Instruction/ maintenance manual of the product IN5104 InFocus
Go to page of 51
InFocus C orporate Headquarters: 27500 SW Parkway A venue Wilsonville , Oregon 97070-9215, USA Phone: 503-685-8888 1-800-294-6400 F ax: 503-685-8887 In Europe InFocus International B .
1 Declaration of Conf ormity Manufacture r: InFocus Corporatio n, 275 00 SW Parkway A ve. W i lson ville, Oregon 97070 USA European Office: Louis Armstrongweg 1 1 0, 131 1 RL Almere, The Netherlands W.
2 Do not look into laser beam emitted f rom the front of the remote control Location of laser beam warning labels on remote Location of laser beam warning labels on remote OR this label Do not look in.
3 T able of Contents Introduction 5 Included Items 5 Positioning the projector 7 Connecting a computer 8 Require d computer con nections 8 Displaying a computer image 10 Adjusting the image 11 Connect.
4 Impor tant Operating Considerations for Safety • Place the pro jector in a horizontal po sition no greate r than 8 degre es off axis. • Locate the projector in a well-ventilated ar ea without any obstructions to intake or exhaust vents. Do not pl ace the pr ojector on a tablecloth or other soft covering that may block the vents.
5 Intr oduction Y our new multimedia pro jector pr ovides thr ee computer , three video, and four audio inputs, one audio output, and RS-232 and Network contr ol. It has XGA 1024x768 re solution. Optional us er-changeable shor t, fixed short, long and ultra long throw lenses m ake this a flexible prod uct suitable for many differ ent uses.
6 Connector P a nel The pr ojector pr ovides three computer and three video connection options: • one VESA computer • one HDMI™ (High Definition Multimedia Inte rface)* • one compon ent BNC (G.
7 P ositioning the projector T o determine where to position the pr ojector , consider the size and shape o f your screen, the location of your po we r outlets, and the distance bet ween the projector and the r est of your eq uipment. Here ar e some general guide- lines: • Position the pr ojector on a flat surface at a right angle to the scr een.
8 Connecting a computer Requir ed computer connections Connect one end of the VESA computer cable to the Computer 2 connector on the projector . Connect the other end to the video port on your computer . If you are using a desktop computer , you first need to disconnect the moni- tor cable fr om the computer ’s video port.
9 If you are using a desktop compu ter and want to see the image on your computer scr een as well as on the pr o j ection scr een, plug the monitor cable to the Monitor out connecto r on the projector .
10 Displa ying a computer ima ge Remove the lens cap. Press the power switch on the back of the pr ojector to the on (I) position. The Power light on the Status Indi cator Panel (pag e 15) lights gr een. Press the Po w e r button on the top of the projector or the remote.
11 Adjusting the imag e Adjust the height of the projector , if necessary , by pressing the release but- tons on each side of the pr ojector ’ s fr ont to extend the elevator feet. Position the projector the desir ed distance from the screen at a 90 degree angle (perpendicular) to the scr een.
12 Connecting a video de vice Standard video connections Plug the audio/video (A/V) cable’s yellow connector into the video-out connector on the video device.
13 Displa ying a video ima ge Remove the lens cap. Press the power switch on the back of the pr ojector to the on (I) position. The Power light on the Status Indi cator Panel (pag e 15) lights gr een. Press the Po w e r button on the top of the projector or the remote.
14 Adjust the zoom or focus by r otating the Zoom or Focus rings inside the lens door until the desir ed imag e size and f ocus are pr oduced. If the image is not on the screen or vi ewing ar ea, adjust it by using the lens shift dials inside the lens door .
15 Shutting do wn the pr ojector The pr ojector automatically blanks the scr een after no active sour ce is detected for 5 minutes. This blank scr een helps pr eserve the life of the pro- jector . The image r eturns when an active source is detected or a r emote or keypad button is pressed.
16 Pr oblem Soluti on Result No startup screen Plug po wer cabl e in, press po wer switch and po wer button. Remo ve lens cap . Corr ect image Only startup scr een appe ars/no computer image Press the.
17 No computer image, just the w ords “Signal out of range” Adjust computer r efresh rate in Contr ol P anel >Displa y>Settings>Advanced> Adapter (location va ries b y operating system.
18 Pr ojector tr oubleshooting Pr oblem Soluti on Result Imag e not square Adjust ke ystone the P ictur e menu Squar e imag e Imag e not sharp Adjust the focus ring or Sharpness in the Pictur e>Adv.
19 Imag e upsi de do wn T urn on/off Ceiling in Settings>Sy stem menu Corre ct imag e Imag e re versed left to right T urn on/off Rear in Settings>S ystem menu Corr ect image Projected colors do.
20 Lamp won’ t turn on, T em p light is lit (pag e 15) Mak e sur e vents aren’ t block ed; allo w project or to cool for one minute Unplug projector ; wait 20 minutes; plug in projector and turn i.
21 Still ha ving problems? If you need assist ance, visit our website or call us . See the inside of the back cover for a list of all r elevant web addresses . This product is backed by a limited warranty . An extended warranty plan may be purcha sed from your dealer .
22 Using the k eypad buttons po wer –turns the projector on (page 10) and of f (page 15). menu –opens the on-screen menus (page 27). up/down arr ows –navigates to and adjusts se ttings in the menus (page 27). select –confirms choices made in the menus (page 27).
23 Using the r emote contr ol The r emote uses two (2) pr ovided AAA batteries (Hitachi Maxell, part num- ber LR03). They ar e easily installed by sliding the cover of f the remote's back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover .
24 Using the audio T o play sound from the projector , connect your sour ce to an Audio In con- nector on the projector . T o adj ust the volume, mute, or loudne ss, use the Audio menu (see page 31). T roub leshooting audio If there is no sound, check the following: • Make sure the audio cab le is connected.
25 Optimizing computer imag es After your computer is connected prop erly and the computer ’s image is on the screen, you can optimize the imag e using the onscr een menus. For gen- eral information on using the menus, see page 27. • Adjust the Keystone, Contrast, or B rightness in the Pictur e menu.
26 Optimizing video imag es After the video device is connected prop erly and the image is on the scre en, you can optimize the image using the onscreen menus. For general informa- tion on using the menus, see page 27. • Adjust the Keystone, Contrast, Brightne ss, Color , or T int in the Pi ctur e menu.
27 Using the menus T o open the menus, pres s the menu button on the keypad or r emote. (The menus automatically close after 60 seconds if no buttons ar e pressed.) The Main menu appears. Use the arrow bu ttons to mov e up and down to high- light the des ired submenu, then press the Sel ect butt on.
28 Pictur e menu T o adjust the foll owing six settings, highlight the setting, press Select , use the up and down arr ows to adjust the v alues, then press select to confirm the changes. Ke y s t o n e V e r t i c a l : adjusts the image vertically and makes a squar er image by using an adjustable scale b and.
29 Presets : Pr esets are provide d that optimi ze t he projector fo r displaying computer pr esentations and video images in dif ferent li ghting conditions and on differ ent backgrounds.
30 Video Standard : when set to Auto, the projec tor attempts to automatically pick the video standar d based on the input signal it recei ves. (The video standard options may vary depending on your r egion of the world.) If the projector is unable to det ect the corr ect standar d, the colors may not look right or the image may appear “torn.
31 Settings menu Audio : allows adjustments to the volume. Also allows you to turn on and off the Internal speakers and assign a particular sour ce to a specific audio input. If your HDMI source has pr ob lems with its audio stream, you can mute it by selec ting HDMI Noise Cancel.
32 Po w e r S a v e : automatically turns the lamp of f after no signals are detected for 20 minutes. After 10 addi tional minutes with no signal, the projector powers down. If an active signal is received befo re the pr ojec- tor powers down, the image will be displayed .
33 Custom K ey (for use with optional remote on ly): allows yo u to assign a dif- ferent function to the Custom key on the optional r emote to quickly and easily use the ef fect. Only one effect can be enab led at a time. The default is Sour ce Info; highli ght an effect and pr ess Select to choose a different one.
34 Language : allows you to select a language for the onscreen displa y of menus and messages. Ser vice : to use these features, hi ghlight them and pr ess Select . Factory Reset : restor es all settings (except Lamp and Filter Hours and Net- work settings) to their default after di splaying a confirmation dialog box.
35 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a s oft, dry cloth. A void using an exce ssive amount of cleaner , and don’t apply the cleaner directly to the lens. Abrasive clean ers, solvents or other harsh chemicals might scratch the lens.
36 Replacing the pr ojection lamp The lamp hour timer in the Service I nfo menu counts the number of hours the lamp has been in use. T wenty ho urs before the specified end of the lamp’s life, the message “Change lamp ” briefly appears on the projected screen.
37 4 Loosen the three captive scr ews (m arked by the arrows) on the lamp module. When replacing the l amp, ne ver touch any scr ews without the arrow mark. 5 Carefully remove the lamp module by grasping and lifting the handl e. Dispose of the lamp in an en vironmentally proper manner .
38 Cleaning the dust filter 1 T urn off the pr ojector and unplug the power cable. 2 W ait 45 minutes to allow the projector to cool thoroughly . WA R N I N G : T o avoid burns, allow the pr ojector to cool for at least 45 minutes before you clean or replace the dust filt er .
39 Appendix Pr ojected image siz e NO TE : V isit the Service section of o u r websit e for interactive image size cal- culators for the standard and optional lenses. T able 2: Pr ojection sizes: Sta n dar d lens (1.5 - 1.8:1 thr ow ratio) The image of fset range for the standard lens is 9:1 (90%) to 1:1 (50%).
40 T able 4: Pr ojection sizes: Short Zoom lens (1.2 -2.0:1 thr ow ra tio range) T able 5: Pr ojection sizes: Long Thr ow lens (1.9 - 3.9: 1 thro w ratio range Pr ojection Distance (inch/m) Scree n Siz e (inch/m) Minimu m Maxim um 40/1 39/1.0 63/1.6 60/1.
41 T able 6: Pr ojection sizes: Ultra Long Thr ow le ns (3.9 - 7.4:1 thro w ratio range Pr ojection Dist ance (inch/m) Scree n Siz e (inch/m) Minimum Maximum 40/1 122/3.1 236/6.0 60/1.5 189/4.8 354/9.0 70/1.8 220/5.6 513/10.5 100/2.5 315/8.0 594/15.1 120/3 382/9.
42 RS-232 commands Communication Configuration V isit our website for additional RS-232 settings and information. T o control this projector via RS-232, connect a null modem cable and set th e contro .
43 Err or Conditions Not all commands are suppo rted for all projectors. If an unsupport ed com- mand is issued, the co mmand will be ignored. If a comma nd is rec eived that is not understood, a ‘?’ character will be re turned indicating the command was not understood.
44 Blank Scr een 0: black 1: blue 2: white BSC at R W 0 2 1 Blue Gain BCG at R W 64 192 128 1 Brightness BR T at R W 96 160 128 1 Ceiling 0: disable 1: enable CEL at R W 0 1 0 Color CLR at R W 96 160 .
45 IR Receiver fr ont 0: disable 1: enable IRF at R W 0 1 1 IR Receiver r ear 0: disable 1: enable IRR at R W 0 1 1 IR Receiver t o p 0: disable 1: enable IR T at R W 0 1 0 Language 0 = English 1 = Fr.
46 Menu 0: disable 1: enable MNU at R W 0 1 0 Menu Na vigation 0: up 1: down 4: select NA V at W 0 4 n/a Mute 0: disable 1: enable MTE at R W 0 1 0 Network Restart 0: not restart 1: restart NTR at W 0.
47 Sa ve User Presets 3 0: not sa ved 1: sa ved US3 at W 0 1 n/a Scree n Sav e 0: 5 minu tes 1: 10 m inutes 2: 15 m inutes 3: 20 m inutes 4: 25 m inutes 5: 30 m inutes SSV at R W 0 5 0 Sharpness 5 = S.
48 V ertical Position VPS at R W if def< 128: 0 else: def - 128 def +128 auto 1 Video Standar d 0: Auto 1: NTSC 2: P AL 3: SECAM VSU at R W 0 3 0 Vo l u m e V O L a t RW 0 3 2 1 6 1.
49 INDEX Numerics 1024x768 resolution 5 A Aspect Ratio 33 audio 24 Audio In connector 8, 12 Auto Image 33 Auto Power 31 Autosource 31 B Blank 33 BNC 8 Brightness 11 C Capture Position 32 Capture Start.
50 lens, cleaning 35 Low Power 31 M Magnify 33 Main menu 27 menu system 27 Monitor connector 9 Mute 33 N Network 33 Network connector 9 Network Info 33 no computer image 17 no startup screen 16 O only.
An important point after buying a device InFocus IN5104 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus IN5104 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus IN5104 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus IN5104 you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus IN5104 will certainly help you make a decision on the purchase.
If you already are a holder of InFocus IN5104, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus IN5104.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus IN5104. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus IN5104 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
