Instruction/ maintenance manual of the product T T 541 IBM
Go to page of 26
ENGLISH T541 Flat Panel Monitor User Guide.
i i First Edition ( September / 2002) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time.
ENGLISH 1 Setting up the monitor ...............................................................................................2 System Hardware Requirements .........................................................................2 Handling Instructions .
2 Setting up the monitor Handling Instructions Handling Instructions 1. Do not support the monitor within the screen area. The Liquid Crystal Display is glass and can be damaged by rough handling or excessive pressure. 2. Before using your monitor for the first time, remove the clear protective film from the front of the screen.
ENGLISH 3 Desk T op Use - Remove the clip on stand models Before adjusting your monitor for the first time, remove the locking clip on rear of the stand.
4 Connecting your Monitor Monitor Installation 1. Turn off your computer and all attached devices. Next, unplug the power cord(s) to your computer and all attached devices. 2. Connect the signal cable. The analog signal cable is already connected to your monitor.
ENGLISH 5 1. Switch on your monitor by pushing and releasing the power switch marked [ ] at the front of the bezel. [To switch off your monitor, push and release the power switch again.] 2. Switch on your computer. 3. If you are using the analog connector, run AUTO SETUP by following the instructions in the Auto Setup section on page 9.
6 To use the Plug and Play feature in Microsoft ® Windows ® 95 or Windows 98, files should be loaded from the IBM Monitor CD . 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit.
ENGLISH 7 To use the Plug and Play feature in Microsoft Windows 2000 or Microsoft Windows Millennium Edition(Me) files should be loaded from the IBM Monitor CD . 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly.
8 To use the Plug and Play feature in Microsoft Windows XP files should be loaded from the IBM Monitor CD . 1. Turn off the computer and all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit.
ENGLISH 9 For digital input, image setup is not required. When you first use your monitor, you must perform Auto Setup for analog input. If you are using digital input, continue with the instructions on page 13. This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing.
10 1. Turn on the monitor first; then the co m puter. If the message CHECK VIDEO CABLE is displayed, or if nothing is displayed, check: • that the video interface cable is not connected properly. • the correct video adapter card is not installed. 2.
ENGLISH 11 1. Turn on the monitor first; then the computer. If the message CHECK VIDEO CABLE is displayed, or if nothing is displayed, check: • that the video interface cable is not connected properly. • the correct video adapter card is not installed.
12 Normally, you can complete the setup procedure using Image S etup , however, if your screen image is still distorted after you perform Image S etup or the setup CD does not run on your system, perform M ANUAL S ETUP . 1. Have your monitor turned on for about 15 minutes, until the monitor warms up.
ENGLISH 13 i This section gives advice on how you can work comfortably and reduce fatigue. Rest Take regular breaks. Vary your posture, stand up and stretch occasionally as prolonged use of computer workstations can be tiring. Back Sit back in your chair and use the backrest.
14 Be sure to turn off the power before you perform any maintenance on the monitor. Clean your monitor as follows: • Gently wipe the covers and the screen with a soft cloth.
ENGLISH 15 Adjusting Y our LCD Monitor User controls USER CONTROL FEATURES Icon Direct Access Functions i The image is already optimized for many display modes, however the user controls can be used to adjust the image to your liking. i The settings are saved after adjustment and when exiting the OSD and will be effective thereafter.
16 The settings adjustable with the user controls are viewed through the On - Screen Display (OSD). Press the enter button [ ] to display the main OSD menu. Initial appearance of OSD main menu; On-screen display (OSD) controls i The LCD monitor needs time to become thermally stable the first time you turn it on each day.
ENGLISH 17 OSD Icon Select the COLOR MODE you find most comfortable or fine tune the colors using the USER COLOR MODE menu, if necessary. Description Sub-menu(s) MANUAL • Fine • Coarse Preset 1 (P.
18 OSD Icon Sub-menu(S) • YES • NO Controls and Adjustments Description RESET OSD SIZE Language Changes the size of the OSD menu on the screen. The language chosen affects only the language of the OSD. Select one of the five language to use for the OSD.
ENGLISH 19 i If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have reconfigured the computer, preferably to 1024 x 768 at 60Hz.
20 To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signaling (DPMS) Standard.
ENGLISH 21 T roubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. Problem No power to monitor.
22 i For image problems, you may want to run A UTO S ETUP again before consulting to this section. In most cases, A UTO SETUP can fix the problems. See Auto Setup for the computer on page 9 for details. Problem Possible Cause Suggested Action Reference There are noises in the video signal The color setting may be incorrect.
ENGLISH 23 This color monitor (Type-model 9512-Hxx) uses a 15-inch TFT LCD. i Power consumption figures are for the monitor and the power supply combined. Weight 5.3 kg (11.68 lbs) 15-inch (381.0 mm) 304.1 mm 228.1 mm 0.297 mm (H) x 0.297 mm (V) 100 - 240 Vac 60/50 ± 3Hz 0.
24 Addressabillty Refresh Rate / Range ( + / - 3%) Horizontal Frequency / Range ( + / - 3%) 640 x 480 58.2 ~ 61.8 Hz 30.56 ~ 32.45 kHz 640 x 480 64.0 ~ 68.0 Hz 33.95 ~ 36.05 kHz 640 x 480 72.8 ~ 77.3 Hz 36.38 ~ 38.63 kHz 640 x 350 67.9 ~ 72.1 Hz 30.56 ~ 32.
An important point after buying a device IBM T T 541 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM T T 541 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM T T 541 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM T T 541 you will learn all the available features of the product, as well as information on its operation. The information that you get IBM T T 541 will certainly help you make a decision on the purchase.
If you already are a holder of IBM T T 541, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM T T 541.
However, one of the most important roles played by the user manual is to help in solving problems with IBM T T 541. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM T T 541 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
