



This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe- gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, please read these instructions.
Le mode d'emploi complet est disponible sur le CD joint sous forme de fichier pdf d'Adobe Acrobat dans les langues suivantes : anglais, français, allemand, italien, norvégien, portugais, espagnol, russe, japonais, coréen, chinois traditionnel, chinois simplifié. Avant d'utiliser ce projecteur, veuillez lire ces instructions.
Die vollständige Benutzeranleitung ist auf der im Lieferumfang enthaltenen CD als Adobe Acrobat PDF-Datei in den folgenden Sprachen verfügbar: Englisch, Französisch, Deutsch, Italienisch, Norwegisch, Portugiesisch, Spanisch, Russisch, Japanisch, Koreanisch, Traditionelles Chinesisch und Vereinfachtes Chinesisch. Bitte lesen Sie diese Anweisungen vor der Verwendung des Projektors.
La presente guida è disponibile sul CD allegato, come file Adobe Acrobat pdf, nelle seguenti lingue: inglese, francese, tedesco, italiano, norvegese, portoghese, spagnolo, russo, giapponese, coreano, cinese tradizionale e cinese semplificato. Prima di usare questo proiettore, leggere le seguenti istruzioni.
Hele denne brukerhåndboken finnes på den vedlagte CD-en som en Adobe Acrobat pdf-fil på følgende språk: Engelsk, fransk, tysk, italiensk, norsk, portugisisk, spansk, russisk, japansk, koreansk, tradisjonell og forenklet kinesisk. Les diss anvisningene før projektoren tas i bruk.
Este guia do usuário completo está disponível no CD anexo, como um arquivo pdf do Adobe Acrobat nos seguintes idiomas: inglês, francês, alemão, italiano, norueguês, português, espanhol, russo, japonês, coreano, chinês tradicional, chinês simplificado. Antes de utilizar este projetor, leia estas instruções.
Este manual de uso está disponible en su totalidad en el CD incluido, como archivo pdf de Adobe Acrobat, en los siguientes idiomas: inglés, frances, alemán, italiano, noruego, português, español, ruso, japonés, coreano, chino tradicional, chino simplificado. Antes de usar el proyector, lea estas instrucciones.
Ⱦɚɧɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ ɜ ɩɨɥɧɨɦ ɨɛɴɟɦɟ ɩɪɟɞɫɬɚɜɥɟɧɨ ɧɚ ɩɪɢɥɚɝɚɟɦɨɦ ɤɨɦɩɚɤɬ-ɞɢɫɤɟ ɜ ɜɢɞɟ pdf-ɮɚɣɥɚ Adobe Acrobat ɧɚ ɫɥɟɞɭɸɳɢɯ ɹɡɵɤɚɯ: ɚɧɝɥɢɣɫɤɨɦ, ɮɪɚɧɰɭɡɫɤɨɦ, ɧɟɦɟɰɤɨɦ, ɢɬɚɥɶɹɧɫɤɨɦ, ɧɨɪɜɟɠɫɤɨɦ, ɩɨɪɬɭɝɚɥɶɫɤɨɦ, ɢɫɩɚɧɫɤɨɦ, ɪɭɫɫɤɨɦ, ɹɩɨɧɫɤɨɦ, ɤɨɪɟɣɫɤɨɦ, ɬɪɚɞɢɰɢɨɧɧɨɦ ɢ ɭɩɪɨɳɟɧɧɨɦ ɤɢɬɚɣɫɤɨɦ. ɉɟɪɟɞ ɢɫɩɨɥɶɡɨɜɚɧɢɟɦ ɩɪɨɟɤɬɨɪɚ, ɩɪɨɱɢɬɚɣɬɟ ɞɚɧɧɵɟ ɢɧɫɬɪɭɤɰɢɢ.
ŘųKПП .ŴЕ
동봉된 CD에는 Adobe Acrobat pdf 파일 형식의 사용 설명서가 영어, 프랑스어, 독일어, 이탈리아어, 노르웨이어, 포르투갈어, 스페인어, 러시아어, 일본어, 한국 어, 중국어(번체 및 간체)로 제공됩니다. 이 프로젝터를 사용하기 전에 다음 지침을 읽으십시오.

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. InFocus and LP are trademarks or registered
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of International
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
We declare under our sole responsibility that the InFocus X1 projector conforms to the following directives and norms:
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
is encouraged to try to correct the interference by one or more of the following measures:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
--Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
--Increase the separation between the equipment and receiver.
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC
EMC Directive 89/336/EEC, Amended by 93/68/EEC
--Reorient or relocate the receiving antenna.
trademarks of InFocus Corporation.
UL, c-UL, TÜV, NOM, IRAM, GOST
FCC Warning
EMC: EN 55022
EN 55024
Trademarks
EN 61000-3-2
EN 61000-3-3
Canada
June, 2003

If you are experienced in setting up projection systems, use the Quick Setup
card that was included. For complete details on connecting and operating
Guide in multiple languages are available on the included CD and on our
The website also has technical specifications (an interactive image size cal-
Do not place the projector on a tablecloth or other soft coverings that may
block the front or back vents. Do not use a non-approved ceiling mount. In
the unlikely event of the bulb rupturing, thoroughly clean the area in front
of the projector and discard any edible items that may have been placed in
the projector, refer to this User’s Guide. Electronic versions of this User’s
product data sheet), a web store to buy accessories, and a page for online
culator, laptop activation commands, connector pin outs, a glossary, the
Do not place objects in
this area in front
website at www.infocus.com/service.
2 ft (.6m)
registration.
that area.
Introduction 4 Positioning the projector 5 Projector and Device Connector Guide 6 Computer connections 6 Video connections 6 Connecting a computer source 9 Required computer connections 9 Optional computer connections 9 Displaying a computer source image 10 Adjusting the image 11 Using the projector with Windows 98 for the first time 12 Connecting a video device 14 Video device connections 15 Composite video connection 15 S-video connection 15 Component video connection 16 VGA connection 16 Displaying video 17 Adjusting the image 17 Shutting down the projector 19 Troubleshooting your setup 19 Using the remote control 27 Using the audio 28 Using the keypad buttons 28 Optimizing computer images 29 Presentation features 29 Optimizing video images 30 Customizing the projector 30 Using the menus 31 Picture menu 32 Settings menu 35 Maintenance 38 Cleaning the Lens 38 Replacing the Projection Lamp 38 Cleaning the Lamp Housing Screens 40 Using the security lock 40 Appendix 41 Specifications 41 Accessories 41 Projected image size 43 Red LED Behavior and Projector Errors 43
of the projector




computer monitor S-video audio video USB
ment. The InFocus® X1 is compatible with a wide variety of computers and
sources (1080i, 1035i, and 720P HDTV formats), TV and satellite tuners,
exceptional projector for both business presentations and home entertain-
The projector has native SVGA 800x600 resolution and comes with the fol-
Your new digital projector is easy to connect, use, and maintain. It is an
Register your projector online at www.infocus.com/service/register to
receive product updates, announcements, and registration incentives.

camcorders, video games, and laser disc players.
lowing standard accessories.
video devices, including:
lution.
tion.

10 ft high image Projection angle in 4:3 mode (default)
4.8 ft. 7.5 ft. 19 ft.
12.5 ft.
5 ft.
3.3 ft.
1.22 ft above lens
To determine where to position the projector, consider the size and shape of
sion cables). To ensure adequate cable access, do not place the projector
112.2% when the projector is in 4:3 mode (default mode). This means that if you have an image 10’ high, the bottom of the image will be 1.22’
the projector and the rest of your equipment. Here are some general guide-
guide that comes with the Ceiling Mount Kit for more information. To
turn the image upside down, see “Ceiling” on page 35. InFocus recom-
mends using an authorized InFocus ceiling mount. The Ceiling Mount
means that if you have an image 10’ high, the bottom of the image will
your screen, the location of your power outlets, and the distance between
within 6 feet (1.8m) of your video device (unless you purchase exten-
from the lens of the projector to the screen, the zoom setting, and the
video format determine the size of the projected image. The top illus-
tration to the right shows three projected image sizes. For more infor-
mation about image sizes at different distances, see “Projected image
projector must be at least 4.9 feet (1.49m) from the projection screen.
Kit is sold separately; see “Optional Accessories” on page 42.
within 6 inches (.15m) of a wall or other object.
be 3.29’ above the center of the lens.
above the center of the lens.
on 16:9 and 4:3 modes.
size” on page 43.
lines:
lens center · bottom of image

standard VCRs, DVD players (progressive and interlaced), HDTV sources (1080i, 1035i, and 720P HDTV formats), TV and satellite tuners, camcorders, video
The first step for connecting video is deciding what type of output connector you want to connect to the projector has. If there is more than one output, select
If you are connecting the projector to HDTV sources, the projector’s computer (VGA) connector, labeled Video In, should be used. Keep in mind that HDTV
The following should help you find the connectors that you want to use to obtain the best resolution possible from your input devices, such as computers,
include attaching the included audio cable from computer to projector, connecting the computer monitor to the projector, and connecting a USB cable (not-
included) from the computer to the projector to advance slides in a PowerPoint™ presentation. See page 9 for setup computer/projector setup information.
and progressive sources should only be handled through the projector’s VGA connector. The S-video port does not function with progressive sources, even
with an the optional Component to S-video adapter. With progressive sources, the optional Component to VESA adapter must be used. Both of these adapt-
Computer connections involve attaching the computer cable included with the projector from a computer to the Computer In input. Optional connections
computer in monitor s-video audio in video in USB
the one with the highest quality. The best quality ranking, with 1 being the highest and 3 being the lowest, is:
ers can be found in “Optional Accessories” on page 42 for ordering information.
games (progressive and interlaced), and laser disc players.
Video connections

Composite video connection on
Component video connection on
Composite video connection on
Component video connection on
Composite video connection on
Component video connection on
S-video connection on page 15
S-video connection on page 15
S-video connection on page 15
on Projector Comments For Setup Instructions, see
page 15.
page 15.
page 15.
(i.e. HDTV) sources.
(i.e. HDTV) sources
(i.e. HDTV) sources
See next page.
See next page.
See next page.
Compatibility If Your Device

480i Component video connection on
Component video connection on
Component video connection on
on Projector Comments For Setup Instructions, see
480i VGA connection on page 16
VGA connection on page 16
VGA connection on page 16
Compatibility If Your Device
EDTV



the other end to the video port on your computer. If you are using a desktop
computer screen as well as on the projection screen, connect the computer’s
devices) to the dark blue Computer In connector on the projector. Connect
Connect the black power cord to the Power connector on the side of the pro-
To have sound with your presentation, connect the audio cable to your com-
To advance slides in a PowerPoint presentation using the remote, plug the
Connect one end of the computer cable (see page 14 for connecting video
your computer. USB drivers must be installed to use the USB feature. For
If you are using a desktop computer and want to see the image on your
USB connector on the computer cable into the USB mouse connector on
computer, you will need to disconnect the monitor cable from the com-
monitor cable to the Monitor Out connector on the projector.
puter and to the Audio In connector on the projector.
more information For more information, see page 13.
Required computer connections
Optional computer connections
jector and to your electrical outlet.
puter’s video port first.



activate laptop’s external port
Many laptops do not automatically turn on their external video port when a
The LED flashes green and the fans start to run. When the lamp comes on,
The computer’s image should appear on the projection screen. If it doesn’t,
turn the external display on and off. Refer to your laptop’s documentation
If your computer has Windows 98 as its operating system, see “Using the
projector is connected. Usually a key combination like FN + F5 is used to
? No laptop image? Try pressing the Auto Image button on the key-
Toggle the Power switch on the side of the projector to the On position.
projector with Windows 98 for the first time” on page 12 regarding the
the start up screen displays and the LED is steady green. It can take a
press the Computer button on the projector’s keypad.
Make sure your laptop’s external video port is active.
minute for the image to achieve full brightness.
? No start up screen? Get help on page 19.
to learn your laptop’s key combination.
pad. Get help on page 20.
Turn on your computer.
Remove the lens cap.
driver setup process.
toggle Power switch · turn on computer · remove lens cap




adjust zoom or focus
Avoid placing your hands in near the hot exhaust vent in front of the projec-
If the image is not square, adjust the keystone using the buttons on the key-
Adjust the height of the projector, if necessary, by pressing the release but-
Position the projector the desired distance from the screen at a 90 degree
Press the top Keystone button to reduce the upper part of the image, and
Rotate the leveling foot located at the rear of the projector, if necessary.
press the bottom Keystone button to reduce the lower part.
See page 43 for a table listing screen sizes and distances.
Adjust the Contrast or Brightness in the Picture menu.
See page 32 for help with these menu adjustments.
Adjust the zoom or focus.
ton to extend the foot.
angle to the screen.
pad.
tor.





The first time you connect a computer running Windows 98 to the projector,
locates the driver. If this driver has been removed, reload the driver using
If you are running Windows 2000 or Windows ME, skip these steps and go
New Hardware Wizard appears. Follow these instructions to use the Wiz-
d When Windows finds the driver, you are ready to install it. Click Next.
the computer recognizes the projector as “new hardware” and the Add
c Uncheck any checked boxes, then click Next. Windows automatically
ard to load the correct driver (which was installed with your Windows
b Make sure “Search for the best driver” is selected, then click Next.
a Click Next to begin searching for the driver.
your Windows operating system CD.
to “Adjusting the image” on page 11.
operating system).
a · b · d

appears again. Drivers must be installed to use the USB functionality.
The second time a USB Human Interface Device (for the keyboard).
The third time it detects a USB Human Interface Device (for the
For Windows 2000, Windows ME, and Windows XP:
The first time it detects a USB Composite Device.
For Windows 98:
mouse).

Do Not Use 4:3 mode
16:9 mode
4:3 screen 16:9 screen
digital cameras, video game consoles, HDTV receivers, and TV tuners to the
projector. There is also an audio input. You can connect the audio directly to
Before connecting your projector, you should decide which aspect ratio you
are 16:9. If you’re projecting onto a screen, the size/shape of the screen may
don’t have the screen size restriction. What you plan to project will also help
you choose between 4:3 and 16:9. Most regular TV shows are 4:3, while most
ples of tuners are digital cable boxes, VCRs, digital video recorders, and sat-
ellite TV boxes. Basically, any device that can change channels is considered
the projector to get sound from the built-in speaker, or you can connect the
Aspect ratio is the ratio of the image width to image height. TV screens are
anamorphic movies or HDTV, and Native for 4:3 content. If you have a 4:3
direct pixel mapping) for 4:3 content. Keep in mind that anamorphic mov-
You can connect the projector to most video devices that can output video.
You cannot directly connect the coaxial cable that enters your house from a
cable or satellite company, the signal must pass through a tuner first. Exam-
usually 4:3, which is the default for this projector. HDTV and most DVDs
answer this question for you. If you are projecting onto a blank wall, you
screen you should still use 16:9 for anamorphic movies or HDTV, but you
ies only appear correctly if the DVD player is set to output to a 16:9 televi-
You can connect video devices such as VCRs, DVD players, camcorders,
want to use. The projector’s Aspect Ratio setting is accessed through the
also have the option of using either 4:3 (to fill the screen) or Native (for
If a have a 16:9 screen then you should select an aspect ratio of 16:9 for
projector’s Menu. See page 32 for more information.
audio to your stereo system.
movies are 16:9.
a tuner.
sion.
Native · mode · only)



connect video cable and audio cable (via
connect S-video and audio cable (via
video-out connector on your video device. Plug the other yellow connector
into the yellow Video In connector on the projector. Plug the included audio
nector on the video device. Plug the included audio cable into the black con-
Keep in mind that video output from composite connections are not as high
video connector on the projector. Use the audio cable and the audio adapter
Plug the composite video cable’s (not included) yellow connector into the
adapter’s white connector into the left audio out connector on your video
device; plug the audio adapter’s red connector into the right audio out con-
nector on the audio adapter. Plug the other end of the audio cable into the
If your video device uses a round, four-prong S-video connector, plug an S-
video cable into the S-video connector on your video device and into the S-
Keep in mind that S-video delivers higher quality video output than com-
posite, but not as high quality video output as component.
blue Audio In connector on the projector.
quality as S-video or component.
as described above.
the audio adapter) · audio adapter)




connect component cables via component
to S-video adapter and audio cables via
via component to VESA adapter and
connect VGA cable and
audio cable via audio
If your video device has a 15-pin VGA output, plug one end of the included
computer cable to the VGA connector on your video source. This connector
Computer in (for VESA) connector. Use the audio adapter as described on
may be labeled “To Monitor” on the video source. Plug the other end of the
Connect the power cord to the Power connector on the side of the projector
party vendor) for HD and progressive sources. Plug the component cable
into the video device. Plug the other end of the component cable into the
adapter and plug the adapter into the projector’s S-video (for S-video) or
video adapter or a Component to VESA adapter (available from a third-
If your video device has component connectors, use a Component to S-
Component connection offers the highest quality video output.
Use the audio adapter as described on the previous page.
cable into the Computer In connector on the projector.
and to your electrical outlet.
the previous page.



turn on video device
The LED flashes green and the fans start to run. When the lamp comes on,
the start-up screen is displayed and the LED is steady green. It can take a
Adjust the height of the projector by pressing the release button to extend
Position the projector the desired distance from the screen at a 90 degree
Toggle the Power switch on the side of the projector to the On position.
The video device’s image should appear on the projection screen. If it
See page 43 for a table listing screen sizes and distances to the screen.
Rotate the leveling foot at the rear of the projector, if necessary.
minute for the image to achieve full brightness.
? No start up screen? Get help on page 20.
doesn’t, press the Video button on the keypad.
Plug in and turn on your video device.
? No image? Get help on page 23.
Displaying video
Remove the lens cap.
angle to the screen.
the foot.

(thin ring) (thick ring) zoom
adjust Picture menu options
adjust zoom and focus
If the image is not square, adjust the keystone using the buttons on the key-
pad. Press the top Keystone button to reduce the upper part of the image,
Adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture
For Aspect Ratio, keep in mind that DVD players must be configured for
16:9 in order to view the highest quality image. For more information regarding Aspect Ratio, see page 14.
menu. See page 32 for help with the menus and these adjustments.
and press the bottom Keystone button to reduce the lower part.
Adjust the volume on the keypad or remote.
Adjust the zoom and focus.

The following tables show common problems. In some cases, more than one
If your image appears correctly on the screen, skip to the next section. If it
The LED on top of the projector indicates the state of the projector and can
and the software has initialized or the pro-
replace the lamp and reset the lamp timer.
Contact Technical Support if the problem
sented. When the problem is solved, you can skip the additional solutions.
and the software is initializing, or the pro-
jector is powering down and the fans are
A fan or lamp failure has occurred. Make
page 25).Turn off the projector and wait
again. If the projector has been working
solid green The power switch has been toggled on
blinking green The power switch has been toggled on
one minute, then turn the projector on
possible solution is provided. Try the solutions in the order they are pre-
jector has been powered off via the
for 4,000 hours or more (page 38),
sure the vents aren’t blocked (see
running to cool the lamp.
Technical Support.
remote.
persists.
does not, troubleshoot the setup.
see page 43 for more information
help you troubleshoot.
You can turn the projector off simply by toggling the power switch to the off
LED is blinking green, the projector does not accept any keypad and remote
down to minimal speed. To turn off the projector, toggle the power switch to
erly cool. However, if the remote was used to power the projector to the Off
The projector automatically displays a black screen after no active source is
detected for 30 minutes. This black screen helps preserve the life of the pro-
You can make the black screen appear after a preset number of minutes by
the projector is performed for 20 minutes. By default, this feature is off. See
Off state while it is running. When the Power button is pressed twice (once
to start the power-down process and a second time to verify that you want
to power the projector off), the lamp turns off and the LED blinks green for
minute before turning the projector on again. This allows the lamp to prop-
jector. The image returns when an active source is detected or a remote or
lamp off after no active sources are detected and no user interaction with
You can also press the remote’s Power button to place the projector in the
one (1) minute while the fans continue to run to cool the lamp. While the
The projector also has a Power Save feature that automatically turns the
When the lamp has cooled, the LED lights solid green and the fans slow
turning on the Screen Save feature in the Settings>System menu. See
state you do not need to wait one minute to turn it on again.
keypad button is pressed.
the off position.
Power Save
control input.
page 35.
page 35.
position.
LED color/behavior Meaning · blinking red


no start up screen plug power cord in projector’s left side
only start up screen appears press the Computer button
Problem Solution Result

range” press the Auto Image button on keypad computer image projected
resolution on your computer, as shown
in the following problem, “image fuzzy
adjust computer refresh rate in Control
you may also need to set a different
(location varies by operating system)

no computer image, just the words “Signal out of


image not centered on screen move projector, adjust zoom, adjust height correct image

image fuzzy or cropped set your computer’s display resolution to

Picture>Advanced menu correct image
Picture>Aspect ratio menu correct image
image not square adjust Keystone on keypad square image
image not sharp adjust Sharpness (video sources only) in the
image does not fit 4:3 or 16:9 screen change aspect ratio to 4:3 or 16:9 in


Problem Solution Result

A B
A B
image upside down turn off ceiling in Settings>System menu correct image
image reversed left to right turn off rear in Settings>System menu correct image
brightness, contrast in the menus correct image
projected colors don’t match source adjust color, tint, color temperature,
A B
A
Problem Solution Result



projector and allow it to cool for a minute lamp turns on

lamp won’t turn on, LED blinking red make sure vents aren’t blocked, turn off the
won’t turn on and LED blinking red if lamp hours > 4,000, lamp must be
“Change lamp” message appears at startup or lamp
LED

extended warranty plan may be purchased from your dealer. When sending
your projector in for repair, we recommend shipping the unit in its original
1-800-799-9911. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North America after hours and
packing material, or having a professional packaging company pack the
This product is backed by a limited two-year warranty (page 47). An
In Europe, call InFocus in The Netherlands at +31 (0) 20 579 2820.
If you need assistance, call InFocus Customer Service directly at
unit for shipping. Please insure your shipment for its full value.
In Asia, call InFocus in Singapore at (65) 6334-9005.
Or, send us an e-mail at techsupport@infocus.com.
weekends for a fee at 1-888-592-6800.

cable is connected. If using a USB cable, make sure the correct drivers
the computer, and are within the remote range of 15 feet (4.5m). For

best results, point the remote at the screen.
are installed.
not dead.
color is displayed, see page 36); use the Effect button to invoke a user-defin-
Previous and Next buttons allow you to navigate through your PowerPoint
computer cable to your computer to use these buttons. When you do this for
The remote uses two (2) provided AAA batteries. They are easily installed
remote. When disposing of the batteries, be sure to do so in an environmen-
To operate, point the remote at the projection screen or at the projector (not
switch is in the Off position does not cause the projector to power up. You
need to put the projector’s Power toggle switch in the On position to let the
When the projector is running, you can press the remote’s Power button to
Press the remote’s Menu button to open the projector’s menu system. Use
the arrow buttons to navigate, and the Select button to select features and
Two presentation-specific features are also provided. Use the Blank button
to display a blank screen instead of the current slide (you can choose which
presentation while in Slide Show mode. Connect the USB connector on the
the first time, the Add New Hardware wizard may appear. See page 13 for
by sliding the cover off the remote’s back, aligning the + and - ends of the
than the type provided with the projector may risk severe damage to the
at the computer). The range of optimum operation is about 15 feet (4.5m).
The remote also has Volume and Mute buttons to control the sound, and
able action, such as freeze, zoom or change your aspect ratio for viewing
Pressing the remote’s Power button when the projector’s Power toggle
place the projector in the Off state (see page 19 for shutdown info) and
adjust values in the menus. See page 31 for more info on the menus.
batteries, sliding them into place, and then replacing the cover.
Video and Computer buttons to switch between sources.
DVDs (see page 36 to learn to program this button).
details on loading the correct USB drivers.
remote power on the projector.
tally proper manner.
power it off.
Troubleshooting the remote


To use the projector’s speaker, connect your source to the Audio In connec-
Up/Down arrows–navigates to and adjusts settings in the menus (page 31).
To adjust the volume, press the Volume buttons on the keypad or remote.
Most buttons are described in detail in other sections, but here is an over-
tor on the projector. See page 15 regarding using the audio adapter.
Presets–cycles through the available preset settings (page 33).
To mute the sound, press the Mute button on the remote.
Select–confirms choices made in the menus (page 31).
If you aren’t hearing the audio, check the following:
Keystone–adjusts squareness of the image (page 11).
Video and Computer–changes the active source.
Auto Image–resets the projector to the source.
Menu–opens the on-screen menus (page 31).
Volume–adjusts sound (page 28).
on the keypad or remote.
view of their functions:

Several features are provided to make giving presentations easier. Here is an
Mute, Aspect Ratio, Source, Auto Image, Freeze, Zoom, and About. See
page 36 for details. The freeze effect allows you to freeze the displayed
instead of the active source. You can determine the color of this screen
cally shut down the projector after several minutes of inactivity or dis-
about the projector and current source. You can select among Blank,
image. This is useful if you want to make changes on your computer
the button. The default effect is About, which displays information
without your audience seeing them. The mask effect allows you to
play a black screen. This helps preserve lamp life (page 35).
cover part of the image with a black curtain.
overview, details are found in the menu section.
blank or default screen (page 36).
(page 36).
After your computer is connected properly and the computer’s image is on
the screen, you can optimize the image using the onscreen menus. For gen-
save the settings using Presets. This allows you to quickly recall these
eral information on using the menus, see page 31.
Advanced menu (page 34).
settings later (page 33).
source (page 32).
(page 32).

You can customize the projector for your specific setup and needs. See
page 35 to page 37 for details on these features.
tings>System menu.
power-up.
screen, you can optimize the image using the onscreen menus. For general
button. The default effect is About, which displays information about
the projector and current source. You can select among Blank, Mute,
After your video device is connected properly and the image is on the
Aspect Ratio, Source, Auto Image, Freeze, Zoom, and About. See
information on using the menus, see page 31.
page 36 for details.
source (page 32).
menu (page 32).

keypad navigation Main menu



tons, or turn the feature on or off using check boxes. Press Select to confirm
Certain menu items may not be visible or may be grayed depending upon a
particular source being connected. For example, Sharpness is only available
for video sources and is not visible when a computer source is active. Menu
options are grayed out only if the source if selected but no signal is present.
For example, if the projector is set to a video source but the source, such as a
menus automatically close after 60 seconds if no buttons are pressed.) The
Main menu appears. Use the arrow buttons to move up and down to high-
level, ranging from one (the Main menu) to four (the most nested menus).
To open the menus, press the Menu button on the keypad or remote. (The
down arrow buttons to adjust the value, select an option using radio but-
adjustments are complete, navigate to Exit, then press Select to go to the
Dots appears before the menu name. The number of dots indicate menu’s
To change a menu setting, highlight it, press Select, then use the up and
your changes. Use the arrows to navigate to another setting. When your
previous menu; press the Menu button at any time to close the menus.
DVD player, is turned off video menu options are grayed out.
light the desired submenu, then press the Select button.
The menus are grouped by usage:
projector and source.
changed often.

increasing keystone decreasing keystone

To adjust the following settings, highlight the setting, press Select, use the
up and down arrows to adjust the values, then press Select to confirm the
Color: adjusts a video image from black and white to fully saturated color.
Aspect Ratio: Aspect ratio is the ratio of the image width to image height.
Select Native to see the unmodified input with no resizing by the projector.
TV screens are usually 4:3. HDTV and most DVDs are 16:9. The default is
parts of the picture and changes the amount of black and white in the
images. The tint setting applies to NTSC video sources only.
For more information regarding Aspect Ratio, see page 14.
Select 16:9 to watch enhanced widescreen DVDs.
Brightness: changes the intensity of the image.
The color setting applies to video sources only.
also adjust keystone from the keypad.
changes.
image.
4:3.
Aspect ratio · Picture menu


tomize the settings for each source. The settings you customize are saved in
computer presentations, photographs, film images, and video images. Film
input is material originally captured on a video camera, like a TV show or
sporting event. You can use the preset as a starting point, then further cus-
the preset for each source. To restore the factory default settings, choose Fac-
adjust the image, select Save User in the Presets menu, then select Yes. You
input is material originally captured on a film camera, like a movie; video
There is also a user-definable preset. To set a preset for the current source,
can recall these settings in the future by selecting the User 1 preset.
tory Reset in the Settings>Service menu (page 37).




video standard options may vary depending on your region of the world.) If
look right or the image may appear “torn.” If this happens, manually select
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
cally pick the video standard based on the input signal it receives. (The
the projector is unable to detect the correct standard, the colors may not
Overscan: (video sources only) removes noise around the video image.
Horizontal/Vertical Position: adjusts the position of a computer source.
The following four (4) options are for computer sources only.
Phase: adjusts the horizontal phase of a computer source.
Tracking: adjusts the vertical scan of a computer source.
image. Select a sharpness setting.
tive warmth value.
and blue colors.
dard menu.





first for active video during power-up. When the Autosource feature is On,
“Mute”) in the lower-left corner of the screen. NND prevents your notebook
the projector powers down, the image will be displayed. When Power Save
screen with a black color after no signals are detected for a preset number of
minutes. The image returns when an active source is detected or a remote or
the projector automatically finds the active source, checking the Power-up
Source first. The options are Computer 1 for a computer source, and Video
1 (for S-video connections), and Video 2 (for composite video connections) for video sources. When this feature is Off, the projector defaults to the
cent screen. Ceiling turns the image upside down for ceiling-mounted pro-
jection. Display Messages displays status messages (such as “Searching” or
computer from going into Screen Save mode if the USB cable is connected.
for 20 minutes. After an additional 10 minutes with no signal, the projector
source selected in Power-up Source. To display another source, you must
Power Save automatically turns the lamp off after no signals are detected
powers down and can be toggled off. If an active signal is received before
is enabled, Screen Save is disabled. Screen Save automatically blanks the
manually select one by pressing the Computer or Video button on the
can also be made from the projector’s keypad and the remote.
keypad button is pressed.
remote or keypad.


the remote, allowing you to quickly and easily use the effect. Highlight an
works if you purchase an optional remote control with mouse buttons
Press the Effect button to cancel zoom and return to normal magnifica-
zoomed. Press the right mouse button to decrease the magnification.
page 32). Set as the Effect Key, it can allow you to switch the Aspect
and cursor control. Press Effect, then press the left mouse button to
zoom the image. Use the cursor control to pan the image while it is
screen at startup, and when no source is detected.
effect and press Select to choose a different one.
Blank button on the remote.
Ratio for DVDs.
information.
tion.
Blank Screen · Startup Logo · Effect Key



Showing the About box is the default action assigned to the Effect button.
About: provides information about the projector and the active source.
Language: allows you to select a language for the onscreen display.
Service: To use these features, highlight them and press Select.
Service Code: only used by authorized service personnel.
Factory Reset: restores all settings to their default.
zero. Do this only after changing the lamp.
About menu · Language menu · Service menu


2 Lightly wipe the cleaning cloth over the lens in a circular motion. If you don’t intend to use the projector immediately, replace the lens cap.
“Optional Accessories” on page 42 for the part number) with the same type
3 Turn the projector on its side so that the lamp door is facing you. Using a flat-blade screwdriver, gently pry the lamp door from the projector by
placing the screwdriver blade into the space between the top of the lamp
The lamp hours used timer in the About menu counts the number of hours
appears on the screen at startup. If the maximum lamp time of 4,000 hours
the lamp has been in use. After 3,980 hours, the message “Change lamp”
is exceeded, the lamp will not light. In this case, after replacing the lamp
you must reset the lamp hours by simultaneously pressing both Volume
ries” on page 41 for information. Use only a replacement lamp (see
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
2 Wait 30 minutes to allow the projector to cool thoroughly.
buttons on the keypad and holding them for 10 seconds.
1 Turn off the projector and unplug the power cord.
chemicals might scratch the lens.
and rating as the original lamp.
door and the projector.
Maintenance
wait 30 minutes · Lamp hours used · lamp door

10 Plug in the power cord and toggle the Power switch to turn the projector back on.
4 Loosen the two captive screws that attach the lamp housing to the pro- jector.
5 Detach the lamp connector from the projector by depressing the locking tab on the connector and lightly pulling it free.
6 Carefully remove the lamp housing. Dispose of the lamp in an environ- mentally proper manner.
8 Re-attach the lamp connector to the projector. The locking tab should engage when the connector is fully plugged in.
11 To reset the lamp hour timer, navigate to the Settings>Service menu and select Lamp Reset. See page 37 for details.
unlikely event that the bulb ruptures, small glass fragments may be
To avoid burns, allow the projector to cool for at least 30 minutes
Do not drop the lamp housing or touch the glass bulb! The glass
Be extremely careful when removing the lamp housing. In the
generated. The lamp housing is designed to contain these frag-
ments, but use caution when removing the lamp housing.
7 Install the new lamp housing and tighten the screws.
may shatter and cause injury.
before you replace the lamp.
9 Replace the lamp door.

In dirty or dusty environments, the two dust filter screens in the lamp hous-
lamp operating temperature and prolongs lamp life. To maximize lamp life
2 Examine the dust filter screens on the lamp housing. If necessary, use a vacuum cleaner set on low power to clean the screens. Be careful not to
Refer to the information that came with the lock for instructions on how to
ing can become clogged, causing high temperatures and premature lamp
failure. Routine maintenance to remove dust from the screens lowers the
System. See “Optional Accessories” on page 42 for ordering information.
The projector has a security lock for use with a PC Guardian Cable Lock
disturb any internal components when cleaning the screens.
you should clean the screen every 250 hours.
3 Replace the lamp housing and lamp door.
1 Remove the lamp housing.
use it.

(ship with the projector) Part Number
(included in projector) SP-LAMP-009
Color-coded Cable Ties, 3 set SP-CABLETIES
Shipping Box (with packaging) 110-0551-xx
Soft Carrying Case 110-0580-xx
Computer Cable 6 ft (1.8 m) 210-0175-xx
Audio Cable 6 ft (1.8 m) 210-0118-xx
RCA to 3.5mm Audio Adapter 210-0177-xx
S-video Cable 13 ft (4 m) 210-0125-10
Power Cable (country-dependent) 210-0023-xx
Remote and Batteries 590-0678-xx
Quick Setup Card 009-0655-02
Accessories
Humidity Operating 10% to 95% relative humidity, non-condensing Non-operating 10% to 90% relative humidity, non-condensing
Ceiling Mount UL tested/listed ceiling mount with minimum capacity of
Dimensions 12.5 x 9.8 x 4.49” (318 x 249 x 114 mm)
Operating 50 to 104° F (10 to 40° C) at sea level 50 to 95° F (10 to 35° C) at 10,000 feet Non-operating -4 to 140° F (-20 to 60° C)
Input Power Requirements 100-120/200-240 3/2A 50/60Hz
Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters)
Optics Focus Range 4.9 - 32.8 feet (1.5 - 10 m)
Weight 6.8 lbs. (3.1 kg) unpacked
Lamp type 150 - W DC SHP lamp
Appendix
34 lbs (15.5 kg)

Sales at 1-800-660-0024 or visiting our website at www.infocus.com/acces-
sories. For general product information, please call 1-800-294-6400. Optional Accessories Part Number
Full-Feature Remote with Laser HW-CONDUCTOR
PocketPoint RF Presentation Remote HW-RF-POCKTPNT
Component to S-video Adapter SP-SVIDEO-ADPT
50’ VGA Extension bundle SP-VGAEXT50-D
84” Diagonal Wall/Ceiling Mounted Screen HW-WALLSCR84
IR Presentation Remote HW-PRESENTER
50’ VGA Extension bundle International version SP-VGAEXT50-I
60” Diagonal Screen (portable) HW-DLXSCRN
Component to VESA Adapter SP-VESA-ADPT
Mounting Extension Arm SP-LTMT-EXTP
Replacement Lamp Housing SP-LAMP-009
Shipping Case (ATA approved) CA-ATA-014
False Ceiling Plate SP-LTMT-PLT
RCA Video Cable 210-0176-xx
Samsonite Deluxe Travel Case CASE-802
Projector Security Cable SP-LOCK
30’ A/V Cable SP-AV30
50” Diagonal Screen (portable) A650
Deluxe Carry Case for Laptop and Projec-
Projector Mount SP-CEIL-007B, · tor CA-C132

If the projector is not functioning properly and the LED is blinking red, con-
jector on again. If the lamp does not strike
repair if replacing the lamp does not solve
Five (5) blinks The projector is overheating. Check for a
attempts. Check the lamp and lamp door
Two (2) blinks The lamp counter hours have exceeded
Three (3) blinks The projector has shut down. Check to
see if the lamp door is open. If the lamp
and wait one minute, then toggle the pro-
after one minute, replace the lamp. Con-
tact Technical Support (see page 26) for
Four (4) blinks The fan has failed. Contact Technical Sup-
port (see page 26) for repair or replacing
the air vents does not solve the problem.
sult Table 3 to determine a possible cause. There are two-second pauses
door is closed, toggle off the projector
blocked air vent. Contact Technical Sup-
port (see page 26) for repair if clearing
between the blinking cycles. Visit www.infocus.com/service for more
lamp life hours. Replace the lamp and
One (1) blink The lamp won't strike after five (5)
installations for loose connections.
reset the lamp hours counter.
the problem.
the fan.
details on the red LED error codes.
Range of distance to the screen for a given screen size for the InFocus X1
40/1 32/0.8 5.8/1.8 4.8/1.5 50/1.3 40/1 7.8/2.4 6,5/2.0 60/1.5 48/1.2 8.8/2.7 7.5/2.3 100/2.5 80/2 14.6/4.5 12.4/3.8 150/3.8 120/3.1 22.6/6.9 19.03/5.8 200/5.1 160/4.1 30.5/9.3 25.2/7.7
Table 2:
image size calculator.




ranty if the Product has been damaged due to abuse, misuse, neglect, smoke
erly use the Product in the application for which said Product was intended.
This Limited Warranty excludes Product cleaning, repair, or replacement of
unusual Product wear and is not considered normal use under the terms of
OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFOCUS.
InFocus shall have no further obligation under the foregoing Limited War-
and excludes normal wear. The Lamp Product Limited Warranty excludes
Remanufactured Products and Software Products are exempt from the fore-
Product Limited Warranty or Software Product Limited Warranty for appli-
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLI-
exposure (cigarette or otherwise), accident, unusual physical or electrical
authorized agents, causes other than from ordinary use or failure to prop-
plastics due to cosmetic damage and damage as a result of normal wear.
The Accessory Product Limited Warranty covers the accessory item only
going Limited Warranty. Please refer to the appropriate Remanufactured
CABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR
EXTEND BEYOND THE DISCRITPTION ON THE FACE HEREOF AND
LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS
Product repair outside of the terms of the Limited Warranty will be on a
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
stress, unauthorized modifications (including use of an unauthorized
mount), tampering, alterations, or service other than by InFocus or its
time and materials basis. Prolonged Product "demonstration" causes
expected lamp degradation.
cable Warranty information.
MAY NOT APPLY TO YOU.
this Limited Warranty.
If the Product while subject to this Limited Warranty, is defective in material
equivalent or superior to new parts performance. Limited Warranty periods
Product purchase, the original installed lamp shall have a 90-day or 500
ITS PRODUCT. THIS WARRANTY EXTENDS ONLY TO PRODUCTS PUR-
Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Cor-
(hereinafter collectively or individually referred to as "Product" as appropri-
ate) purchased from InFocus, an InFocus distributor, or an InFocus reseller
will conform to InFocus' specifications and be free from defects in material
within the Limited Warranty period and to repair or replace defective parts
with new parts or, at the option of InFocus, serviceable used parts that are
CHASED FROM INFOCUS OR AN INFOCUS AUTHORIZED RESELLER.
or workmanship during the warranty period, then InFocus, at its option,
All exchanged parts and Products replaced under this Limited Warranty
will become property of InFocus. InFocus' sole obligation is to supply (or
poration ("InFocus") warrants that the Projector, Lamps and Accessories
below. InFocus does not warrant that the Product will meet the specific
replacement Lamps purchased at the time of Projector Product pur-
or workmanship for the respective Limited Warranty period provided
pay for) all labor necessary to repair the Product found to be defective
hours usage Limited Warranty Period, whichever comes first, and
chase will have a 500 hours usage Limited Warranty period.
requirements of the end-user customer.
will REPAIR or REPLACE the Product.
(2) years from date of purchase.
are as follows:
purchase.
Limited Warranty

No repair or replacement of Product or part thereof shall extend the Limited
NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF
workmanship shall only be effective for a period of ninety (90) days follow-
THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND
Limitation on Bringing Action - No action, regardless of form, arising out
Mandatory Arbitration - Any action, regardless of form, arising out of the
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITA-
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS
original purchase, to the manufacturer (Purchaser must bear all tax, duty
Warranty period as to the entire Product. Warranty on the repair part and
UNDER NO CIRCUMSTANCES SHALL INFOCUS BE LIABLE FOR SPE-
Governing Law - Any action, regardless of form, arising out of the agree-
YOU MAY ALSO HAVE OTHER RIGHTS, DEPENDING ON JURISDIC-
and freight), or the Purchaser must bear charges for the warranty repair.
ing the repair or replacement of that part or the remaining period of the
WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN
STATED FOR THE PRODUCTS IS A CONSIDERATION IN LIMITING
of the agreement to purchase the Product may be brought by purchaser
agreement to purchase the Product is subject to mandatory arbitration.
LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE
ment to purchase the Product is governed by Oregon law.
more than one year after the cause of action has accrued.
Product Limited Warranty whichever is greater.
INFOCUS' LIABILITY.
TION.
The Limited Warranty periods hereof commence on the date of purchase by
the end-user customer. These Limited Warranty provisions shall apply only
InFocus, a Return Material Authorization Number (RMA #) is required and
(iii) provides the dealer's name; and (iv) provides the model and serial num-
ranty repair Product, otherwise the Product must be returned to the place of
to the end-user purchaser (first person or entity that purchased a new Prod-
resale). SOME JURISDICTIONS MAY GRANT YOU CONSUMER RIGHTS
Any person exercising a claim under this Limited Warranty must establish
to the satisfaction of InFocus both the date of purchase and that the Product
During the Limited Warranty period, to exercise this Limited Warranty, the
For Warranty service, the purchaser will be advised to return or deliver the
defective Product freight and all fees prepaid, to an InFocus Service Center
must be clearly displayed on the outside of the shipping carton or a similar
Products returned for Warranty service must be accompanied by a written
ber of the Product. Upon request of InFocus Corporation or an authorized
uct for personal or business use and not for the purpose of distribution or
was purchased new. The sales receipt or invoice, showing the date of pur-
purchaser must first contact 1) InFocus, 2) a service facility authorized by
or to a service facility authorized by InFocus. When returning Product to
facility authorized by InFocus will return the repaired/replaced Product
repair center for InFocus, proof of legal import must accompany the war-
InFocus Customer Service - 1-800-799-9911 or techsupport@infocus.com
package affording an equal degree of protection. InFocus or the service
chase of the Product is the proof of the date of purchase.
To Be Eligible For Limited Warranty Coverage
InFocus or 3) the place of original purchase.
freight prepaid to the purchaser.
SUCH CONSUMER RIGHTS.
To Obtain Warranty Service
Limited Warranty Period


27700B SW Parkway Avenue Wilsonville, Oregon 97070-9215
238A Thomson Road #18-01/04 Novena Square
1077 XX Amsterdam The Netherlands
In Europe:
In Asia:
InFocus International BV · Strawinskylaan 585 · Singapore 307684
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| no start up screen | plug power cord in projector’s left side remove lens cap toggle power switch toggle power switch on side | p.21 | |
| image fuzzy or cropped A AA | set your computer’s display resolution to the native resolution of the projector (Start>Settings>Control Panel>Display>Settings tab) select 800x600 For a laptop, disable laptop monitor or turn-on dual- display mode | p.23 | |
| image not square | adjust Keystone on keypad | p.24 | |
| image not sharp A B | adjust Sharpness (video sources only) in the Picture>Advanced menu | p.24 | |
| image upside downB A | turn off ceiling in Settings>System menu | p.25 | |
| image reversed left to right A | turn off rear in Settings>System menu | p.25 | |
| lamp won’t turn on, LED blinking red LED | make sure vents aren’t blocked, turn off the projector and allow it to cool for a minute | p.26 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.