

USER’S
GUIDE

™

Copyright © 2001 by InFocus Corporation
Wilsonville, Oregon. All rights reserved.

FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi- cations. Operation of this equipment in a residential area is likely to cause harm- ful interference in which case the user will be required to correct the interference at his own expense.
Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Can- ada.
Safety Certifications UL, CUL, TÜV, NOM, IRAM, GOST R
EN 55022 Warning This is a Class A product. In a domestic environment it may cause radio interfer- ence, in which case the user may be required to take adequate measures.

Declaration of Conformity Manufacturer: InFocus Corporation 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Olympia 1, NL-1213 NS Hilversum, The Netherlands
We declare under our sole responsibility that the LP280 and LP290 projectors con- form to the following directives and norms:
EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024
EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: EN 60950: 1992 + A1 + A2 + A3 + A4: 1997
Australian Certification C-tick mark
Trademarks Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. InFocus and LP are trademarks or registered trademarks of InFocus Corporation.
May, 2001

Safety Instructions iii
Introduction 1 Image Resolution 1 Compatibility 2 Unpacking the Projector 2 Usage Guidelines 5 If You Need Assistance 5 Warranty 6
Setting up the Projector 7 Connecting a Computer 9 Connecting a Video Player 11 Powering up the Projector and Adjusting the Image 13 Turning Off the Projector 14
Using the Projector 15 Basic Image Adjustment 15 Adjusting the Projector 15 Using the Remote Control 17 Using the Keypad and Remote Buttons 18 Using the On-Screen Menus 21 Basic Menu 22 Setup menu 24
Maintenance & Troubleshooting 29 Cleaning the Lens 29 Cleaning the Dust Filters 29 Replacing the Projection Lamp 31 Replacing the Batteries in the Remote Control 32 Using the Security Lock 33 Troubleshooting 34

T a b l e o f C o n t e n t s
Appendix 39 Specifications 39 Accessories 40 Portable and Laptop Activation Chart 42 Using Video Mirroring with a PowerBook Computer 47 Projected Image Size 48

Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.
Safety Definitions: • Warning: Statements identify conditions or practices that could result in personal injury.
Safety Symbols:
An arrow pointing to the lamp door on the projector.
Safety Terms: • Warning: Don’t look directly into the lens when the projector is turned on.

S a f e t y I n s t r u c t i o n s

Do not place objects in this area in back of the projector
Customer Service If you need assistance, call InFocus Customer Service directly at 1-800-799-9911. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North America after hours and weekends for a fee at 1-888-592-6800.
Or, send us an e-mail at techsupport@infocus.com.
In Europe, call InFocus in The Netherlands at (31) 35-6474010.
In Asia, call InFocus in Singapore at (65) 353-9449.

The InFocus® LP280™ and LP290™ multimedia projectors are specifically designed for multipurpose use. They are easy to con- nect, easy to use, easy to transport, and easy to maintain. The LP280 has native SVGA 800x600 resolution, the LP290 has XGA 1024x768 resolution. The user interfaces of the two products are identical; information in this user’s guide applies to both prod- ucts.
LP280 The SVGA resolution of the LP280’s projected image is 800x600. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.
expands 640x480 images to
800x600.
LP290 The XGA resolution of the LP290’s projected image is 1024x768. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.
expands 640x480 and 800x600
images to 1024x768.

I n t r o d u c t i o n
The projector is compatible with a wide variety of computers and video devices, including:
The projector comes with the items shown in Figure 1. Check to make sure all are included. Contact your InFocus dealer imme- diately if anything is missing.
If you are experienced in setting up presentation systems, use the Quick Start card that was included in the shipping box. For com- plete details on connecting and operating the projector, refer to this User’s Guide. Electronic versions of this user’s guide in mul- tiple languages are available on the included CD and on our web- site at www.infocus.com
A registration card is included in the box. Register to receive product updates, announcements, and special offers from InFocus. Or, register online at www.infocus.com/service/register and you will be automatically entered to win free merchandise.


*additional country-dependant power cords may be included
Shipping box contents

I n t r o d u c t i o n

Front view of projector
dust filters adjustable foot

security lock power cord connector
Rear view of projector
keypad · foot release

The first place to look for help is in this manual. Be sure to check the guidelines in “Troubleshooting” on page 34. Or, check the Service and Support section of our website at http://www.infocus.com/service You’ll find a Technical Library, FAQs, and support contacts including a technical support e-mail form.
If those sources don’t answer your question, call your InFocus dealer. You can also call InFocus Customer Service directly at 1-800-799-9911. Call between 6 a.m. and 6 p.m. PST, Monday through Friday. Service is available in North America after hours and on weekends for a fee at 1-888-592-6800.
In Europe, call InFocus in The Netherlands at (31) 35-6474010. In Asia, call InFocus in Singapore at (65) 353-9449.
Or, send us an e-mail at techsupport@infocus.com
Our World Wide Web address is http://www.infocus.com.

I n t r o d u c t i o n
This product is backed by a limited two-year warranty. The details of the warranty are printed at the back of this manual. An extended warranty plan may be purchased from your InFocus dealer, any time during the original two year warranty period. Refer to page 41 for the part number.
When sending your projector in for repair, InFocus recommends shipping the unit in its original packing material, or having a pro- fessional packaging company pack the unit for shipping. Do not ship your projector in the enclosed soft case. Please insure your shipment for its full value.

1 Place the projector on a flat surface.
2 Position the projector the desired distance from the screen.
least 3.6 feet (1 m) from the pro-
jection screen.

Projected image size at minimum zoom
3 Make sure the projector and the computer are turned off.

S e t t i n g u p t h e P r o j e c t o r
make sure the projector and all
other equipment is turned off. If
you’re connecting a computer,
computer USB mouse PS/2 mouse computer S-video video audio in monitor
make sure the distance between it
and the projector is 6 feet or less.
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector. See “Optional
Accessories” on page 41.
Connector panel

1 Plug one end of the computer cable into the blue “Computer VGA” connector on the projector.
2 Plug the other end of the computer cable into the monitor con- nector on your computer. If you are using a desktop computer, you need to disconnect your monitor cable from your com- puter.
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
S-Video Video Computer VGA Monitor VGA Audio in PS2/RS-232 USB
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 42 and in the
Service section of our website.
Connecting the projector to a computer
Do you want to play your computer’s audio on the projector?
1 Plug either end of the audio cable (ordered separately) into the audio connector on your computer.
2 Plug the other end of the audio cable into the “Audio in” con- nector on the projector.
Do you want to display the image on your desktop computer’s moni- tor as well as on the projection screen?
1 Plug the monitor’s cable into the “Monitor VGA” connector on the projector.
computer cable

S e t t i n g u p t h e P r o j e c t o r
Do you want to control the computer’s mouse from the projector’s remote? If your computer has a PS/2 connector, use the PS/2 mouse cable.
1 Plug the green end of the PS/2 mouse cable into the mouse connector on your computer.
2 Plug the black end of the PS/2 mouse cable into the “PS2/RS-232” connector on the projector.
If your computer has a USB connector and is running Windows 98, use the USB mouse cable.
1 Plug the flat end of the USB mouse cable into the mouse con- nector on your computer.
supported for use with
2 Plug the square end of the USB mouse cable into the “USB” connector on the projector.
Windows 98 or higher only.
You must have the appropriate USB drivers installed on your computer to use the USB feature. Windows 98 ships with the appropriate drivers.
Now you’re ready to power up the projector and your computer. Skip to “Powering up the Projector” on page 13.
your computer after connecting a
USB mouse to use it (it is hot-
pluggable). You must restart your
computer after plugging in a PS-2
mouse.

If your video device (VCR, DVD player, video camera) uses a round, one-prong composite video connector, use the composite audio/video (A/V) cable provided. The end with 2 connectors attaches to the projector, the other end attaches to the video device.
1 Plug the A/V cable’s round yellow connector into the “video- out” connector on your video device (Figure 7). This connec- tor may be labeled “To Monitor.”
2 Plug the other yellow connector into the “Video” connector on the projector.
S-Video Video Computer VGA Monitor VGA Audio in PS2/RS-232 USB
Connecting the projector to a VCR using the A/V cable
A/V cable

S e t t i n g u p t h e P r o j e c t o r
3 Plug the A/V cable’s white connector into the left “audio out” connector on your video device. Plug the cable’s red connec- tor into the right “audio out” connector on the video device.
4 Plug the blue end of the A/V cable into the “Audio in” con- nector on the projector.
The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically adjusts to optimize its performance for the incoming video.
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.

1 Remove the lens cap.
2 Plug the power cord into the back of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended.
that shipped with the projector.
3 After the LED lights orange, press the Power button on the projector’s keypad or remote.
your computer to the projector, the
computer may display a message
4 If you connected a video player, turn it on.
stating that new hardware was
found. The Add New Hardware
Wizard may appear. Use the Wiz-
ard to load the correct driver (the
computer considers the projector a
5 If you connected a computer, turn it on.
Plug and Play Monitor).
the order in which you power up
the equipment is very important.
Most computers should be turned
on last, after all other peripherals
have been turned on. Refer to your
determine the correct order.
computer’s documentation to

S e t t i n g u p t h e P r o j e c t o r
To turn off the projector, press the Power button. A dialog box appears, asking for confirmation. Press the Power button again to turn the lamp off. The fans continue to run for a minute, then the projector shuts off.
If you want to turn the lamp back on, you must allow 90 seconds for the lamp to cool. The lamp won’t light if it’s too hot.
If you want to turn off the projector for a short period of time, press the Power button twice. This puts the projector in standby mode. The lamp goes out, and the fans run and the LED blinks orange for 1 minute. After 1 minute, the fans turn off and the LED lights solid orange. To exit standby mode and return to normal operation, press the Power button.
allow the projector to run for at
least five minutes before turning
it off.

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.
1 Make sure you have powered up your equipment in the right order (page 13).
2 If the image doesn’t display completely, zoom the image (page 15), adjust the height of the projector (page 16) or center the image by adjusting its horizontal or vertical position (page 24). Be sure the projector lens is at a 90 degree angle to the screen.
3 If the image is out of focus, rotate the focus ring (page 15).
4 If the colors don’t look right, adjust the brightness, contrast, tint, or color (page 22).
To focus the image, rotate the focus ring (Figure 8) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size.

Focus ring and zoom ring
zoom ring

U s i n g t h e P r o j e c t o r
The projector is equipped with a self-locking, quick-release feet and buttons.
To raise the projector:
1 Raise the projector to the height you want, then press and hold the foot release buttons. Release the buttons to lock the feet into position (Figure 9).
2 If necessary, rotate the feet to adjust the angle of the projected image.

Adjusting the height of the projector

To control the computer’s mouse from the projector’s remote, you must connect the USB or PS/2 mouse cables to the computer and the projector. See page 10 for details.
Point the remote control at the projection screen or at the front or rear of the projector (not at the computer). The range for opti- mum operation is about 40 feet. If you point the remote at the projection screen, the distance to the screen and back to the pro- jector must be less than or equal to 40 feet. For best results, point the remote directly at the projector.

U s i n g t h e P r o j e c t o r
While the menus are displayed, the Keystone and Volume buttons on the keypad and the arrow buttons on the remote act as menu navigation and adjustment buttons and the Source/Select button on the keypad and the Select button on the remote act as selection buttons. See “Using the On-Screen Menus” on page 21 for details.

Keypad and remote buttons
Menu Press the Menu button to open the on-screen menus. Press Menu again to close the menus. When you close the menus, the projec- tor saves any changes you made. The menu automatically closes after 1 minute if no buttons are pressed. For more information about the on-screen menus, see page 21.
Source/Select (keypad only) or Computer and Video (remote only) When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the Source/Select button on the keypad or the Computer or Video but- ton on the remote.
Power Press this button to turn the projector on and off.
LEDs

Volume Press the Volume buttons to adjust the volume.
Arrow buttons Use these buttons to navigate through and make adjustments to the on-screen menus. See “Using the On-Screen Menus” on page 21 for details.
Keystone Use this feature to adjust the image vertically and make a squarer image.
1 Press the Keystone up arrow to reduce the upper part of the image, and press the Keystone down arrow to reduce the lower part. You can also adjust keystone from the Basic menu (see page 23 for details on the menu).
increasing keystone decreasing keystone
Adjusting the keystone

U s i n g t h e P r o j e c t o r
Black (remote only) Press this button to display a black screen.
Effect (remote only) Press this button to invoke the presentation effect. The default effect is magnify. You can select among freeze, black, mute, and 16:9. See page 26 for details.
To use the magnify effect, press Effect, then press the up or right arrow to magnify the image, press the down or left arrows to decrease the magnification. If you press Effect again, you can use the arrows to pan the image, displaying different parts of it (only if the image is magnified). To return to magnify mode, press the Select (or L) button. To return to the original size, press the Effect button twice.
Contrast (remote only) Press the Contrast up and down arrows to adjust the contrast from 0-100.
Brightness (remote only) Press the Brightness up and down arrows to adjust the Brightness from 0-100.

The projector has menus that allow you to make image adjust- ments and change a variety of settings.
To open the on-screen menus, press the Menu button on the keypad or remote. This displays the Basic menu and changes the Keystone and Volume buttons on the keypad to menu navigation buttons. Press the down arrow button to move the cursor down and press the up arrow button to move the cursor up. The selected menu is highlighted.
grayed out (dimmed) at certain
times. This indicates the item is
not applicable to your setup or the
item is not enabled until another

selection is made.
To change a menu setting, use the up and down arrow buttons to move the cursor up and down to the item you want to change (the selected item is highlighted), then press the Source/Select button on the keypad or the Select button on the remote. Use the left and right arrows to adjust the setting, or use the up and down arrows and the Select button to turn a setting on or off. Press Source/Select when you are done.
To access a sub-menu, highlight it and press Source/Select. To navigate back to the previous menu, highlight the arrow at the top of the menu and press Source/Select.
Press the up and down arrows to move to another setting. When you have completed your adjustments, press Menu to close the menus.
On-screen menu

U s i n g t h e P r o j e c t o r
Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.
1 Use the up and down arrows to highlight Contrast, press Source/Select, use the left and right arrows to adjust the con- trast from 0 to 100 in the slider bar, then press Source/Select to accept your changes.
Brightness Adjusting the brightness changes the intensity of the image.
1 Use the up and down arrows to highlight Brightness, press Source/Select, use the left and right arrows to adjust the brightness from 0 to 100 in the slider bar, then press Source/ Select to accept your changes.
Color The color setting adjusts a video image from black and white to fully saturated color.
to video sources only.
1 Use the up and down arrows to highlight Color, press Source/Select, use the left and right arrows to adjust the color from 0 to 100 in the slider bar, then press Source/Select to accept your changes.
Basic menu

Keystone This option helps to keep the image square as the angle of projec- tion is changed. Use this feature to adjust the image vertically and make a squarer image. See page 19 for details on keystone adjustments.
1 Press the down button to highlight Keystone, then press Source/Select. Use the left and right arrows to adjust the key- stone setting from -63 to 63 in the slider bar. Press Source/Select to accept your changes.
Setup See the following pages for details on this menu.
Reset This resets the picutre settings like brightness and contrast.
About This read-only menu provides information about the source, such as resolution and horizontal and vertical frequencies.

U s i n g t h e P r o j e c t o r


Setup and Picture menus
Picture menu • Screen Aspect: The default is 4:3. Click 16:9 if you are watching videos in widescreen format. Highlight Screen Aspect, press Source/Select, use the up and down arrows to highlight your selection, press Source/Select, then press the left arrow to return to the Picture menu.

System menu Turn the features in the System menu on and off by highlighting them and pressing Source/Select. A checkmark in the box indi- cates the feature is on; an empty box means the feature is off.

System menu

U s i n g t h e P r o j e c t o r
Language menu You can display the on-screen menus in English, German, Span- ish, French, Italian, Dutch, Norwegian, Portuguese, Japanese, Chinese, or Simplified Chinese. Highlight the desired language, then press Source/Select. The menus redraw immediately.

Effect menu This menu allows you to assign a different effect to the Effect but- ton on the remote. The default effect is magnify. Highlight an effect and press Source/Select to choose a different one.

Language menu · Effect menu

Service menu · Service menu

U s i n g t h e P r o j e c t o r
Userlogo menu This menu allows you to display a blank blue or black screen instead of the default InFocus screen when no source is detected. Highlight the desired color, press Source/Select, then press the left arrow to return to the previous menu.
Userlogo menu

This section describes how to:
Follow these steps to clean the projection lens:
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
2 Lightly wipe the cleaning cloth over the lens in a circular motion.
3 If you don’t intend to use the projector immediately, replace the lens cap.
The dust filters catch dust and other particles in the air. If the fil- ters become clogged, the projector does not cool properly and may malfunction.
1 Turn off the projector and unplug the power cord.
2 Turn the projector upside down and remove the screws on the filter doors.

M a i n t e n a n c e & T r o u b l e s h o o t i n g

Removing the filter doors
3 Remove the filter doors and clean them using a vacuum cleaner on low power.
4 Replace the filter doors and tighten the screws.

Replacing the filter doors

The lamp hour timer in the Service Info menu counts the number of hours the lamp has been in use. When the timer reaches 2000 hours, the Alarm LED lights red, indicating that it is time to change the lamp. You can order new lamp housings from your InFocus dealer. See “Accessories” on page 40 for information.
allow the projector to cool for at
least 60 minutes before you
replace the lamp. Never extract
Follow these steps to replace the projection lamp:
the lamp housing while the projec-
1 Turn off the projector and unplug the power cord.
tor is operating.
2 Wait 60 minutes to allow the projector to cool thoroughly.
3 Loosen the three captive screws on the lamp housing.

when removing the lamp housing.
In the unlikely event that the bulb
ruptures, small glass fragments
may be generated. The lamp mod-
ule is designed to contain these
fragments, but use caution when
removing the lamp module.
Loosening the screws on the lamp housing
4 Carefully remove the lamp housing. Dispose of the lamp in an environmentally proper manner.

M a i n t e n a n c e & T r o u b l e s h o o t i n g

Removing the lamp housing
5 Install the new lamp housing and tighten the screws.
6 Plug in the power cord and press the Power button to turn the projector back on.
lamp module or touch the glass
7 To reset the lamp hour timer, navigate to the Setup/Service menu and choose Reset lamptimer. See page 27 for details on the Service menu.
bulb! The glass may shatter and
cause injury.
The life of the batteries depends on how often and how long you use the remote. Symptoms of low battery charge include erratic responses when using the remote and a reduced range of opera- tion.
Follow these steps to replace the batteries:
1 Turn the remote face down in your hand.
2 Push the release tab on the battery door toward the top of the remote and lift the door off.
3 Remove the old batteries and dispose of them in an environ- mentally proper manner.
4 Install two new AAA alkaline batteries. Make sure you install each in the correct direction.


Replacing the batteries in the remote
5 Slide the two tabs on the battery door into position, press the release tab and push the door into the remote to re-install the door.
The projector has a security connector for use with a PC Guardian Cable Lock System (Figure 26). See “Optional Accessories” on page 41 for ordering information. Refer to the information that came with the lock for instructions on how to use it to secure the projector.

Installing the security lock

M a i n t e n a n c e & T r o u b l e s h o o t i n g
LEDs The Alarm LED on top of the projector (Figure 11 on page 18) will alert you to certain problems.
The other LED on top of the projector indicates the normal oper- ating state of the projector.

If you’re using Windows 98:
1 Open “My Computer” icon, the Control Panel folder and then the Display icon.
2 Click the Settings tab.
3 Verify that the Desktop area is set to 1280x1024 or less.

M a i n t e n a n c e & T r o u b l e s h o o t i n g

The most current troubleshooting information can be found in the Service and Support section of our website at http://www.infocus.com/service You’ll also find a Technical Library, FAQs, and support contacts including a technical sup- port e-mail form.
Before calling your dealer or InFocus Technical Support for assis- tance, please have the following information available:
Call InFocus Technical Support at 1-800-799-9911 between 6 a.m. and 6 p.m. PST, Monday through Friday. Service is available in North America after hours and on weekends for a fee at 1-888-592-6800.
In Europe, call InFocus in The Netherlands at (31) 35-6474010 between 8 a.m. and 6 p.m. Central European Time.
In Asia, call (65) 353-9449 between 9 a.m. and 6 p.m.
Or, send us an e-mail at techsupport@infocus.com

M a i n t e n a n c e & T r o u b l e s h o o t i n g

Specifications
The projector must be operated and stored within the tempera- ture and humidity ranges specified.
Temperature Operating 41 to 95° F (5 to 35° C) at sea level 41 to 86° F (5 to 30° C) at 10,000 feet Non-operating -4 to 140° F (-20 to 60° C)
Altitude Operating 0 to 10,000 feet (3,048 meters) Non-operating 0 to 20,000 feet (6,096 meters)??
Humidity Operating 20% to 80% relative humidity, non-condensing Non-operating 10% to 90% relative humidity, non-condensing
Dimensions 3.3 x 8.5 x 11.2 inches (8.4 x 21.5 28.5 cm)
Weight 5.7 lbs. (2.6 kg) unpacked
Optics Focus Range 3.6 - 26.2 feet (1 - 7.8 m)
Lamp Type 132-watt UHP lamp
Input Power Requirements 100-240V~ 2-1A 50-60 Hz
Ceiling Mount UL tested/listed ceiling mount with minimum capacity of 22 lbs (10kg)

A p p e n d i x
Standard Accessories (ship with the projector) Part Number
Quick Start card 801967
Shipping Box (with packaging) 420071
Computer Cable 6 ft (1.8 m) 420017
Audio/Video Cable 6 ft (1.8 m) 420072
S-Video Cable 6 ft (1.8 m) 420075
PS/2 Mouse Cable 420066
USB Mouse Cable 420010
North American Power Cord (additional coun- try-dependant power cords may be included)
Projection Lamp Module (included in projector) SP-LAMP-LP2E
Online User’s Guide CD-ROM 802412
approved accessories. Other
products have not been tested with
the projector.

Shipping Case (ATA approved) CA-ATA-004
items by contacting your dealer or
Samsonite Travel Case CA-WHL-002
Deluxe Carry Case CA-C132
InFocus Catalog Sales at
Ceiling Mount Kit SP-CEIL-LMP2
1-800-660-0024.
GyroMouse RF Remote (US, Mexico, Canada, UK only)
Remote Point RF Remote with LaserPointer (US, Mexico, and Canada only)
Mind Path FX/2000 Remote Control F/X2000
Mind Path Gyropoint RF GYRO-RF
Mind Path Remote Control IR50F/X
Mind Path Pocket Point RF HW-RF-POCKTPNT
PC Guardian Projector Cable Lock SP-LOCK
15' VGA Extension Cable SP-VGA15
50' VGA Cable - Domestic SP-VGA50-D
50' VGA Cable - International SP-VGA50-I
VGA 1-in-2-out Distribution Amplifier HW-VGA2OUT
Portable Projector Stand, table 17"x25", holds up to 125 lb
Deluxe Wheeled Projector and Computer Cart HW-CART
40” Portable Projection Screen HW-PORTSCR40
50” Portable Projection Screen HW-PORTSCR50
60” Deluxe Insta-Theatre Screen HW-DLXSCRN
Pull Down Screen, 84” Diagonal HW-WALLSCR84
Replacement Projection Lamp Module SP-LAMP-LP2E
3rd Year Extended Warranty (1 year extension) EW-1YEAR
4th YearExtended Warranty (2 year extension) EW-2YEAR

A p p e n d i x
Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer’s documentation for the appro- priate command.) On many laptops, the activation function key
www.infocus.com for the most
current activation chart. It is
located in the Technical Library in
the Service and Support section.
is labeled with an icon, for example or the text CRT/LCD.
Key command to activate port
Key command to de-activate port
commands once activates the
external video port, pressing it
Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup)
again activates both the external
AST* ** FN-D or Ctrl-D FN-D or Ctrl-D
and internal ports, and pressing it
a third time activates the internal
type from A:/IVGA/CRT type from A:/IVGA/CRT
port. Refer to your computer’s
documentation for details on your
specific model.
AMT setup screen setup screen
FN-F3 FN-F6
setup VGA/ Conf.Simulscan
setup VGA/ Conf.Simulscan
F2/Choose Option/F5 F2/Choose Option/F5
Amrel* ** setup menu setup menu
Apple see Mac Portable and Mac PowerBook
BCC* automatic reboot computer

Key command to activate port
Key command to de-activate port
Bondwell LCD or CRT options after bootup
reboot for LCD or CRT options to appear
Chaplet** setup screen setup screen
FN-F4 FN-F4
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
mode/? (for setup option) mode/? (for setup option)
Compuadd* ** automatic automatic
Alt-F for screen setup option
Alt-F for screen setup option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
2 CRT/X at DOS prompt reboot
FN-F4 FN-F4
FN-F8 (CRT/LCD) FN-F8
FN-D FN-D
FN-F12 FN-F12
FN-F2 FN-F2
Dolch dip switch to CRT dip switch to LCD
Epson dip switch to CRT dip switch to LCD
Everex* setup screen option setup screen option

A p p e n d i x
Key command to activate port
Key command to de-activate port
Gateway FN-F3 FN-F1/FN-F1 again simul- taneous
Grid* ** FN-F2, choose auto or simultaneous
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM ThinkPad** reboot, enter setup menu FN-F2
FN-F7, select choice from setup menu
PS/2 SC select choice (CRT, LCD, etc.)
Kaypro boot up, monitor plugged in
Kris Tech FN-F8 FN-F8
Leading Edge FN-T FN-T
Mac Portable 100 no video port: not compatible
140, 145, 150, 170 no video port: requires a 3rd-party interface
160, 165, 180, 520, 540, 5300 Control Panel folder, Pow- erBook Display folder; Activate Video Mirroring
210, 230, 250, 270, 280, 2300 requires Apple Docking Station or Mini Dock

Key command to activate port
Key command to de-activate port
Micro Express* automatic warm reboot
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS prompt LCD at the DOS prompt
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo setup screen option setup screen option
Sharp dip switch to CRT dip switch to LCD
setup screen option setup screen option
setup screen option setup screen option
Top-Link* ** setup screen option setup screen option
Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home
setup screen option setup screen option

A p p e n d i x
Key command to activate port
Key command to de-activate port
Wyse software driven software driven
FN-F1 FN-F1
* These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached.
** These manufacturers offer more than one key command depend- ing on the computer model.

When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
1 Open the Monitors control panel; click on Monitor 2.
2 Set the number of colors you want.
3 Open the Control Strip, then click on the monitor icon.
4 Select “Turn Video Mirroring On.”
Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again.
When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps:
1 Turn off video mirroring.
2 Open the Monitors control panel.
3 Move the white menu bar to Monitor 2 to set the projector as the primary monitor.
4 Restart the PowerBook.
Using SimulScan Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook
To select SimulScan:
1 Open the Control Panel, then double-click Monitors and Sound.
2 In the Resolution list, choose the SimulScan mode, then click OK.
3 If this changes your display settings, a dialog box appears. Click OK to confirm the change.

A p p e n d i x
Diagonal Image Size (inches)
to help you determine projected
image sizes.
5 10 0 15 20 25 30
Distance to Screen (feet)
www.infocus.com for an interactive
image size calculator. It is located
in the Technical Library in the
Service and Support section.
(feet) 40 32 5.1 3.9 50 40 6.4 4.9 60 48 7.7 5.9 100 80 12.8 9.8 150 120 19.2 14.8 200 160 25.6 19.7




I n d e x

InFocus Corporation (“InFocus”) warrants that the InFocus-branded product (“Product”) purchased from InFocus or an InFocus reseller will conform to the manufacturers specifications and be free from defects in material or workmanship for the Warranty period provided below. InFocus does not warrant that the Prod- uct will meet the specific requirements of the end-user customer. The Warranty period commences on the date of purchase by the end-user customer. Said Limited Warranty shall apply only to the end-user purchaser (first person or entity that purchases a new Product for personal or business use and not for the purpose of distribution or resale). Any person exercising a claim under this Limited Warranty must establish to the sat- isfaction of InFocus both the date of purchase and that the Product was purchased new. The sales receipt, showing the date of purchase of the Product is the proof of the date of purchase.
From the date of such purchase, said Limited Warranty shall continue for a period of two (2) years for Projec- tor Products, for one (1) year for Accessory Products, and for ninety (90) days or 500 hours, whichever comes first, for Lamp Products (whether purchased in projectors or separately as replacements). During the War- ranty period for the Product, Replacement lamps, which are purchased at the time of projector purchase, will have a 90-day or 500 hour Warranty, whichever comes first, from the date the spare lamp is put into service.
At the sole option of InFocus, the Product will either be repaired or replaced. All exchanged parts and Prod- ucts replaced under this Warranty will become property of InFocus. InFocus’ sole obligation is to supply (or pay for) all labor necessary to repair the Product found to be defective within the Warranty period and to repair or replace defective parts with new parts or, at the option of InFocus, serviceable used parts that are equivalent or superior to new parts performance.
During the Warranty period, to exercise this Limited Warranty, the purchaser must first contact either InFo- cus, a service facility authorized by InFocus or the place of original purchase. For Warranty service, the pur- chaser will be advised to return or deliver the defective Product freight and all fees prepaid, to an InFocus Service Center or to a service facility authorized by InFocus. When returning Product to InFocus, a Return Material Authorization Number (RMA #) is required and must be clearly displayed on the outside of the shipping carton containing the Product. The Product is to be fully insured and packed in either its original carton or a similar package affording an equal degree of protection. InFocus or the service facility authorized by InFocus will return the repaired/replaced Product freight prepaid to the purchaser. Products returned for Warranty service must be accompanied by a written letter that: i.) explains the problem; ii) provides proof of date of purchase; iii) provides the dealer’s name; and iv.) provides the model and serial number of the Prod- uct. For Product purchased outside the United States, proof of legal importation must accompany the war- ranty repair Product, otherwise the Product must be returned to the place of original purchase, to the manufacturer (Purchaser must bear all tax, duty and freight), or the Purchaser must bear charges for the war- ranty repair.
No repair or replacement of Product or part thereof shall extend the Warranty period as to the entire Product. Warranty on the repaired part shall only be effective for a period of ninety (90) days following the repair or replacement of that part or the remaining period of the Product Warranty whichever is greater.

This Limited Warranty extends only to Products purchased from InFocus or an InFocus authorized reseller. InFocus shall have no further obligation under the foregoing Limited Warranty if the Product has been dam- aged due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifica- tions, tampering, alterations, or service other than by InFocus or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended.
Limited Warranty excludes Product or accessory cleaning repair or replacement of plastics due to cosmetic damage and damage as a result of normal wear. Product repair outside of the terms of the Limited Warranty will be on a time and materials basis. Prolonged Product “demonstration” causes unusual Product wear and is not considered normal use under the terms of this Limited Warranty.
Accessory Warranty covers the accessory item only and excludes normal wear. Lamp Product Warranty excludes expected lamp life degradation.
Remanufactured Products and Software Products are exempt from the foregoing Limited Warranty. Please refer to the appropriate Remanufactured Product Limited Warranty or Software Product Limited Warranty for applicable Warranty information.
DISCLAIMER OF UNSTATED WARRANTIES THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- CLAIMED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFOCUS. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY IT IS UNDERSTOOD AND AGREED THAT INFOCUS’ LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL INFOCUS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM- AGES OR LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PROD- UCT IS A CONSIDERATION IN LIMITING INFOCUS’ LIABILITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PUR- CHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Part Number 010-0284-00
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.