Instruction/ maintenance manual of the product IN8606HD InFocus
Go to page of 62
.
Copyright This publication, including all photographs, illust ra tions and software, is protected under international copyright laws, with all righ ts reserved. Neither this manu al, nor any of the material contained herein, may be reproduced without written consent of the author.
IN8606HD User’s Manual – ii – Important Safety Information Important: It is strongly recommended that you read this sect ion carefully b efore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector.
Preface Projector Installation Notice Place the projector in a horizontal p osition The tilt angle of the projector should not exceed 15 degrees. In addition, the projector sh ould not be installed in any other way except desktop and ceiling moun t positions.
IN8606HD User’s Manual Power Safety Only use the supplied power cord. Do not place anything on the powe r cord. Place the power cord wher e it will not be in the way of foot traffic. Remove the batteries from the remote control whe n storing or not in use for a prolonged period.
Preface – v – Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST .....................
IN8606HD User’s Manual – vi – SPECIFICATIONS ............................................................................................................................................................. 46 S PECIFICATIONS .......................
IN8606HD User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: DLP P ROJ ECTO R WITH L ENS C AP R EMOTE CONTROL.
IN8606HD User’s Manual Views of Projector Parts Front-right View 12 3 4 5 I TEM L ABEL D ESCRIP TION S EE PAGE 1. IR receiver Receive IR signal from remote co ntrol 2. Lens Projection Lens 3. Focus ring Focuses the projected image 4. Zoom ring Enlarges the projected ima ge 16 5.
IN8606HD User’s Manual Top view—On-screen Displa y (OSD) buttons and LEDs 3 1 2 I TEM L ABEL D ESCRIP TION S EE PAGE 1. Turns the projector O n and Off Red Lamp Failure 2. LAMP LED Blinking Red Erro r code Blue Projector is in standby or is fully powered on (lamp is lit).
IN8606HD User’s Manual Rear view 12 10 3 45 6 7 9 11 12 13 14 15 16 8 I TEM L ABEL D ESCRIPTION S EE PAGE 1. AC IN Connect a POWER cable 11 2. 3D SYNC Connect the 3D IR glasses transmitter (Note: For Specific 3D IR glasses only) 3. HDMI 1 Connect an HDMI cable from a HDMI device 4.
IN8606HD User’s Manual – 5 – DC12V Trigger Note: To use this feature, you must plug in t he connector before turn on/off the projector. Screen controllers are supplied and supported by screen manufacturers. Do not use this jack for any thing other than intended use.
IN8606HD User’s Manual Bottom view 100.0mm 146.0mm 68.7mm 75.0mm 175.0mm 173.9mm 40.8mm 4.5mm (6.89in ch) (3.94inch) (2.95inch) (0.18inch ) (5.75inch) ( 2.70inch ) (6.85inch) (1.61inch) I TEM L ABEL D ESCRIPTION S EE PAGE 1. Ceiling support holes Contact your dealer for information on m ounting the projector on a ceiling 2.
IN8606HD User’s Manual Remote Control Par ts 12 3 4 5 6 7 8 9 10 11 12 13 14 15 Important: 1. Avoid using the projector with bright fluore scent lighting turned on. Certain high-frequency fluorescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the pr ojector.
IN8606HD User’s Manual – 8 – I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Up Navigates up and changes setting s in the OSD 2. Enter Changes settings in the OSD 17 3. Power Turns the projector on or of f 11 4. Right Navigates to the right and changes settings in the OS D 5.
IN8606HD User’s Manual – 9 – Remote Control Operating Range The remote control uses infrared transmission to cont rol the projector. It is not necessary to point the remote directly at the projector.
IN8606HD User’s Manual – 10 – S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the direction of the arrow (A) . Pull out the cover (B) . 2. Insert the battery with the positive side facing up.
IN8606HD User’s Manual Turning the projector on and off 1. Connect the power cord to the projector. Connect the other end to a wall outlet. The POWER LED on the projector light. 2. Turn on the connected devices. 3. Ensure the POWER LED is not flashing.
IN8606HD User’s Manual 5. To turn the projector off, press the POWER button. When the “Power Off? Press Power again” message appears, press the POWER button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector.
IN8606HD User’s Manual Setting an Access Password (Secu rity Lock) You can use the four arrow buttons on the remote to set a password and prevent unauthorized use of the projector. When enabled, the password must be entered after you power on the projector.
IN8606HD User’s Manual 5. You can use the arrow buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but five characters must be used.. Press the arrow buttons in any order to set the password.
IN8606HD User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: The projector t able or stand should be level and sturdy . Position the projector so that it is perpendicular t o the screen. Ensure the cables are in a safe location.
IN8606HD User’s Manual Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom control (on the projector only) to resize the projected image and screen size . 2. Use the Image-focus control (on the projector only) to sharpen the projected image .
IN8606HD User’s Manual – 17 – O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote contro l arrow buttons to navigate and make changes to the OSD.
IN8606HD User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the ◄► buttons to navigate to Settings 1 . Press the ▲▼ buttons to move to the Advanced 1 menu. 2. Press (Enter) or ► to enter the Advanced 1 sub menu.
IN8606HD User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. – 19 –.
IN8606HD User’s Manual – 20 – Image Menu Attention ! When image options are changed, the Display Mode changes to User. Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Image Menu . Press the ▲▼ buttons to move up and down in the Image menu.
IN8606HD User’s Manual Computer Menu Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Image menu. Press the ▲▼ buttons to move to the Computer menu and then press (Enter) or ► . Press the ▲▼ buttons to move up and down in the Computer menu.
IN8606HD User’s Manual Advanced Features Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Image menu. Press the ▼▲ buttons to move to the Advanced menu and then press (Enter) or ► . Press the ▼▲ buttons to move up and down in the Advanced menu.
IN8606HD User’s Manual White Balance Press the (Enter) or ► button to enter the White Balance sub menu. Press ▼▲ to move up and down in the White Balance menu. I TEM D ESCRIP TION R Gain Press the ◄► buttons to adjust the Red Gain. G Gain Press the ◄► buttons to adjust the Green Gain.
IN8606HD User’s Manual Color Manager Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Image menu. Press the ▼▲ buttons to move to the Color Manager menu and then press (Enter) or ► . Press the ▼▲ buttons to move up and down in the Color Manager menu.
IN8606HD User’s Manual Settings 1 Menu Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 1 menu. Press the ▲▼ buttons to move up and down in the Settings 1 menu. Press the ◄► buttons to enter and change setting values.
IN8606HD User’s Manual Audio Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Settings 1 menu. Press the ▼▲ buttons to move to the Audio menu and then press (Enter) or ► . Press the ▼▲ buttons to move up and down in the Audio menu.
IN8606HD User’s Manual Advanced 1 Features Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Settings 1 menu. Press the ▲▼ buttons to move to the Advanced 1 menu and then press (Enter) or ► . Press the ▲▼ buttons to move up and down in the Advanced 1 menu.
IN8606HD User’s Manual 3D Setting I TEM D ESCRIPTION 3D Press the ◄► buttons to enter and select different 3D modes. 3D Sync Invert Press the ◄► buttons to enter and enable or disable 3D Sync Invert. 3D Format Press the ◄► buttons to enter and enable or disable different 3D Format.
IN8606HD User’s Manual Advanced 2 Features Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Settings 1 menu. Press the ▲▼ buttons to move to the Advanced 2 menu and then press (Enter) or ► . Press the ▲▼ buttons to move up and down in the Advanced 2 menu.
IN8606HD User’s Manual Settings 2 Menu Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 2 menu. Press the ▲▼ buttons to move up and down in the Settings 2 menu. I TEM D ESCR IPTION Auto Source Press the ◄► buttons to enter and enable or dis able automatic source detection.
IN8606HD User’s Manual Status Press the ▲▼ buttons to move up and down in the Settings 2 menu. Select the Status menu and press (Enter) or ► to enter. I TEM D ESCRIPTION Active Source Displays the current active sou rce type. Video Information Displays reso lution/video information for RGB sources and color standard for Video sources.
IN8606HD User’s Manual Advanced 1 Features Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Settings 2 menu. Press the ▲▼ buttons to move to the Advanced 1 menu and then press (Enter) or ► . Press the ▲▼ buttons to move up and down in the Advanced 1 menu.
IN8606HD User’s Manual Lamp Hour Reset Please refer to Resetting the on page 38 to reset the lamp hour counter. – 33 –.
IN8606HD User’s Manual Advanced 2 Features Press the Menu button to open the OSD menu. Press the ◄► buttons to mo ve to the Settings 2 menu. Press the ▲▼ buttons to move to the Advanced 2 menu and then press (Enter) or ► . Press the ▲▼ buttons to move up and down in the Advanced 2 menu.
IN8606HD User’s Manual Source Filter Press the ENTER button to enter the Source Filter sub menu. This sub menu allows you to enable and disable source inputs. I TEM D ESCRIPTION VGA Press the ◄► buttons to enter and enable or disable the VGA1 source.
IN8606HD User’s Manual – 36 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be r eplaced with a certified replacement part, which you can order from your local dealer.
IN8606HD User’s Manual 2. Remove the lamp compartment cover. 3. Remove the three screws from the lamp module. 4. Lift the module handle up. 5. Pull firmly on the module handle to remove the lamp module. 6. Reverse steps 1 to 5 to install the new lamp module.
IN8606HD User’s Manual Resetting the Lamp Timer After replacing the lamp, you should reset the la mp hour timer to zero. Refer to the following: 1. Press the MENU button to open the OSD menu. 2. Press the ◄► buttons to move to the Settings 2 menu.
IN8606HD User’s Manual – 39 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn.
IN8606HD User’s Manual Using the Cable Lock System and Security Bar Using the Cable Lock If you are concerned about security, attach the proj ector to a permanent obje ct with the Kensington slot and a security cable. Note: A Cable Lock System can be purchased from InFocus or your dealer.
IN8606HD User’s Manual – 41 – T ROUBLESHOOTING Common problems and solut ions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance.
IN8606HD User’s Manual – 42 – LED Error Messages E RROR C ODE M ES SAGES P OWER L ED B LUE L AMP L ED R ED System initialization Flashing OFF Ready to power on (Standby) ON OFF System powering u.
IN8606HD User’s Manual – 43 – Problem: The image is wider at the top or bottom (trapezoid effect) 1. Position the projector so it is as perpendicular to the screen as possible. 2. Use the Keystone button on the remote control to correct the p roblem.
IN8606HD User’s Manual – 44 – Audio Problems Problem: There is no sound 1. Adjus t the volume on the remote control. 2. Adjust the volume of the audio source. 3. Check the audio cable connection. 4. Test the source audio output with other speakers.
IN8606HD User’s Manual – 45 – HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cable s would be tested as Standard or High - Speed cables.
IN8606HD User’s Manual – 46 – S PECIFICATIONS Specifications Model IN8606HD Display type 0.65 DMD 1080P, DC3,S600 with DDP4422 ASIC Resolution 1080p 1920x1080 Projection distance 1.2 ~ 10 m ( 3.94ft ~ 32.8 1ft ) Projection screen size 25.9" ~ 324.
IN8606HD User’s Manual – 47 – Projection Distance vs. Projection Si ze Projection Distance and Size Table IN8606HD I MA GE D IAGONA L （ MM / INCH ） I MA GE W IDTH ( MM / INCH ) I MA GE H EIGHT ( MM / INCH ) P ROJECTION D ISTANCE （ MM / INCH ） F ROM P ROJECTION D ISTANCE （ MM / INCH ） TO O FFSET -A ( MM / INCH ) 1524 / 60 1328.
IN8606HD User’s Manual – 48 – Timing Mode Table S IGNAL R ESOLUTION H-S YNC ( KH Z ) V-S YNC ( H Z ) C OMPOSITE S_ VIDEO C OMPONENT RGB (A NALOG ) HDMI (D IGITAL ) NTSC － 15.734 60 ○ － － － PAL/SECAM － 15.625 50 ○ － － － 640 x 400 37.
IN8606HD User’s Manual – 49 – S IGNAL R ESOLUTION H-S YNC ( KH Z ) V-S YNC ( H Z ) C OMPOSITE S_ VIDEO C OMPONENT RGB (A NALOG ) HDMI (D IGITAL ) 1280 x 1024 91.1 85 － － ○ ○ 1280 x 960 60 60 － － ○ ○ 1280 x 960 85.9 85 － － ○ ○ 1360 x 768 47.
IN8606HD User’s Manual Projector Dimensions 264.1mm [10.40"] 285.1mm [1 1.22"] 130.4mm [5.13"] 122.3mm [4.81"] – 50 –.
IN8606HD User’s Manual – 51 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
IN8606HD User’s Manual – 52 – A PPENDIX I Serial Communication The following table describes the serial comm unication configuration t hat should be used when interfacing to CLI via the serial port. Windows HyperTerminal or ProComm are two tools that can be used to send CLI commands across the serial port.
IN8606HD User’s Manual – 53 – No Function Command RW Min Max Default Step Parameter 16V Color Temp T MP RW 0 2 Source Specific 1 Valid only when Display Mode = User 0:Warm 1:Normal 2:Cold 17V Co.
IN8606HD User’s Manual – 54 – No Function Command RW Min Max Default Step Parameter 63V Language LAN RW 0 20 0 1 0:English 1:French 2:German 3:Spanish 4:Portuguese 5:Simplified Chinese 6:Traditi.
IN8606HD User’s Manual – 55 – No Function Command RW Min Max Default Step Parameter 117 Projector Lo w Power Hours LTE R 0 9999 Displays the numbers of hours that the projector has run in Low Power (Eco) mode over its life (including all lamps).
An important point after buying a device InFocus IN8606HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus IN8606HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus IN8606HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus IN8606HD you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus IN8606HD will certainly help you make a decision on the purchase.
If you already are a holder of InFocus IN8606HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus IN8606HD.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus IN8606HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus IN8606HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
