Instruction/ maintenance manual of the product IN2112 InFocus
Go to page of 45
Regulatory models: V2000, M2100 IN2112, IN2114, IN2116 010-0735-02 DISPERINDAG No. 0287/1.824.51/09.0.
1 Declaration of Conformity Manufacturer: InFocus Corporation, 13190 SW 68th Parkway , Portland, Oregon 97223-8368 USA W e declare under our sole responsibility that this pr ojector conforms to the fo.
2 T able of Contents Introduction 4 Positioning the projector 6 Ceiling Mount 7 Connect ing po wer 8 Connecting a computer source 8 Optional computer connections 9 Displaying an image 10 Adjusting the.
3 Important Operating Co ns iderations for Safety • Refer to this guide for proper startup and shutdown p rocedures. • Follow all warnings and cautio ns in this manual and on the projector . • Place the projector in a horizontal pos ition no greater than 8 degrees off axis.
4 Intr oduction Y our new digital projector is simple to c onnect, easy to use, and straigh tforward to maintain. It is a versatile projector that is flexible enough for business presentations and home video viewing, too.
5 Connector panel The projector provides both computer and video connecti on options, including: • VGA computer (2) •S - v i d e o • Composite video • Separate audio inputs for video and compu.
6 Positioning the projector T o determine where to position the project or , consi der the size and shape of your screen, the location of your power outlets, and t he distance between the projector and the rest of your equipment. Here are some general guideli nes: • Position the projector on a flat surface at a right angle t o the scre en.
7 Ceiling Mount If you wish to install the projector on the ceiling: • W e strongly recommend using InFocus ap proved ceiling mo unts f or proper fit - ting, ventilation and instal lation. Refer to the installation guide tha t com es with the InFocus Ceilin g Mount Kit (p /n SP-CEIL-UNIV) for more informa - tion.
8 Connecting power Connect the black power cord to the Power connector on the rear of the projector and to your electrical outlet. The Powe r light on the Status Indicator Panel ( page 14 ) turns amber . NOTE : Always use the power cord th at shipped with the projector .
9 Optional computer connections T o get sound from the projector, connect an audio cable (optional cable, not included) to your computer and to the Audio 1 or Audio 2 connector on the projector . (Default settings are as follow s: Audio 1 is used with VGA 1 and VGA 2; Audio 2 is used with S-video and composit e.
10 Displaying an image T ouch the Power button on the keypad or the remote. The Power button blinks green and t he fans start to run. When the lamp turns on, the start up screen will display and the Power button will become solid g reen. It can take a minute for the image to achieve full brightness.
11 Adjusting the image If necessary , adjust the height of the proj ector by pressing the el evator foot release button to extend the foot. Rotate the elevator fee t for granul ar ad ju stment of the proj ector ’s height. A void placing your hands near the hot exhaust vent at the side of the projector .
12 Connecting a video device Y ou can connect vide o devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles , HDTV receivers, and TV tuners to the projector .
13 What is Aspect Ratio? Aspect ratio is the ratio of the image wi dth to image height. St andard TV screens and older laptops are 4:3; HDTV and most DVDs are 16:9; and widescreen computers are 16:10. If you are projecting onto a screen, the size/shape of the screen will influence the aspect ratio you decide to use.
14 Shutting down the pr ojector Screen Save T ime Y ou can make the black screen appear afte r a preset n umber of minutes by turning on the Screen Save T ime feat ure in the Setup menu.
Problem Solution Result No start up screen Plug power cord into the p r ojector then press power button Corr e ct ima ge Startup Screen A Startup Screen Only start up screen appears Restart laptop Pre.
16 Problem Solution Result No computer image, just the words “Signal out of rang e” A Signal out of the range Press the Auto Image button on the keypad or remote. T o adjust computer refresh rate, go to Control Panel > Display > Settings > Advanced > Adapter (location varies by operating system).
17 Image fuzzy or cropped A A For a laptop, disable lap top monitor or turn- on dual-display mode Set your computer’ s display r esolution to the native resolution of the pr ojector (S tart > Set.
18 Image not square Adjust Keystone in the Basic Pi cture menu Square image Image not sharp Adjust Sharpness in the Basic Picture menu Correct image Image does not fit 4:3 or 16:9 scr een Change aspec.
A 19 Image upside down T urn off Ceiling Mo unt in Setup menu Correct image Image reversed left to right A T urn off Rear Pr oject in Setup menu Correct image COLOR Projected colors don’t match sour.
20 The video embedded in my PowerPoint presentation does not play on the screen A B T urn off the internal LCD display on your laptop Embedded video plays correctly A B Lamp won’t turn on, T emperature light is on T emperature light Make sure vents ar en’t blocke d, turn the projector off and allow it to cool for one minute.
21 S till need assistance? If you need assistance, visi t our support website at www .infocus.com/s upport or call us. Check out the How T o section fo r additional information on using this projector for home theater or gaming applications. This product is backed by a limited warr anty .
22 Using the remote contr ol The remote uses two (2) AA batteries. Y ou can install the batteries by removing the cover from the remote’ s back, aligning the + and - ends of the batteries, sliding them into place, and t hen replacing the cover . Caution : • When disposing of the batteries, be sure to do so in an en vironmentally proper manner .
23 Using the audio Using the projector’s speakers T o use the projector ’ s speaker , connect your source to the Audio In Computer or V ideo connectors.
24 Using the keypad buttons Most buttons are described in detail in other sec tions, but here is an overview of their functions: Power –turns the pro jector on and off ( page 8 ). Auto Image –resynchronize the projector to the source. Presets –cycles through the avai lable preset settings ( page 27 ).
25 • Adjust the Keystone, Contra st, Brightness, Color , T i nt or Sharpness in the Basic Picture menu ( page 27 ). • Change the Aspect Ratio. Choose the option that best fits your input source ( page 27 ). • Adjust the Color T empe rat ure. Select a list ed warmth value ( page 28 ).
26 Using the menus T o open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and do wn to highlight the desi red menu, then press the Select button.
27 Basic Picture menu T o adjust the following settin gs, highlight the setting, press Select , u se the arrow buttons to adjust the values, then press Select to confirm the changes.
28 Advanced Picture menu BrilliantColor™ : Produces an expanded onscreen co lor spectrum that delivers enhanced color saturation for bright, true -to-life images. Choo se Normal Look for most video sources and Bright Look for most computer sour ces.
29 Setup menu Language : Allows you to select a la nguage for the onscreen display . Network : (IN2114 & IN2116 only ) Allows you to setup network settings. See page 33 for details on network co nfiguration and operation. • DHC P : Tu rns the DHCP on or of f.
30 Audio Inputs: Assign an audio input to a specif ic video/computer source input. (Default settings are as fo llows: Audio 1 is used with VGA 1 and VGA 2; Audio 2 is used with S-vi deo and composite.
31 PIN Protect : The PIN (personal identification n umber) feature allows you to password protect your projector . Once you enable the PIN feature, you must enter the PIN before you can project an image. The default PIN on this pr ojector is Menu-Up-Down-Sele ct-Source .
32 S tatus and Service me nu Source Info : Displays current source settings (read-only). Projector Info : Displays current projec tor settings (read- only). Reset Lamp Hours : Resets the lamp hours used c ounter in the Projector In fo menu to zero. Do this only after changing the lamp.
33 Using Network Functions (IN21 14 & IN21 16 only) IMPOR T ANT : T o enable network functions at al l times (even when the projector is powered off), the Network item in the Always-On Functi ons submenu in the Setup menu must be set to Y es (not No).
34 2 If you don't know the projector's IP address, turn on the projector . After the projector starts up, if its IP address is not shown, press the Source button t o view the IP a ddress.
35 ient E-Mail Addresses section, enter the email addresses of people who will receive emails, and for each address, sele ct whether that address receives reminders and/ or warnings and errors (enter only one address per line). After you have completed this page, click Send T est to make sure that email is correctly set up.
36 W eb Access - Administrator tab: Select whether or not Administrators must ente r a password to log into the projector's web pages. I f a password is required, click cre - ate or change password to upda te the administrator password.
37 Using LitePort (IN21 14 & IN21 16 only) LitePort displays a slide show of JPEG images st ored on a USB fla s h drive con - nected to the projector . This feature elimi nates the need for a computer source and can be integrated with co mmon wall plates and confer ence room input/output pan - els.
38 Show All Folders : Select On to have the slid e show displ ay al l im ages in all fold - ers. Select Off to have th e slide show display images only from the current folder . Fill Scr een : Sele ct On to have the slide show expand small image s to fill the screen.
39 T roubleshooting LitePort • If images load slowly: Make sure you are using a newer USB 2.0- compatible (high speed) USB flash drive. Larger image file sizes may also slow down the player; to redu.
40 Maintenance Cleaning the lens 1 T urn the projector off and unplug the power cord. 2 Slide open the len s cover , if the lens is covered. 3 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • A void using an excessive amount of cleaner , and don’t apply the cleaner directly to the lens.
41 Replacing the projection lamp The lamp hours timer in the Projector In fo menu counts the number of hours the lamp has been in use. T wenty hours befo re the lamp life e xpires, th e message “Replace lamp” appears on the s creen at startup. • NOTE : Be su re to use the InFocus lamp module desi gne d for this projector .
42 4 Loosen the two captive scre ws that attach the lamp housing to the projector . 5 Using the handle, carefully remove the la mp housing. Dispose of the lamp in an environmentally proper manner in acco rdance with local disp osal laws. 6 Install the new lamp housing, pressing the lamp into place.
43 INDEX Numerics 16x9 vs 4x3 12 A Aspect Ratio 12, 13 Audio In Computer connector 9 Audio Out connector 23 C cable box 12 Computer In connector 8 Connecting external speakers 23 connecting computer 8.
44 V Viewing a Slide Show 37 Volume button 23 W warranty 21 Z zoom 11.
An important point after buying a device InFocus IN2112 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus IN2112 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus IN2112 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus IN2112 you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus IN2112 will certainly help you make a decision on the purchase.
If you already are a holder of InFocus IN2112, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus IN2112.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus IN2112. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus IN2112 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
