Instruction/ maintenance manual of the product L400W Iiyama
Go to page of 24
USER MANUAL Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
FCC DECLARA T ION OF CONFORMITY Model Number: PLL400W Trade Name: iiyama Responsible party: IIY AMA North America, Inc. Address: 65 West S treet Road, Suite 101B, Warminster , P A18974 U.S.A. T elephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules.
FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fire or electric shock.
The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to its correct position.
BEFORE YOU OPERA TE THE MONITOR BEFORE YOU OPERA TE THE MONITOR 3 FE A TURES K 40" Wide TFT Color LCD Monitor K Supports Resolutions up to 1280 × 1024 (down scale) K Super Wide Viewing Angle and.
PREP ARING THE REMOTE CONTROL CAUTION Do not use any other batteries other than those specified in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the “+” and “–” indications in the battery compartment.
COMPUTER SETTING n Signal Timing Change to the desired signal timings listed on page 16 in COMPLIANT TIMING , after you confirm that the picture appears normally . n Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard.
BASIC OPERA TION n T urn on the monitor Press the Main Power Switch on the monitor. The monitor is turned ON when you press the Power Switch on the monitor or the Remote Control. Press again to turn OFF the monitor . [ Monitor ] Press the Power Switch.
+ – V-Position 50.
8 OPERA TING THE MONITOR Menu:2 AUTO 1280 × 768 H: 44 KHz V: 56 Hz Menu : 2 (Analog) Problem / Option Button to Press Adjustment Item Color T emp. Return T o Menu H i g hl i g h t “ Menu : 2” again.
Adjustment Item OSD -+ Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the following 5 positions within the overall display: Svenska Language English Deutsch English German Français Nederlands French Dutch Full Screen OFF Mode1 The picture is displayed at the optimum resolution.
Menu:1 1280 × 768 H: 44 KHz V: 56 Hz Menu : 1 (Digital) Digital Input Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense Return T o Menu Highlight “Menu : 1” again.
Menu:2 OSD -+ 1280 × 768 H: 44 KHz V: 56 Hz Direct Direct or or or or Direct OPERA TING THE MONITOR 11 Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD di.
F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. C Press the Auto Button. (Auto Set-up) D Adjust the image manually by following procedure below when the screen has a flicker or blur , or the picture does not fit in the display area after performing the Auto Set-up.
NOTE n When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2). n Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern.
TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a pi cture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERA TING THE MONIT OR or if the problem pers ists.
Operative temperature: S torage temperature: Humidity (-20 to under 30°C / -4 to under 86°F) : Humidity (30 to under 40°C / 86 to under 104°F) : Humidity (40 to under 50°C / 104 to under 122°F) .
3 8 1 2 4 5 6 7 9 10 11 12 18 23 16 17 19 20 21 22 24 P i n Input Signal Input Signal Pin T .M.D.S Data 2– T .M.D.S Data 2+ T .M.D.S Data 2 Ground Clock line (SCL) * Data line (SDA) * Analog V -Sync T .M.D.S Data 1– T .M.D.S Data 1+ T .M.D.S Data 1 Ground T .
RS-232C INTERF A CE Baud Rate n 9600bps Data Format n S t ar t: 1- bi t Data: 8-bit Parity: 0 (no Parity) S top: 1-bit Command n Command Name Function POF PON Turn off power Turn on power NOTE T ransmit POF and PON commands one by one. Allow an interval of 20 or more seconds between commands.
Approx. 9300K Menu : 1 (Video) Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast * 1 T oo dull T oo intense Color Hue Sharpness T oo soft T oo sharp Return to Menu H i g hl ig h t “ Menu : 1” again. Direct Direct T oo weak T oo strong Purplish Greenish Color T emp.
NTSC H: 16 KHz V: 60 Hz Menu:2 OSD -+ Direct Direct or or or or Direct APPENDIX B 1 9 Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any .
Problem / Option Menu : 3 (Video) Adjustment Item Input Source DVD VCR Select this in normal use. Correct the picture distortion and shaking. NOTE The picture may be shaking or distorted because of the type of video equipment. In this case, select VTR.
.
IIY AM A CORPORA TION 710-1 Kitaowaribe, Nagano-shi 381-0014 Japan Part No. 870Z223A02 This manual is printed on recycled paper..
An important point after buying a device Iiyama L400W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Iiyama L400W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Iiyama L400W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Iiyama L400W you will learn all the available features of the product, as well as information on its operation. The information that you get Iiyama L400W will certainly help you make a decision on the purchase.
If you already are a holder of Iiyama L400W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Iiyama L400W.
However, one of the most important roles played by the user manual is to help in solving problems with Iiyama L400W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Iiyama L400W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
