Instruction/ maintenance manual of the product C105 InFocus
Go to page of 12
Version 1.0 REVISED VERIFIED n.a. APPROVED n.a. C85/C95/C105.
Projector Control Page 2 Version 1. 1 SETTING UP .................................................................................................................................... 3 1.1 R S 232 C ONTROL C ABLE .......................................
Projector Control Page 3 Version 1. 1 SETTING UP To enable serial control, do the following: • Remove the check mark from “ Serial Mouse” in the Projector’s FEATURE MENU. This changes the Baudrate from 1200 to 9600 and turns of the Serial mouse data.
Projector Control Page 4 Version 1. 2 GENERAL This document describes the Communication Protocol between a Proxima® Projector and a Computer (Host). By using this connection the Host will be able control the projector. This document is HEX command based only and a regular Terminal program like hyperterminal etc.
Projector Control Page 5 Version 1. Currently there is only one type of body so the size is fixed to 0x0006. The CRC field contains the CRC of the message.
Projector Control Page 6 Version 1. 5 COMMAND RETURN CODES The Serial protocol returns an acknowledgment (“return code”) for every packet sent. If the host sends a packet, then the projector acknowledge the receipt of this packet. The return codes are detailed in the table below.
Projector Control Page 7 Version 1. Host: 0xBE 0xEF 0x80 0x06 0x00 0x00 0x00 0x01 0x00 0x01 0x00 0x01 0x00 Example 5: Hex sequence for get Brightness Host: => 0xBE 0xEF 0x80 0x06 0x00 0xBD 0x70 0x0.
Projector Control Page 8 Version 1. 6 TABLE OF FUNCTIONS Scr.dep = Source depended Function FuncNum F.type States Minimum Maximum Power 0x01 State 1 (On) 0 (Off) - - Reset 0x02 Execute - - - Tune 0x03.
Projector Control Page 9 Version 1. Function FuncNum F.type States Minimum Maximum On screen display 0x30 State 1 (On) 0 (Off) - - Source 0x32 State 0 (VGA1) 1 (DVI1) 2 (S-VIDEO1) 3 (CVBS1) 4 (VGA2) 5.
Projector Control Page 10 Version 1. APPENDIX 1: CRC CALCUL ATION ALGORITHM The following ‘C’ code can be used to calculate the 16-bit CRC required for all packets. The CRC is contained in the packet header and is calculated for the entire packet (header plus body).
Projector Control Page 11 Version 1. // Lookup table used for hi-byte of CRC static const BYTE cCRCHiArray[] = { 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81.
Projector Control Page 12 Version 1. // Lookup table used for low-byte of CRC static const BYTE cCRCLoArray[] = { 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6,0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC.
An important point after buying a device InFocus C105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus C105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus C105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus C105 you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus C105 will certainly help you make a decision on the purchase.
If you already are a holder of InFocus C105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus C105.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus C105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus C105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
