







Please read the safety instructions booklet before setting up the projector.
Registration / Reference guide / Online resources Register to activate your warranty to ensure eligibilty for service and support, and get special offers and notifications about free product updates.
Reference guide languages:
Inscription / Guide de référence / Ressources en ligne Activez votre garantie pour avoir droit aux réparations et à l’assistance et obtenir les notifications d’offres spéciales et les avis sur les mises à niveau gratuites des produits. Registro / Manual de referencia / Recursos en línea Active la garantía para asegurarse los beneficios del servicio y soporte técnico. Reciba ofertas especiales y notificaciones sobre las actualizaciones gratuitas de nuestros productos. Registrierung /Referenzanleitung / Online-Ressourcen Aktivieren Sie Ihre Garantie, sodass Sie für Service und Unterstützung berechtigt sind. Sie erhalten Sonderangebote und Benachrichtigungen über kostenlose Aktualisierun- gen.
CD-ROM Product Registration and Reference Guide
Lens Cap and Tether
Save the box and packing materials.

Please dispose of batteries in an environmentally proper manner.
Buy a Full-Featured Remote and Other Custom Accessories

The top of your projector includes a convenient indicator panel with symbols that light up to show important status.

Connect source Color-coded connections make it easy. You can connect more than one source if needed.

Got an Apple computer? You may need an adapter. For more information, see How-To Guides at www.infocus.com/support/howto
Connect video using either an S-Video or a Composite Video cable
Connect audio using a Mini-Plug to RCA Audio Y-Cable
Connect the source's audio output to a receiver/amplifier or home theater system with separate speakers.

1 Connect the power cord to the projector and to an electrical outlet
The power light on the projector will light amber.

Press power (on the projector or remote). The power light will start blinking green.
After a few seconds, the power light will stop blinking and turn green. It can take a minute for the lamp to reach full brightness.
After a few seconds, the power light will stop blinking and turn green. It can take a minute for the lamp to reach full brightness.
5-10 sec.
You may need to press a specific key combination to activate your laptop's external video port. On most laptops, hold down the FN key while pressing a key labeled CRT/LCD, LCD/VGA, a monitor icon , or similar. Key combos for popular models:
Apple F7 Dell Fn+F8 Fujitsu Fn+F10
IBM ThinkPad Fn+F7 Toshiba Fn+F5 Gateway Fn+F3 or Fn+F4 HP/Compaq Fn+F4 or Fn+F6 Sony Fn+F7
Complete laptop activation chart at www.infocus.com/support
If needed, press source (on the projector or remote) to view the source. You may have to press it more than once.
source


As distance increases, the image gets larger and moves upwards.
1 Hold down the release button on top of the projector. 2 Lift the front of the projector to the desired height. 3 Release the button.

Press the keystone buttons to make the picture square.
Adjust zoom first, then focus the center of the image.
System menu (press menu, then select Settings > System > Ceiling).
Focus · Zoom

1 Press menu to show menus 2 Press or to choose items (or adjust setting) 3 Press select to confirm menu choice 4 Press menu to hide menus
Controlling your presentations Connect the computer cable (including USB) to your computer, then use and to move through your presentation slides.
The first press shows a confirmation message; the second press confirms that you want to power off.
The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on.
Activate your warranty to ensure eligibility for service and support. Get special offers and notifications about free product updates.
It's printed on the label on the back of the projector. You'll need it to register (and if you ever need to contact support).
Serial number:
Read the Reference Guide
Insert the CD-ROM, or go to www.infocus.com/support The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and operation, including lamp replacement instructions. The Reference Guide is also available at www.infocus.com/support
Using the menus

If there is no picture or the picture is blank If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet. If the power light is amber and not blinking, press the power button. Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector. Make sure your computer's video port is enabled. Press the key combination that activates your laptop's external video port (see step ). If there is still no image, restart your laptop. Press the Source button. You may need to press it several times to view the correct source. Press the Auto Image button.
If "Signal out of range" is shown, or the picture looks bad Press the Auto Image button. If that doesn't help (and the source is a computer), reduce your computer's display resolution or vertical refresh rate.
If the replace lamp light is on Turn the projector off and wait at least one minute, then turn it on again. If the replace lamp light turns on again, the lamp needs to be replaced. For lamp replacement instructions, see the Reference Guide, which is on the included CD-ROM or can be downloaded at
If the high temperature light is on Turn the projector off and remove anything that may be blocking the air vents on its side. Leave the projector off for at least one minute to let it cool before turning it on again. Important: Continuous operation at high temperature may reduce the lifetime of the lamp and/or projector.
If the service required light is on Turn the projector off and wait at least one minute, then turn it on again. If the service required light turns on again, the projector needs to be serviced. See below for service contact information.
The Reference Guide is on the included CD-ROM,
or download it at www.infocus.com/support
source

Visit us at: www.infocus.com/support
USA, Canada, Latin America Customer Support Telephone +1 (503) 685-8888 TOLL FREE: 800-799-9911 Mon-Fri, 7 am - 5 pm Pacific techsupport@infocus.com
Asia Pacific Customer Support Telephone Singapore: +65 63539449 China: 800.828.2268 Australia: 1300-725-295 Australia Direct Sales: 1800-885-841 Mon-Fri, 9 am - 5 pm SGT asia-support@infocus.com
Europe, Middle East, Africa Customer Support Telephone +31 (0)36 539 2820 Mon-Fri, 08:30 - 18:00 CET emea.support@infocus.com
Declaration of Conformity Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA European Office: Louis Armstrongweg 110, 1311 RL Almere, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 2004/108/EC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC, Safety: IEC 60950-1:1st Edition
Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus, and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries.
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate the equipment.
EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.
Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Agency Approvals Product Models: W360 UL, CUL, NOM, IRAM, GOST, C-tick Other specific Country Approvals may apply. Please see product certification label.
InFocus reserves the right to alter product offerings and specifications at any time without notice.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.