with Ingersoll-Rand 8246-D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ingersoll-Rand 8246-D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
