Instruction/ maintenance manual of the product IN3118HD InFocus
Go to page of 54
.
— i — Cop n ual, nor any of the material contained herein, may be written consent of the author. © Copyright 2011 Dis he content hereof without obligation of the manufacturer to notify any person of such revision or ch anges.
IN3118HD User’s Manual — ii — Important Safety Information Important: It is strongly recommended that you read this sect ion carefully be fore using the projector. These safety and usage instructions will ensure that you enj oy many years of safe use of the pr ojector.
Preface Projector Installation Notice ¾ Place the projector in a horizontal p ositio n The tilt angle of the projector should not excee d 15 de gre es, nor should the projector b e installed in any way other than the desktop and ceiling mou nt, ot herwise lamp li fe could decrease dramatically.
IN3118HD User’s Manual Replacing the Lamp Replacing the lamp can b e hazardous if done in correctly. See Replacing the Proje ction Lamp on page 33 for clear and safe instructi ons fo r this procedure. Before replacing the lamp: ¾ Unplug the power cord.
Preface – v – Table of Contents GETTING STARTED ........................................................................................................................................................... 1 P ACKING C HECKLIST .....................
IN3118HD User’s Manual — vi — P ROJECTION D ISTANCE VS . P ROJECTION S IZE .................................................................................................................... 43 Projection Distance and Size Ta ble ..............
DLP Projector – User’s Manual – 1 – G ETTING S TARTED Packing Checklist Carefully unpack the projector and che ck that the following items are included: DLP P ROJ EC TO R R EMOTE CONTROL ( B A.
IN3118HD User’s Manual Views of Projector Parts Front-right View 1 34 5 6 7 2 I TEM L ABEL D ESCRIP TION S EE PAGE : 1. Elevator button Push to release elevator foot 2. Elevator foot Adjusts level of projector 10 3. Lens Projection Lens 4. IR receiver Receives the remote control IR sign al 6 5.
DLP Projector – User’s Manual Top view—On-screen Displa y (OSD) buttons and LEDs Source Menu Enter Re-sync 11 10 12 1 2 4 5 6 3 7 8 9 I TEM L ABEL D ESCRIP TION S EE PAGE : Solid Green Power On / Standby 1. Power LED Off Power Off (AC Off) Solid Red The lamp is powered on.
IN3118HD User’s Manual Rear view I TEM L AB E L D ESCRIPTION S EE PAGE : 1. AC IN Connect the POWER CABLE 9 2. (USB) Connect the USB CABLE from a computer (used for presentation slid e cont rol with the projector remote ) 3. S-VIDEO IN Connect the S-VIDEO CABLE from a video device 4.
DLP Projector – User’s Manual Bottom view I TEM L ABEL D ESCRIPTION S EE PAGE : 1. Leveling foot Rotate leveling foot to adjust angle position. 10 2. Ceiling support holes Only use with an InFocus ceiling mount system (p/n PRJ-M NT-UNIV). See your InFocus dealer o r go to www.
IN3118HD User’s Manual Remote Control Par ts Important: 1. Avoid using the projector with bright fluoresc ent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the re mote control and the proj ector.
DLP Projector – User’s Manual – 7 – I TEM L ABEL D ESCRIP TION S EE PAGE : 1. Power ON Turn the projector on 9 2. LED indicator Only lights when the remote keys are pressed 3. Display Mode Choose a suitable preset mode for usage environment 4.
IN3118HD User’s Manual – 8 – S ETUP AND O PERATION Inserting the Remote Control Batteries 1. Remove the battery compartment cover by sliding the cover in the di- rection of the arrow. 2. Insert the batteries (not included) as shown in the illustration.
DLP Projector – User’s Manual Starting and Shutting down the Proje ctor 1. Connect the power cord to the pro- jector. Connect the other end to a wall outlet. The POWER LED will be on. 2. Turn on the connected devices. 3. Ensure the POWER LED dis- plays a solid green.
IN3118HD User’s Manual Adjusting the Project or Le vel Take note of the following when setting up the projector: • The projector t able or stand should be level and sturdy .
DLP Projector – User’s Manual Adjusting the Zoom ring, Focus and Keystone 1. Use the Zoom control (on the projector only) to resize the projected image and screen size B . 2. Use the Focus control (on the projector only) to sharpen the pro- jected image A .
IN3118HD User’s Manual Adjusting the Volume 1. Press the Volume but- tons (on the projector or the remote control). The volume control appears on the display. 2. Use the Vol +/- buttons (on the projector or the remote control). 3. Press the MUTE button to turn off the audio (This feature is avail- able only on the remote).
DLP Projector – User’s Manual – 13 – O N -S CREEN D ISPLAY (OSD) M ENU S ETTINGS OSD Menu Controls The projector has an OSD that lets you ma ke image adjustments and c hange various settings. Navigating the OSD You can use the remote control cursor buttons or the projector keyp ad to navigate and make changes to the OSD.
IN3118HD User’s Manual Setting the OSD Language Set the OSD language to your pr eference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to SETUP>>Basic . 2. Press the cursor ▲▼ button until Language is highlighted.
DLP Projector – User’s Manual OSD Menu Overview Use the following illustration to quickly find a se tting or determine the range for a setting. PICTURE>> Basic Display Mode Brightness Tint C.
IN3118HD User’s Manual PICTURE>>Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the PICTURE>>Basic menu.
DLP Projector – User’s Manual PICTURE>>Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the PICTURE>>Advanced menu. Press the cursor ▲▼ button to move up and down in the PICTURE>>Advanced menu.
IN3118HD User’s Manual HSG Adjustment Press the ENTER/SELECT button to enter the HSG Adjustment sub menu. I TEM D ESCRIP TION Primary Color Press the ◄► buttons to set the Primary Color. Notes: There are si x colors ( R / G/ B/ C/ M/ Y) to be cus tomized.
DLP Projector – User’s Manual DISPLAY Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the DISPLAY menu. Press the cursor ▲▼ button to move up and down in the DISPLAY menu. Press ◄► to change values for settings.
IN3118HD User’s Manual PC Detail Adjustment Press the ENTER/SELECT button to enter the PC Detail Adjustment sub menu. Note: Customizing the settings in PC Detail Adjustment menu is only available when PC input source (ana- log RGB) is selected.
DLP Projector – User’s Manual SETUP>>Basic Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the SETUP>>Basic menu. Press the cursor ▲▼ button to move up and down in the SETUP>>Basic menu.
IN3118HD User’s Manual Menu Settings Press the ENTER/SELECT button to enter the Menu Settings sub menu. I TEM D ESCRIP TION Menu Position Press the ◄► buttons to select from five OSD locations: Top-Left/ Top-Right/ Center / Bottom-Left/ Bottom-Right.
DLP Projector – User’s Manual Lan Control Settings Press the ENTER/SELECT button to enter the Lan Control Settings sub menu. I TEM D ESCRIP TION Control By Press the ◄► buttons to select projector remote command cont rol. Selecting RJ45 enables RJ45 cont rol a nd disables the RS232 port.
IN3118HD User’s Manual Network State I TEM D ESCRIPTION Network State Displays the network conn ection status. DHCP Press ◄► to turn DHCP On or Off. Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS fields. Projector IP Ad- dress Enter a valid IP address if DHCP is turned off.
DLP Projector – User’s Manual For simplicity and ease of operation, the proj ector provides diverse networking and rem ote management fea- tures. The LAN/RJ45 feature allo ws the projector to be conn ected to a net work and remotely manag e d.
IN3118HD User’s Manual Preparing Email Alerts 1. Make sure that user can access the hom epage of LAN RJ45 function by web browser (for ex- ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Mail Settings . 3.
DLP Projector – User’s Manual The From field is the sender’s email address (for exam ple, the projector adm inistrator). This is a required field. Select the alert conditions by checking the desired boxes. Note: Fill in all fields as specified.
IN3118HD User’s Manual SETUP>>Advanced Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the SETUP>>Advanced menu. Press the cursor ▲▼ button to move up and down in the SETUP>>Ad- vanced menu.
DLP Projector – User’s Manual Audio Press the ENTER/SELECT button to enter the Audio sub menu. I TEM D ESCRIP TION Volume Press the ◄► buttons to adjust the audio Volume. Treble Press the ◄► buttons to adjust the audio Treble. Bass Press the ◄► buttons to adjust the audio Bass.
IN3118HD User’s Manual HDMI Press the ENTER/SELECT button to enter the HDMI sub menu. I TEM D ESCRIPTION HDMI Format Press the ◄► buttons to select from three HDMI display formats: Auto/ PC signal/ Video signal. HDMI Amplifier Gain Press the ◄► buttons to adjust HDMI Amplifier Gain.
DLP Projector – User’s Manual Presentation Timer The Presentation Timer func tion can indicate the presentation ti me on the screen to help you achieve better time management when giving presentation s . I TEM D ESCRIP TION Timer Press the cursor ◄► button to enable or disable presentation timer.
IN3118HD User’s Manual STATUS Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the STATUS Menu . I TEM D ESCRIP TION Source Displays the activated input source. Resolution Displays the nativ e resolution of input source.
DLP Projector – User’s Manual – 33 – M AINTENANCE AND S ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. Be sure to use the InFocus lamp module de- signed for this projector. You can order new lamps from www.
IN3118HD User’s Manual 2. Remove the single screw on the lamp compartment cover. 3. Remove the lamp com- partment cover. 4. Remove the three screws from the lamp module.
DLP Projector – User’s Manual 6. Pull firmly on the module handle to remove the lamp module. 7. Reverse steps 1 to 6 to in- stall the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage.
IN3118HD User’s Manual – 36 – Cleaning the Projector Cleaning the projector to remove dust and gr ime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 60 minutes before cleaning. Failure to do so could result in a severe burn.
DLP Projector – User’s Manual – 37 – T ROUBLESHOOTING Common Problems and Sol utions These guidelines provide tips to deal with problem s you may encounter while using the projector. If the problem remains unsolved, cont act your dealer for assistance.
IN3118HD User’s Manual – 38 – LED Error Messages E RROR C ODE M ES SAGES P OWER LED L AMP / R EADY LED T EMP LED Powered on Solid Green So lid Red OFF Powering up Solid Green Flashing Red OFF Co.
DLP Projector – User’s Manual – 39 – Problem: The image is streaked 1. Set the Frequenc y and Tracking settings on the Display >> PC Detail Adjustment menu of the OSD to the default settings. 2. To ensure the problem is not caused by a connected PC’ s video card, conn ect to another computer.
IN3118HD User’s Manual – 40 – Audio Problems Problem: There is no sound 1. Adjus t the volume on the remote control. 2. Adjust the volume of the audio source. 3. Check the audio cable connection. 4. Test the source audio output with other speakers.
DLP Projector – User’s Manual – 41 – HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announ ced that cables would be tested as Standard or High- Speed cables.
IN3118HD User’s Manual – 42 – S PECIFICATIONS Specifications Model IN3118HD Display ty pe TI DLP DMD 0.65” Native Resolution 1920 x 1080 Projection distance 1 meters ~ 10 meters ( 3.28 ft ~ 32.8 ft ) Projection screen size 23.67" ~ 284" ( 60cm ~ 72 1cm ) Projection lens Manual Focus/Manual Zoom Zoom ratio 1.
DLP Projector – User’s Manual Projection Distance vs. Projection Si ze Projection Distance and Size Table 16:9 SCREEN PROJECTION DISTANCE DIAGONAL WIDTH HEIGHT INCH MM MM ( INCH ) MM ( INCH ) MIN LENGTH (WITH MA X ZOOM) AVERAGE MAX LENGTH (WITH MIN ZOOM) VERTICAL OFFSET (A) MM ( INCH ) 30 762 664(26) 374 (15) 1056(42) 1162(46) 1267(50) 56(2.
IN3118HD User’s Manual – 44 – Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO VGA ( ANALOG ) HDMI ( DIGITAL ) NTSC — 15.
DLP Projector – User’s Manual – 45 – S IGNAL R ESOLUTION H-S YNC (KH Z ) V-S YNC (H Z ) C OMPOSITE / S-V IDEO VGA ( ANALOG ) HDMI ( DIGITAL ) 720p 37.5 50.0 — O O 720p 45.0 60.0 — O O 1080i 33.8 60.0 — O O 1080i 28.1 50.0 — O O 1080p 67.
IN3118HD User’s Manual Projector Dimensions – 46 –.
DLP Projector – User’s Manual – 47 – R EGULATORY C OMPLIANCE FCC Warning This equipment has been tested and found to comply wi th the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules.
An important point after buying a device InFocus IN3118HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus IN3118HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus IN3118HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus IN3118HD you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus IN3118HD will certainly help you make a decision on the purchase.
If you already are a holder of InFocus IN3118HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus IN3118HD.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus IN3118HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus IN3118HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
