Instruction/ maintenance manual of the product SCOD-3ZVQ5W IBM
Go to page of 548
IBM eServer http://www-1.ibm.com/support/docvi ew. wss?rs=1201&uid=psg1SCOD- 3ZVQ5W&loc=en_US&cs=utf-8&lang=e August 8, 2006 Configuration and Options Guide SCOD-3ZVQ5W.
1 Twentieth Edition (August 200 6) © Copyright International Busi ness Machines Co rporation 200 3, 2006. All rights rese rved. US Gove rnment Use rs Restricted Righ ts - Use, duplication or disclosure restricted by GS A ADP Schedule Contract with IBM Corp.
© Copyright IBM Cor p. 2003, 2006 iii Contents Summary of Changes . . . . . . . . . . . . . . . . v Information sources . . . . . . . . . . . . . . . . vii IntelliStation ® video adapter selection guide ix Chapter 1. IntelliStation M Pro 6218 . . . .
iv COG Chapter 40. TotalSt orage DS300 disk system . . . . . . . . . . . . . . . . . . . . . . . . . . 413 Chapter 41. TotalSt orage DS400 disk system . . . . . . . . . . . . . . . . . . . . . . . . . . 417 Chapter 42. TotalSt orage DS4100 disk system .
© Copyright IBM Cor p. 2003, 2006 v Summary of Changes • Versions of this document released on or afte r August 8th, 2006, will contain refer ences to featu re codes. Feature code is the nonmenclature used to specify comp onents of configurable System x products used in US and Canada Web configurators.
vi COG.
© Copyright IBM Cor p. 2003, 2006 vii Information sources http://www-1.ibm.com/support/docview . wss?rs=1201&uid=psg1SCOD-3ZVQ5W Table 1. Inform ation Sources Audience Where to go How to get IBM xSeries Configura tion and Options G uide Customers www.
viii COG Additional URLs Technical spec sheets (PSREF) www.ibm.com/serve rs/eserver/xse ries/ Select Technical spec sheets (PSREF). IBM Datacente r Solutions www.ibm.com/serve rs/eserver/xse ries/windows/datacenter.html - Cluste ring (US, LA, CAN) www.
© Copyright IBM Cor p. 2003, 2006 ix IntelliStation ® video adapter selection guide Video Adapter 1 Imaging Dual-head Graphics Memory Signal Width Resolution Supported (each head) Monitor Connector .
x COG Notes: 1. Available only as standard equipm ent in an IntelliS tation workstation model or configured to o rder via CTO. 2. See IntelliS tation system At-A-Glance sections to identify models tha t include these standard video adapters.
© Copyright IBM Cor p. 2003, 2006 3 Chapter 1. IntelliStation M Pro 6218 Table 2. IntelliStation M Pro 6218 At-A-Glance Part Number 1 CPU/FSB Speed (GHz/MHz) - Cache Number of Proc essors (Std/Max) M.
4 COG 6218-47Y 3.6/800/ 2M-L2 1 / 1 2GB/ 4GB AT I F i r e G L V7100 Tower 1GB SCSI Fixed 73GB/9 00GB 48/32/48/16X Combo Drive 1 / 3 5 / 4 6218-48Y 3.4/800/ 4M-L2 1 / 1 2GB/ 4GB NVIDIA Quadro FX 3500 Tower 1GB SCSI Fixed 73GB/9 00GB 48/32/48/16X Combo Drive 1 / 4 5 / 4 6218-54Y 3.
Chapter 1. IntelliStation M Pro 6218 5 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
6 COG IntelliStation M Pro 6218 processor options IntelliStation M Pro 6218 memory options Notes: 1. Memory DIMMs must be installed in pairs. Each pair must be identical. SBB Number Feature Code Standard Processor SMP Support 39M6250 0299 Intel Pentium 4 Processor 630, wit h EM64T (3.
Chapter 1. IntelliStation M Pro 6218 7 Figure 1. M Pro 6218 system board Table 3. Standard Mem ory Configuration Model Std. DIMM Configuratio n 10Y, 12Y, 20Y, 32Y, 34Y, A0Y, A2Y, B0Y, C2Y, C4Y, 25Y, B.
8 COG IntelliStation M Pro 6218 hard disk drive (HDD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty Diskette Drives 23K4959 05K9276 5300 I.
Chapter 1. IntelliStation M Pro 6218 9 Notes: 1. A maximum of th ree HDDs for SA S or SCSI models or four SA T A HDDs in SA T A models are suppo rted. The third SAS or S CSI and the fou rth SA T A HDD must have a optional tray.
10 COG Figure 2. M Pro 6218 fro nt view Bay Form Factor Height Front Access Usage 15 . 2 5 H H Y e s S t d . O p t i c a l 2 5.25 HH Yes Optical/Tape /SA T A HDD/ SCSI HDD/ SAS HDD 3 3.5 SL Yes FDD / SA T A HDD 4 3.5 SL Yes SA T A HDD / SCSI HDD/ SAS HDD 5 3.
Chapter 1. IntelliStat ion M Pro 6218 11 IntelliStation M Pro 6218 I/O options IntelliStation M Pro 62 18 power and accessories SBB Number Option Number Feature Code Description Adapter Length PCI Sup.
12 COG IntelliStation M Pro 6218 tape options SBB Number Option Number Feature Code Description Monitors 25R4183 49387NX 7601 IBM C1 17 17" (15.9inch VIS) FST CRT 25R4186 494215X 7604 IBM T1 15 15" TFT LCD 25R4188 494317X 7606 IBM T1 17 17" TFT LCD 25R4190 494419X 7608 IBM T1 19 19" TFT LCD 25R4192 494520X 7610 IBM T120 20.
Chapter 1. IntelliStat ion M Pro 6218 13 SBB Number Option Number Feature Code Tape Drives Bays Supported 1 Storage Interface Form Factor Ext Tape Encl 49P3228 48P7042 5354 20/40GB T R7 Internal IDE Tape Drive 2 Std. IDE 89mm (3.5in) SL or 133mm (5.25in) HH - 32P8861 00N7991 5353 20/40GB DDS/4 4mm Internal Tape Drive 2 Ultra2 (16-bit) 89mm (3.
14 COG.
© Copyright IBM Cor p. 2003, 2006 15 Chapter 2. IntelliStation Z Pro 6223 IntelliStation Z Pro (6223) pr ovides six USB ports (two front/four re ar), two IEEE 1394A ports (one f ront/one rear), two 9-pin se rial ports and one 25-pin parallel port. A keyboard and mouse is also provided.
16 COG 6223- 52Y - 3.4/800 2MB L2 2 / 2 1GB/ 16GB 3DLabs Wildcat Realizm 800 Mini- tower 1GB U320 Fixed SCSI 73GB/ 587.2GB CD-RW/DVD (48x-32x-48x- 16x) 6 / 4 6 / 5 6223- 53Y 11 - 3.4/800 2MB L2 2 / 2 2GB/ 16GB NVIDIA Quadro FX 1400 Mini- tower 1GB SA T A Fixed SA T A 80GB/ 1000GB CD-RW/DVD (48x-32x-48x- 16x) 6 / 4 6 / 5 6223- 64Y - 3.
Chapter 2. IntelliStati on Z Pro 6223 17 6223- 5BY - 3.4/800 2MB L2 1 / 2 2GB/ 8GB NVIDIA Quadro FX 1400 Mini- tower 1GB U320 Fixed SA T A 73GB/ 587.3GB CD-RW/DVD (48x-32x-48x- 16x) 6 / 4 6 / 5 6223- 5CY -D u a l 3.4/800 2MB L2 1 / 2 2GB/ 8GB NVIDIA Quadro NVS 285 Mini- tower 1GB U320 Fixed SCSI 73GB/ 587.
18 COG Notes: 1. Model numbers provide d are worl dwide gene rally available variant (GA V) model number which are not orde rable as listed and need to be modified by co untry. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 2. IntelliStati on Z Pro 6223 19 IntelliStation Z Pro 6223 memory options Notes: 1. Quantity two of each SBB PN must be order ed to equal its cor responding option. 2. Supports Chipkill . Mixing Chipkill DIMMs with nonC hipkill DIMMs will disable all Chipkill function.
20 COG Figure 3. Z Pro 6223 Syste m Board Table 6. Standard Mem ory Configuration Model Std. DIMM Configuration 10Y 2 x 256MB PC2-3200 ECC DDR2 SDRAM RDIMM 1 1Y, 12Y, 14Y, 2xY except 27Y, 31Y, 41Y, 42.
Chapter 2. IntelliStati on Z Pro 6223 21 IntelliStation Z Pro 6223 hard disk drive (HDD) and optical storage options Notes: 1. May require removing standard devices. 2. Four SA T A HDDs are supported with the installati on of the optional Serv eRAID-7t cont roller.
22 COG Notes: 1. Standard HDD is installe d in bay 6. Figure 4. Z Pro 6223 Fron t View IntelliStation Z Pro 6223 Bay Usage Bay Form Fa ctor Height Front Access Usa ge 1 133mm (5.25in) HH Yes Optical 2 133mm (5.25in) HH Yes Optical/Tape/Zip 3 89mm (3.25in) SL Yes FDD/HDD 4 .
Chapter 2. IntelliStati on Z Pro 6223 23 IntelliStation Z Pro 6223 I/O options Notes: 1. Currently only one type of RAID is supported at a time; for example, Se rveRAID-7e (RAID-0 or RAID-1 with integ rated controller ), Se rveRAID-4Lx or ServeRAID -7t, etc.
24 COG Figure 5. Z Pro 6223 Rear View.
Chapter 2. IntelliStati on Z Pro 6223 25 IntelliStation Z Pro 62 23 power and accessories Notes: 1. IntelliStation Z Pro 6223 includes a 530w volt age-sensing power supply and a single line co rd.
26 COG Notes: 1. IntelliStation Z Pro 6223 ships standard with an IBM 104 -key keyboard and three-button mouse. SBB Number Option Number SBB Number Description Racks - 93061RX - NetBay1 1 Standard Rac.
Chapter 2. IntelliStati on Z Pro 6223 27 IntelliStation Z Pro 6223 tape options Notes: 1. Installation may require removing a standard device. SBB Number Option Number Tape Drives Bays Supported 1 Int.
28 COG.
© Copyright IBM Cor p. 2003, 2006 29 Chapter 3. IntelliStation Z Pro 9228 Table 7. IntelliStation Z Pro 9228 At-A-Glance Part Number 1 CPU/FSB Speed (GHz/MHz) - Cache Number of Proces sors (Std/Max) .
30 COG Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 3. IntelliStati on Z Pro 9228 31 IntelliStation Z Pro 92 28 processor options Notes: 1. If 1 CPU only, install in CPU1 location 2. When installing CPU2, inst all CPU2 V RM module also. IntelliStation Z Pro 9228 memory options Notes: 1. DIMMs must be populated in pairs and should be populated from largest to smallest i.
32 COG Figure 6. Z Pro 9228 memor y DIMMs.
Chapter 3. IntelliStati on Z Pro 9228 33 IntelliStation Z Pro 9228 hard disk drive (HDD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty Diskette Drives 0005309 40K1692 5309 1.
34 COG Figure 7. Z Pro 9228 fro nt view Bay Form Fa ctor Height Front Access Usage 1 5.25 inch - N/A CD ROM 2 5.25 inch - N/A CD/Tape 3 Diskette Drive - N/A Diskette 43 . 5 i n c h S L Y H D D 53 . 5 i n c h S L Y H D D 63 . 5 i n c h S L Y H D D 73 .
Chapter 3. IntelliStati on Z Pro 9228 35 IntelliStation Z Pro 9228 I/O options Notes: 1. The SAS daug hter card is required for all SAS configurations (non-RAID or RAID) when the SAS HBA controller is not installed in an expansion slot.
36 COG IntelliStation Z Pro 92 28 power and accessories SBB Number Option Number Feature Code Description Power Supplies and Po wer Cord Options Power Distribution Units - 32P1751 - 30amp/125V Front-e.
Chapter 3. IntelliStati on Z Pro 9228 37 - 93072SX - IBM 25U Standard Rack - 93074EX - IBM 42U Standard Rack Extension - 93074RX - IBM 42U Standard Rack - 93074SX - IBM 42U Standard Rack - 93074XX - I.
38 COG.
© Copyright IBM Cor p. 2003, 2006 39 Chapter 4. IntelliStation A Pro 6217 IntelliStation A Pro 6217 also provides an integrated Broadcom 5703ci Gb Ethernet controller (WOL, ASF2.0), five USB ports (th ree rear / two front), two 9-pin se rial ports, two IEEE 1394A po rts (one front/one rear) and one 25-pin parallel port.
40 COG 6217 -22Y 250- 1MB L2 1 / 2 2GB/ 16GB nVIDIA Quadro FX 1400 Mini- Tower 1GB SA T A Fixed SA T A 80GB/ 1000GB 7 48X/32X/48X/ 16X Max CD- RW/DVD- ROM 1 / 4 6 / 4 5 / 4 6 / 5 6217 -21Y 250- 1MB L2.
Chapter 4. IntelliStatio n A Pro 6217 41 6217 -47Y 254- 1MB L2 2 / 2 8GB/ 16GB nVIDIA Quadro FX 4500 PCIExpress Mini- Tower 1GB U320 Fixed SCSI 73GB/ 1200GB 8 48X/32X/48X/ 16X Max CD- RW/DVD- ROM 1 / .
42 COG Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 4. IntelliStatio n A Pro 6217 43 IntelliStation A Pro 62 17 processor options Notes: 1. Installing a second CPU provides fo ur additional memory DIMM slots fo r a total of eight. Each CPU card must have at least one pair of memory installed, memo ry must be installed in pairs.
44 COG IntelliStation A Pro 6217 memory options Notes: 1. The memory must be installed in pairs across channels. SBB Number Option Number Feature Code Description Memory DIMMs 1, 2 22P9270 73P2269 051 1 2GB DDR PC2700 RDIMM (512Mbit) 73P3240 38L5221 0525 1GB PC3200 CL2.
Chapter 4. IntelliStatio n A Pro 6217 45 Figure 8. A Pro 621 7 system board.
46 COG IntelliStation A Pro 6217 hard disk drive (HDD) and optical storage options Notes: 1. Up to four SA T A HDDs are supported with the in stallation of the optional Se rveRAID-7t SA T A RAID controller. 2. Mixing of different HDD technologies is supported.
Chapter 4. IntelliStatio n A Pro 6217 47 Notes: 1. The installation o rder fo r adding additional HDDs depends upon the A Pro model. For SCSI models, install all additional SCSI HDDs, then install any SA T A HDDs. For SA T A models, install all addit ional SA T A HDDs, then install any SCSI HDDs.
48 COG IntelliStation A Pro 6217 I/O options Notes: 1. IntelliStation A Pro 6217 Models with the 3DLa bs Wildcat Realizm 800 PCIExp ress Video Adapter installed will not have access to PCI slot 4. 2. All Models provide an integrated Intel gigabi t Ethernet controlle r that supports WOL and ASF.
Chapter 4. IntelliStatio n A Pro 6217 49 IntelliStation A Pro 62 17 power and accessories Notes: 1. For runtimes and UPS attributes, s ee Appendix C: UPS Runtime Estimate. IntelliStation A Pro 6217 tape options SLOT/device Type Bus Voltage (V) Frequency MHz Slot length PCI Slot 1 PCI-X O3 3.
50 COG.
© Copyright IBM Cor p. 2003, 2006 51 Chapter 5. xSeries 100 Table 1 1. xSeries 100 At-A-Glance Part Number 1 Withdrawal Date 2 CPU/FSB Speed (GHz/MHz) - Cache Number of Proc essors (Std/Max) Memory (.
52 COG 8486- EDY - Pentium 4 631 3.0/800 - 2MB EM64T 1 / 1 512MB /8GB Tower 1 / 1 - N 1Gb SA T A Fixed 80GB/ 500GB Combo 5 / 3 4 / 4 8486- EEY - Pentium 4 631 3.0/800 - 2MB EM64T 1 / 1 512MB /8GB Tower 1 / 1 - N 1Gb SA T A Fixed 80GB/ 500GB Combo 5 / 3 4 / 4 8486- EFY - Pentium 4 641 3.
Chapter 5. xSeries 1 00 53 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
54 COG xSeries 100 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty Diskette Drives 0005309 40K1692 5309 IBM USB Porta.
Chapter 5. xSeries 1 00 55 Figure 1 1. xSeries 100 front view xSeries 100 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug Capable Max .
56 COG Notes: 1. Supports tape backup solutions. xSeries 100 powe r and accessories Notes: 1. Uninterruptible Power Supplies are not su pported on Red Hat Ente rprise Linux 4.
Chapter 5. xSeries 1 00 57 xSeries 100 tape options Option Number Description Rack Console Connectivity 17351LX 1x8 Local Console Manager 17351GX 2x8 Local Console Manager 17352LX 2x16 Local Console M.
58 COG Notes: 1. This tape drive contains the following options: opti on part number of single drive - 39M5656 and option part number 5 Pack DDS Gen 5 (36/72 GB) Tape Media - 71P9158.
© Copyright IBM Cor p. 2003, 2006 59 Chapter 6. xSeries 206m Table 13. xSeries 206m At-A-Glance Part Number 1, 2 Withdrawal Date 3 CPU/FSB Speed (GHz/MHz) - Cache Number of Proc essors (Std/Max) Memo.
60 COG 8485- A2Y - 2.8/800- 1MB L2 1 / 1 512MB/ 8GB Tower 1 / 1 -N 1 G B S A T A S i m p l e - Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 4 / 4 8485- B2Y - 3.0/800- 2MB L2 1 / 1 512MB/ 8GB Tower 1 / 1 -N 1 G B S A T A S i m p l e - Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 4 / 4 8485- B4Y - 3.
Chapter 6. xSeries 206m 61 8485- J2Y - 3.2/800- 4MB DC L2 1 / 1 1GB/ 8GB Tower 1 / 1 P H N1 G BS A T A /SAS Hot- Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 6 / 6 8485- J4Y - 3.2/800- 4MB DC L2 1 / 1 1GB/ 8GB Tower 2 / 2 P H N1 G BS A T A /SAS Hot- Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 6 / 6 8485- K2Y - 3.
62 COG 8490- 7A Y - 2.8/800 - 2x1MB L2 1 / 1 512MB/ 8GB Tower 1 / 1 -N 1 G B S A T A S i m p l e - Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 4 / 4 8490- 8A Y - 3.0/800 - 2x1MB L2 1 / 1 512MB/ 8GB Tower 1 / 1 P H N1 G BS A T A /SAS Hot- Swap 0GB/ 2TB 48X-20X CD-ROM Black Internal IDE Drive 4 / 3 6 / 6 8490- A2Y - 2.
Chapter 6. xSeries 206m 63 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
64 COG 3. Not available from IBM after this date. Bu siness Partne r Inventory may be available. 4. Maximum 8GB of memory is suppo rted via four DIMM slots with current ly available opt ions.
Chapter 6. xSeries 206m 65 Notes: 1 . A m a x i m u m o f 8 G B o f m e m o r y i s s u p p or t e d u s i n g t h e f o u r D I M M s l o t s w i t h c u r r e n t l y a v a i l a b l e o p t i o n s .
66 COG xSeries 206m hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty Diskette Drives 23K4959 05K9276 5300 IBM USB Portable Diskette Drive - - - SAS Hard Drives 1 40K1071 40K1039 5163 73GB 10K 3.
Chapter 6. xSeries 206m 67 Notes: 1. Mixing of diffe rent HDD technologi es (SA T A and SA S) is not supported. 2. The xSeries 206m IDE controlle r supports a maximum of two “parallel” IDE devices.
68 COG Figure 13. x206m fr ont view Bay Form Factor Height Front Access Usage 1 133mm (5.25in) HH Yes Std. Optical 2 133mm (5.25in) HH Yes Optical/Tape/Special bid HD 3 89mm (3.5in) SL Yes Floppy 4 89mm (3.5in) SL Yes Std. HDD 5 89mm (3.5in) SL Yes HDD 6 89mm (3.
Chapter 6. xSeries 206m 69 xSeries 206m I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug Capable Max Supported Storage Controllers 02R0.
70 COG SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug Capable Max Supported Storage Controllers 02R0995 32P0033 1654 IBM ServeRAID-6M Ultra320 SC.
Chapter 6. xSeries 206m 71 Notes: 1. Support is for SCSI tape drives.bye 2. PCI slots 5 and 6 will only be av ailable if SBB 25R7432 is selected. - 31P9601 - PRO/1000 M T Server Ethernet Adapt er -- -.
72 COG Figure 14. x206m re ar view.
Chapter 6. xSeries 206m 73 Figure 15. x206m system bo ard SLOT/device Type Bus Voltage (V) Frequency MHz Data Path Active PCI? (Hotswap) Slot length PCI Slot 1 PCI-Express x 8 - - - - - - PCI Slot 2 P.
74 COG xSeries 206m power and accessories SBB Number Option Number Feature Code Description Power Distribution Units - 26K4241 - DPI 32A Single Phase C13 Ente rprise PDU w/ IEC309 2P+N+G (250V) line c.
Chapter 6. xSeries 206m 75 Notes: 1. Converts KVM sig nals fo r CA T5 cabling for se rvers with PS/2 KVM po rts. Rack/Tower Conversion Kits - 39Y9707 - 5Ux20D Tower to Rack Conve rsion Kit Rack Consol.
76 COG xSeries 206m tape options SBB Number Option Number Feature Code Description Bays Supported Storage Interface Form Factor Ext Tape Encl Tape Drives 1 39M5664 39M5659 5385 IBM DLTV4 Tape Drive - - - - 71P9176 39M5656 5355 36/72GB DDS Generation 5 Tape Drive 2U l t r a 2 (16-bit) 89mm (3.
Chapter 6. xSeries 206m 77 - 87651UX - IBM 1U Rackmount Tape Enclosure -- - - - 8767HHX - IBM Half High Tabletop Tape Enclosure -- - - - 8768FHX - IBM Full High Tabletop Tape Enclosure -- - - Associat.
78 COG Notes: 1. If two optical drives are se lected, a tape drive cannot be selected. If a tape drive is selected then always install in bay 2. If a SCSI tape d rive is selected , select SBB 13N2252, IBM Ultra320 SCSI Controller 2.
© Copyright IBM Cor p. 2003, 2006 79 Chapter 7. xSeries 226 Table 15. xSeries 226 At-A-Gla nce Part Number 1 Withdrawal Date 2 CPU/FSB Speed (GHz/MHz) - Cache 3 Processor Quantity (Std/Max) Memory (S.
80 COG 8648- 34Y 11 - 2.8/8002 MB L2 1 / 2 512MB/ 16GB Tower 1 / 1 H-1 G B D u a l U320 Hot- swap 0GB/ 1.8TB CDROM (48x-20x) 9 / 7 6 / 6 8648- 36Y 11 - 2.8/800 2MB L2 1 / 2 512MB/ 16GB Tower 2 / 2 H-1 G B D u a l U320 Hot- swap 0GB/ 1.8TB CDROM (48x-20x) 9 / 7 6 / 6 8648- B2Y 11 - 3.
Chapter 7. xSeries 2 26 81 8488- 4BY - 3.0/800 2MB L2 1 / 2 512MB/ 16GB Tower 2 / 2 P H - 1GB Dual U320 Hot-swap 0/ 1.8TB C D - R O M (48x-20x) 9 / 7 6 / 6 8488- 5BY - 3.2/800 2MB L2 1 / 2 512MB/ 16GB Tower 2 / 2 P H - 1GB Dual U320 Hot-swap 0/ 1.8TB C D - R O M (48x-20x) 9 / 7 6 / 6 8488- 6BY - 3.
82 COG Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 7. xSeries 2 26 83 Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. 25R7356 25R8900 0380 3.0GHz/800MHz 2MB L2 Cache, Xeon Processo r 4xY 25R7357 25R8901 0382 3.
84 COG xSeries 226 me mory op tions SBB Number 1 Option Number Feature Code Memory Options 90P0870 - 0501 256MB PC2-3200 CL3 ECC DDR-2 SDRAM RDIMM - 73P3523 - 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM K.
Chapter 7. xSeries 2 26 85 Notes: 1. Quantity two of each SBB PN must be order ed to equal its cor responding option. 2. If xSeries 226 comes standard with a single 5 12MB DIMM, a single 512MB DIMM (P/N 90P1218) m ust be added to slot 2 before adding mo re memory.
86 COG Figure 16. xSeries 226 System Boar d xSeries 226 internal cabling Hot-swap SC SI models xSeries 226 hot-swap SCSI models are cabled internally with a single, 1-drop LVD SCSI cable, connecting one channe l of th e integ rated, dual-channel Ultra320 SCSI controller to the hot-swap backplane.
Chapter 7. xSeries 2 26 87 xSeries 226 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported 1 Max Qty 2 SA T A HDDs 3 40K6873 40K6872 5173 250GB 7.2K rpm SA T A HDD SL 4 ... 7 4 90P1398 40K6864 5206 80GB 7200 RPM Serial A T A with EZ tray SL 4 .
88 COG External Storage Expansion Units 4 Form Factor 39R6615 17331RU - EXP400 Storage Ex pansion Unit Rack (3U) - 17401RU - FAStT EXP700 Storage Expansion Unit Rack (3U) - 1 724100 - FAStT100 Storage.
Chapter 7. xSeries 2 26 89 Notes: 1. May require removing standard devices. 2. Four SA T A HDDs are supported wi thin the ins talla tion of the optional ServeRAID-7t controller. Two HDDs are supported in th e st andard configurat ion. 3. Mixing SA T A and SC SI HDDs is not supported.
90 COG Figure 17. xSer ies 226 fron t view (SCSI) Figure 18. xSeries 226 front view (SA T A) Ba y 1 Ba y 2 Ba y 3 Ba y 5 Ba y 6 Ba y 7 Ba y 8 Ba y 9 Ba y 4.
Chapter 7. xSeries 2 26 91 xSeries 226 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot-Plug Capable 1 Storage Controllers 2 39R8819 39R8815.
92 COG 25P2889 06P3601 1526 10/100 Ethe rnet Serve r Adapter - - - - 31P9605 39Y6105 1512 PRO/1000 MT Serve r Ethernet Adapter by Intel Half 64-bit/ 133MHz 4 ... 6 - 39Y6082 39Y6079 1478 NetXtreme 1000 T + Ethernet Adapter Half 64-bit/ 133MHz 4 ... 6 - 30R5205 30R5201 1483 IBM iSCSI Serve r TX Adapter Half 64-bit/ 133MHz 4.
Chapter 7. xSeries 2 26 93 Notes: 1. xSeries 226 doe s not have any Active-PCI slots. 2. Currently only one type of RAID is supported at a time; for example, Se rveRAID-7e (RAID-0 or RAID-1 with integ rated controller ), Se rveRAID-4Lx or ServeRAID -7t, etc.
94 COG Figure 19. xSeries 226 rear view.
Chapter 7. xSeries 2 26 95 xSeries 226 powe r and accessories Notes: 1. Nonredundant power models include a single 530w nonhot-swap power supply and line cord. Redundant power model s include two 51 4w power supplies and two line cords. 2. For runtimes and UPS attributes, see Appe ndix C: UPS Runtime Estimate (minut es).
96 COG SBB Number Option Number Feature Code Description Racks - 93061RX - NetBay1 1 Standard Rack Cabinet - 9306250 - NetBay25 Standard Rack Cabinet - 9306420 - NetBay42 Standard Rack Cabinet - 93084.
Chapter 7. xSeries 2 26 97 Keyboard and Mouse 02R3206 31P7415 8800 Preferred Pro Full-size Keyboard - 104 Keys, business black - 31P8950 - USB Keyboard with UltraNav - US English 1 42C1473 40K5372 869.
98 COG Notes: 1. USB accessories are not compatible with the NetBay console switches. They attach to a single USB- capable serve r. 2. Includes a 15in flat panel monitor.
Chapter 7. xSeries 2 26 99 xSeries 226 tape options SBB Number Option Number Feature Code Tape Drives Bays Supported 1 Storage Interface Form Factor Ext Tape Encl 39M5664 39M5659 5385 IBM DLTV4 Tape D.
100 CO G SBB Number Option Number Feature Code Tape Drives Bays Supported 1 Storage Interface Form Factor Ext Tape Encl 49P3228 48P7042 5354 20/40GB T R7 Internal IDE Tape Drive 2 Std. IDE 89mm (3.5in) SL or 133mm (5.25in) HH - 32P8861 00N7991 5353 20/40GB DDS/4 4mm Internal Tape Drive 2 Ultra2 (16-bit) 89mm (3.
Chapter 7. xSeries 226 101 Notes: 1. Installation may require removing a standard device..
102 CO G.
© Copyright IBM Cor p. 2003, 2006 103 Chapter 8. xSeries 236 Table 17. xSeries 236 At-A-Gla nce Part Number 1 Withdrawal Date 2 CPU/FSB Speed (GHz/MHz) - Cache 3 Processor Quantity (Std/Max) Memory (.
104 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 8. xSeries 236 105 3. Intel Xeon processor with Extended Me mory 64 Technology (EM64T), L2 cache and an 800MHz (quad- pumped) Front Side Bus (FSB). 4. High-speed, two-way inte rleaved PC2-3200 RDI MMs. Maximum capacity requ ires replacing the standard DIMMs with 2GB DIMMs.
106 CO G xSeries 236 me mory op tions Notes: 1. Quantity two of each SBB PN must be order ed to equal its cor responding option. 2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipki ll DIMMs will disable all Chipki ll function.
Chapter 8. xSeries 236 107 Figure 20. xSeries 236 system boar d xSeries 236 internal cabling xSeries 236 models are cabled internally with a single, 1-drop LVD SCSI cable, connecting one channel of the integrated, dual channel Ultra320 SCSI controlle r to the hot-swap backplane.
108 CO G xSeries 236 hard disk drive (H DD) and optical storage options Notes: 1. Bays 1 and 2 can be conve rted to support th re e additional HDDs fo r a total of nine HDDs. 2. Maximum quantity of supported HDDs requires instal lation of the optical Ultra320 3-Pack HDD kit.
Chapter 8. xSeries 236 109 Notes: 1. Bays 1 and 2 can be combined to suppor t one full-high device. 2. The optional Ultra320 3-Pack HDD Kit converts bays 1 and 2 into th ree additional hot-swap HDD bays. Figure 21. xSeries 236 Fron t View Bay Form Factor Height Front Access Usag e 1 1 133mm (5.
110 CO G xSeries 236 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug Storage Controllers 02R0995 39R8815 1654 ServeRAID-6M Controller .
Chapter 8. xSeries 236 111 Notes: 1. Ultra320 Internal Single-drop 24” LVD SCSI Cable opti on is required when connecting inte rnal HDDs to ServeRAID-6M adapte rs. 2. Installs into a dedicated slot. Does not consume a PCI slot. Quantity one allowed.
112 CO G xSeries 236 powe r and accessories Notes: 1. xSeries 236 ships with a single 670w hot-swap ca pable powe r supply and line cord. A second hot-swap power supply is optional fo r redundancy. 2. Does not ship with a line cord. 3. For runtimes and UPS attributes see Appendix C: UPS Runtime Est imate.
Chapter 8. xSeries 236 113 Notes: 1. Rack kit is 24in d eep. SBB Number Option Number Feature Code Description Racks - 93061RX - NetBA Y1 1 Standard Rack Cabinet - 93072RX - IBM 25U Standard Rack - 93.
114 CO G 2. USB accessories are not compatible with the NetBay console switches. They attach to a single USB- capable serve r. 3. Includes a 15in flat panel monitor. 4. Installation within a rack req uires optional keyb oard tray (P/N 28L4707). This keyboard cannot share a keyboard tray w ith a flat panel display.
© Copyright IBM Cor p. 2003, 2006 115 Chapter 9. xSeries 306m Table 19. xSeries 306m At-A-Glance Part Number 1, 2 Withdrawal Date 3 CPU/FSB Speed (GHz/MHz) - Cache Processor Quantity (Std/Max) Memory.
116 CO G 8849- G2Y - Intel Pentium D Processo r 920 (2.8GHz/4MB) Dual Core 1 / 1 1GB /8GB Rack (1U) 1 / 1 -N D u a l 1Gb SA T A Simple -Swap 0GB/ 500GB CDROM 24x-10x 2 / 2 2 / 2 8849- G4Y - Intel Pentium D Processo r 920 (2.
Chapter 9. xSeries 306m 117 8491- 10Y -I n t e l P e n t i u m 4 Processor 531 with EM64T (3.0 GHz 1M L2) 1 / 1 512MB /8GB Rack (1U) 1 / 1 -N D u a l 1Gb SA T A Simple -Swap 0GB/ 500GB CDROM 24x-10x 3 / 2 2 / 2 8491- 1A Y -I n t e l P e n t i u m 4 Processor 531 with EM64T (3.
118 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 9. xSeries 306m 119 xSeries 306m memory options Notes: 1. The serve r comes with one 512 MB DIMM installed in DIMM connector 1. If one DIMM is installed when you install an additional DIMM, it must be installed in DIMM connector 3 and it must be the same size, speed, type, and technology as the DIMM that is in stalled in DIMM connector 1.
120 CO G xSeries 306m hard disk drive (H DD) and optical storage options Notes: 1. Mixing of diffe rent HDD technologies is not supported. SBB Number Option Number Feature Code Description Height Bays Supported Maximum Quantity Hot-Swap SAS HDDs 1 40K1071 40K1039 5163 73GB 10K 3.
Chapter 9. xSeries 306m 121 xSeries 306m I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Storage Controllers 39R8809 39R8805 1683 ServeRAID 7t .
122 CO G Notes: 1. The optional ServeRAID -7t SA T A controller can be in stalled only in PCI-X slot 2. The low-profil e bracket that comes with the controller is required to install the controller.
Chapter 9. xSeries 306m 123 xSeries 306m power and accessories Option Number Power Power Distribution Units 26K4241 DPI 32A Single Phase C13 Enterprise PDU w/ IEC309 2P+N+G (250V) line co rd 26K4242 D.
124 CO G Notes: 1. Converts KVM sig nals fo r CA T5 cabling for se rvers with PS/2 KVM po rts. SBB Number Option Number Feature Code Description Rack Console Connectivity - 17351LX - 1x4 port Console .
Chapter 9. xSeries 306m 125 xSeries 306m tape options Notes: 1. This option contains: option part number of sing le drive - 39M5656 and option part numbe r 5 Pack DDS Gen 5 (36/72 GB) Tape M edia - 71P9158.
126 CO G.
© Copyright IBM Cor p. 2003, 2006 127 Chapter 10. xSeries 336 The xSeries 336 is housed in a 19in rack-mountable d raw er and also provides th ree USB ports (one front, two rear), one 9-pin se rial port, keyboa rd port, mouse port, video port and an integr ated A TI Radeon 7000M graphi cs controlle r with 16 MB of video memo ry.
128 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 10. xSeries 336 129 9. Capacities are based on installation of two 3.5-in 14 6 GB Ultra320 or four 2.5-in 73 GB Ultra320 HDDs (SCSI models) or two 160 GB SA T A HDDs (SA T A models). xSeries 336 processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two.
130 CO G xSeries 336 me mory op tions Notes: 1. Quantity two of each SBB PN must be order ed to equal its cor responding option. 2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipki ll DIMMs will disable all Chipki ll function.
Chapter 10. xSeries 336 131 Figure 24. xSeries 336 system boar d xSeries 336 internal cabling Hot-swap SC SI models xSeries 336 hot-swap SCSI models are cabled internally with a single, 1-drop LVD SCSI cable, connecting the integrated sing le-channel Ultra320 SCSI controlle r to the hot-swap backplane.
132 CO G xSeries 336 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported 1 Max Qty Diskette Drives - 40K1692 - USB Portable Diske.
Chapter 10. xSeries 336 133 Notes: 1. Installation may require removing st andard devices. 2. Mixing SA T A and SC SI HDDs is not supported. 3. These HDDs are offe red for machine type 8837-E3Y. 4. Small Fo rm Factor (SF F) HDDs are 2. 5in wide and cannot be mixed with the 3.
134 CO G Figure 26. xSeries 336 Fron t View xSeries 336 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot- Plug 1 Storage Controllers 39R8797.
Chapter 10. xSeries 336 135 Notes: 1. xSeries 336 doe s not have any Active-PCI slots. 2. Support is fo r tap e only. Tape suppo rt requires the PC I slot in which the adapter is installed be defined as the boot device slot via the BIOS setup utility.
136 CO G xSeries 336 powe r and accessories Option Number Description Power 1 90P5280 585w Hot-Swap Power Supply Power Distribution Units 39Y8923 DPI 60A Three Phase C19 Ente rprise PDU w/ IEC3 09 3P+.
Chapter 10. xSeries 336 137 Notes: 1. xSeries 336 ships with a single 585w hot-swap capabl e powe r supply, a rack power cable and line cord. A second hot-swap power supply is optional fo r redundancy. 2. The power supply ships with a single 2.8m rack po wer Y-cable which replace s the system’s standard power cable.
138 CO G Notes: 1. USB accessories are not compatible with the NetBay console switches. They attach to a single USB- capable serve r. 2. Includes a 15in Flat Panel Monitor.
Chapter 10. xSeries 336 139 xSeries 336 tape options Notes: 1. This option contains: option part number of sing le drive - 39M5656 and option part numbe r 5 Pack DDS Gen 5 (36/72 GB) Tape M edia - 71P9158.
140 CO G.
© Copyright IBM Cor p. 2003, 2006 141 Chapter 1 1. xSeries 346 The xSeries 346 is housed in a 19in rack-mountable d raw er and also provides th ree USB ports (one front, two rear), one 9-pin se rial .
142 CO G 8840-0RY - 2.8/ 800 2MB L2 1 / 2 1GB / 16GB Rack (2U) 1 / 2 P H F YD u a l 1Gb D u a l U320 Hot- swap 0/1800G B CD/DVD R/W (24x) 8 / 6 4 / 4 8840-1RY - 3.0/800 2MB L2 1 / 2 1GB / 16GB Rack (2U) 1 / 2 P H F YD u a l 1Gb D u a l U320 Hot- swap 0/1800G B CD/DVD R/W (24x) 8 / 6 4 / 4 8840-1SY - 3.
Chapter 11. xSeries 346 143 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
144 CO G xSeries 346 me mory op tions Notes: 1. Quantity two of each SBB PN must be order ed to equal its cor responding option. 2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipki ll DIMMs will disable all Chipki ll function.
Chapter 11. xSeries 346 145 Figure 28. xSeries 346 system boar d xSeries 346 internal cabling xSeries 346 models are cabled internally with a single, 1-drop LVD SCSI cable, connecting one channel of the integrated, dual-channel Ultra320 SCSI con troller to the hot-swap backplane.
146 CO G xSeries 346 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported 1 Max Qty Floppy Drives -- - - - - - Hot-swap Ultra320 HDDs 90P1329 40K1023 5202 73.4GB 10K rpm Ultra320 SCSI Hot-Swap SSL HDD - 1 .
Chapter 11. xSeries 346 147 Notes: 1. Installation may require removing st andard devices. 2. These HDDs are suppo rted on machine type 8840-E2Y. 3. All models ship standard with an 8X Max DVD-ROM drive. 4. An optional SCSI, RAID or Fibre controller is required in order to attach to the system.
148 CO G xSeries 346 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug 1 Storage Controllers 39R8819 39R8816 1686 Se rveRAID-6M Controll.
Chapter 11. xSeries 346 149 Notes: 1. xSeries 346 doe s not have any Active-PCI slots. 2. Supported fo r ext ernal attachment only and not fo r in ternal HDDs. A se cond controlle r is only suppo rted if the integrated SCSI controller is disabled or a Se rveRAID-7K is installed.
150 CO G xSeries 346 powe r and accessories Notes: 1. Non-redundant powe r models ship with a single 625w hot-swap capable power supply, a rack powe r cable and a line cord. Redundant powe r models ship with quantity two of each. A second hot-swap power supply is optional fo r non-redundant power models.
Chapter 11. xSeries 346 151 Notes: 1. USB accessor ies are not compatible with the NetBA Y console switches. They attach to a s ingle USB- capable serve r.
152 CO G xSeries 346 tape options Option Number Tape Drive Bays Supported Storage Interface Form Factor Ext Tape Encl -- - - - Tape Autoloaders 87691VX 1U VXA-320 Tape Autoloader - - - - External Tape.
© Copyright IBM Cor p. 2003, 2006 153 Chapter 12. System x3400 (7973, 7974) Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.
154 CO G System x3400 (7973, 797 4) processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. System x3400 (7973, 797 4) memory options Notes: 1.
Chapter 12. System x34 00 (7973, 7974) 155 System x3400 (7973, 7974) hard disk drive (HDD ) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Maximum Quantity SA T A Simple-Swap HDDs 39M4501 39M4500 5290 80GB 7200 RPM 3.
156 CO G System x3400 (7973, 7974) I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot-Plug Capable Storage Controllers 39R8752 39R8743 1680 IBM Ultra320 SCSI Controlle r 2 - - - - Networking 30R5205 30R5201 1483 IBM iSCSI Se rver TX Adapte r - 32/64 bit 4….
Chapter 12. System x34 00 (7973, 7974) 157 System x3400 (7973, 7974) power and accessories Option Number Description Power -- Power Distribution Units 39Y8905 DPI NEMA Rack PDU 39Y8923 DPI 60A Three P.
158 CO G Option Number Description Rack and NetBA Y 93072RX IBM 25U Standard Rack 93074RX IBM 42U Standard Rack 93074XX IBM 42U Standard Rack Extension 93084RX NetBA Y42 Enterprise Rack Cabinet 93084X.
Chapter 12. System x34 00 (7973, 7974) 159 System x3400 (7973, 7974) tape options SBB Number Option Number Feature Code Tape Drive Bays Supported Storage Interface Form actor Ext Tape Enclosures 39M5621 25R0005 5364 IBM Half High LTO Gen 2 Tape Drive 2.
160 CO G.
© Copyright IBM Cor p. 2003, 2006 161 Chapter 13. System x3400 (7975, 7976) Table 28. System x340 0 (7975, 7976) At-A -Glance Part Number 1 CPU/FSB Speed (GHz/MHz)-Cache Number of Processors (Std/Max.
162 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclatu re: xxU. Fo r example, the U.
Chapter 13. System x34 00 (7975, 7976) 163 System x3400 (7975, 797 6) processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. System x3400 (7975, 797 6) memory options Notes: 1.
164 CO G SBB Number Option Number Feature code Memory Description 1, 2 Memory Cards 13M7285 13M7409 4219 4-DIMM DDR2 MEMORY CARD 3 Memory DIMMs 73P2873 0503 512MB PC2-3200 CL3 ECC DDR-2 SDRAM RDIMM 73.
Chapter 13. System x34 00 (7975, 7976) 165 Figure 31. x3400 (7 975, 7976) system boar d Table 30. 8-DIMM Con figuration in mirrored mode Number of DIMMs DIMM Slots 4 1, 4, 7, 10 8 1, 4, 7, 10, 2, 5, 8.
166 CO G System x3400 (7975, 7976) hard disk drive (HDD ) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Maximum Quantity SA T A Hot-Swap HDDs 39M4519 39M4518 5299 80GB H ot-Swap SA T A HDD SL 4….
Chapter 13. System x34 00 (7975, 7976) 167 System x3400 (7975, 7976) I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot-Plug Capable Storage C.
168 CO G - 17001RS - TotalStorage DS400 - Single Contro ller -- - - - 17002RD - TotalStorage DS400 - Dual Contro ller -- - - - 17012RD - TotalStorage DS300 - Dual Contro ller -- - - - 1722 60U - DS430.
Chapter 13. System x34 00 (7975, 7976) 169 73P4005 73P4001 1509 NetXtreme 1000 SX Fibe r Ethernet Adapte r 2 3 Half 64-bit/ 133MHz 1 ... 6 - 73P4105 73P4101 1510 NetXtreme 1000 T Ethe rnet Adapter 2 Half 64-bit/ 133MHz 1 ... 6 - 73P4205 73P4201 1511 NetXtreme 1000 T Dual Po rt Ethernet Adapte r 2 Half 64-bit/ 133MHz 1 .
170 CO G System x3400 (7975, 7976) power and accessories Optio n Number Description Power - - Power Distribution Units 39Y8905 DPI NEMA Rack PDU 39Y8923 DPI 60A Three Phase C19 Enterpri se PDU w/ IEC3.
Chapter 13. System x34 00 (7975, 7976) 171 Option Nu mber Description Rack and NetBA Y 141042X IBM Linux Cluster Rack 93072RX IBM 25U Standard Rack 93074RX IBM 42U Standard Rack 93074XX IBM 42U Standa.
172 CO G System x3400 (7975, 7976) tape options SBB Number Option Number Feature Code Description Rack and NetBA Y - - - Refer t o Rack Cabinets and Option s section for info rmation concerning IBM racks and rack-suppo rted devices.
Chapter 13. System x34 00 (7975, 7976) 173 71P9176 71P9145 5355 36/72GB DDS Generation 5 Tape Drive 2....3 - - - Tape Autoloaders --- - - - - - External Tape Enclosur es - 45591UX - IBM 1U xSeries Tap.
174 CO G.
© Copyright IBM Cor p. 2003, 2006 175 Chapter 14. System x3500 Table 31. System x3500 At-A-G lance Part Number 1 CPU/FSB Speed (GHz/MHz)-Cache Number of Processors (Std/Max) Memory (Std/Max) Form Fac.
176 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclatu re: xxU. Fo r example, the U.
Chapter 14. Syste m x3500 177 31R3775 - 0651 Intel Xeon Processor 7020 3RY 31R3777 - 0652 Intel Xeon Processor 7040 4RY SBB Number Option Number Feature Code Processor Upgrades 1 SMP Su pport.
178 CO G System x3500 me mory optio ns Notes: 1. Pairs are not required to match . SBB Number Option Number Feature Code Memory Description Memory Cards --- - Memory DIMMs 1 39M5780 39M5782 0546 512MB.
Chapter 14. Syste m x3500 179 Table 33. 12-D IMM Configu ration in non-m irrored mode Number of DIMMs DIMM Slots 11 21 , 4 4 1, 4, 7, 10 6 1, 4, 7, 10, 2, 5 8 1, 4, 7, 10, 2, 5, 8, 1 1 10 1, 4, 7, 10, 2, 5, 8, 1 1 , 3, 6 12 1, 4, 7, 10, 2, 5, 8, 1 1, 3, 6, 9, 12 Table 34.
180 CO G Figure 32. x3500 system bo ard.
Chapter 14. Syste m x3500 181 System x3500 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Heigh t Bays Supported Maximum Quantity SA T A Hot-Swap HDDs 1 39M4519 39M4518 5299 80GB Hot-Swap SA T A HDD SL 4.
182 CO G Notes: 1. Hot-Swap SAS/SA T A HDDs are installed in the order of Bay 1 1 as standard then Bay 10, 9, 8,7,6,5,4.. System x3500 I/O options - 17226LU - DS4300 Mid ran ge Disk (6LU) Rack (3U) - .
Chapter 14. Syste m x3500 183 39Y6096 39Y6093 1489 NetXtreme 1000 T + Dual Port Ethernet Adapt er Half 32/64-bit 4 ... 6 - 39Y6101 39Y6098 1486 NetXtreme 1000 Express G Ethernet Adapter Half 8 1….
184 CO G - 17421xx - TotalSto rage DS4400 Midrange Disk System (all models) -- - - - 17421RX - DS4400 Mid range Disk System - - - - - 17241XX - TotalSto rage DS4100 Midrange Disk System (all models) -.
Chapter 14. Syste m x3500 185 PCI Slot 5 PCI-X 64-bit - - 133 - - - PCI Slot 6 PCI-32-bit - - 33 - - - RSA SL Socket - - - - - - - S e r v e R A I D --- - - - - Slot Type Bus Voltage (V) Frequency MHz.
186 CO G System x3500 powe r and accessories SBB Number Option Number Feature Code Description Power 39Y8326 39Y8487 0942 Redundant Power and Cooling Option Power Distribution Units - 39Y8905 - DPI NE.
Chapter 14. Syste m x3500 187 Option Nu mber Description Rack and NetBA Y 93072RX 25U Standard Rack 93074RX 42U Standard Rack 93074XX 42U Standard Rack Extension 93084RX NetBA Y42 Enterprise Rack Cabi.
188 CO G System x3500 tape options - 17352LX - 2x16 Local Console Manager - 17354GX - 4x16 Global Console Manager Monitors - 90P0717 - L150p 15in business black flat panel LCD monit or - 90P0726 - C17.
Chapter 14. Syste m x3500 189 SBB Number Option Number Feature Code Tape Drive Bays Supported Storage Interface Form Factor Ext Tape Enclosures - 59P6736 - 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 45594UX - 59P6744 - 200/400GB LTO Full-High Tape Drive - Ultra2 (16-bit) 133mm (5.
190 CO G.
© Copyright IBM Cor p. 2003, 2006 191 Chapter 15. System x3550 Table 35. System x3550 At-A-G lance Part Number 1 CPU/FSB Speed (GHz/MHz)-Cache Number of Proces sors (Std/Max) Memory (Std/Max) Form Fa.
192 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU . For example, the U.
Chapter 15. Syste m x3550 193 System x3550 processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. SBB Number Option Number Feature Code Initial Processor 1 SMP Support 32R2790 25R8924 0643 Xeon Processo r 5080 3.
194 CO G System x3550 me mory optio ns SBB Number Option Number Feature Code Memory Description Memory DIMMs 39M5780 - 0546 512MB PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz 39M5783 - 0542 1GB PC2-53.
Chapter 15. Syste m x3550 195 Figure 33. x3550 system bo ard.
196 CO G System x3550 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Description Heigh t Bays Supported Maximum Quantity SA T A Hot-Swap HDDs 1 39M4519 39M451.
Chapter 15. Syste m x3550 197 Notes: 1. Hot-Swap SAS/SA T A HDDs are installed in the order of Bay 1 1 as sta ndard th en Bay 10 , 9, 8,7,6,5,4.. SBB Number Option Number Feature Code Description Height Bays Supported 1 Maximum Quantity SAS HDDs 26K5658 26K5654 5241 36GB 10K 2.
198 CO G System x3550 I/O options Notes: 1. The ServeRAI D 8k SAS Controller comes standard and provides Raid 0, 1 and 10. 2. A PCI-X Riser Card must be selected when a PCI-X adapte r is selected.
Chapter 15. Syste m x3550 199 SBB Number Part Number Feature Code Description Adapter Length PCI Support Slots Supported Hot-Plug Capable 1 Storage Controllers 02R0996 02R0988 1653 ServeRAID-6M Controlle r (256MB Cache) 2 Full 64-bit/ 133MHz 1 ... 6 - 02R0995 32P0033 1653 ServeRAID-6M Controlle r (128MB Cache) 2 Full 64-bit/ 133MHz 1 .
200 CO G System x3550 powe r and accessories - 2005H08 - TotalStorage Fibre Channel Switch H08 -- - - - 2005H16 - TotalStorage Fibre Channel Switch H16 -- - - - 2006L10 - TotalStorage Sto rage Switch .
Chapter 15. Syste m x3550 201 Notes: 1. System x3500 ships with a single 670w hot-swap capa ble power supply, a rack power cable and line co rd. A second hot-swap power supply is optional for redundancy. 2. The power supply ships with a single 2.8m rack po we r Y-cable which replaces the system’s standard power cable.
202 CO G 17352GX IBM Global 2x16 Console Manager 17354GX IBM Global 4x16 Console Manager 17231RX IBM 1U 17" Flat Panel Console Kit w/ Optical Drive Bay 39M2897 IBM Long KVM Conversion Option 39M2.
Chapter 15. Syste m x3550 203 System x3550 tape options Option Number Description Bays Supported Storage Interface Form Factor Ext Tape Enclosure Tape Autoloaders 87691VX 1U VXA-320 Tape Autoloader - .
204 CO G - 17226LU - DS4300 Mid range Disk (6LU) - - - - - 1722 6LX - DS4300 Midrange Disk (6LX) - - - - - 17226XX - TotalSto rage DS4300 Midrange Disk Systems (all mod els) -- - - - 17401xx - TotalSt.
Chapter 15. Syste m x3550 205.
206 CO G.
© Copyright IBM Cor p. 2003, 2006 207 Chapter 16. System x3650 Table 36. System x3650 At-A-G lance Part Number 1 CPU/FSB Speed (GHz/MHz)-Cache Number of Processors (Std/Max) Memory (Std/Max) Form Fac.
208 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclatu re: xxU. Fo r example, the U.
Chapter 16. Syste m x3650 209 System x3650 processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. SBB Number Option Number Feature Code Processor Upgrades 1 SMP Support 40K0020 25R8927 0684 Dual-Core Intel Xeon Proces sor 5063 - 3.
210 CO G System x3650 me mory optio ns Notes: 1. A minimum of one DIMM is required. Howeve r, fo r perfo rmance, a minimum of two identical DIMMs should be populated .
Chapter 16. Syste m x3650 211 System x3650 hard disk drive (H DD) and optical storage options System x3650 I/O options SBB Number Option Number Feature Code Description Heigh t Bays Supported Maximum Quantity SAS Hot-Swap HDDs 1 40K1071 40K1039 5163 73GB 10K 3.
212 CO G Notes: 1. A PCI-X riser is required when instal ling a PCI-X adapter in eithe r slot 1 or slot 2. 2. A PCI-E riser is required when installi ng a PC I-Express adapter in eithe r slot 1 or slot 2. Notes: 1. Slots 1 and 2 required a riser compat ible to the adapte r being installed.
Chapter 16. Syste m x3650 213 Notes: 1. System x3650 ships with a single power supply. A second hot-swap powe r su pply is optional for redundancy. - 39Y8999 - 32A/230V 3P w/ IEC309 3P+N+Gnd Conn - 39.
214 CO G System x3650 tape options 17352LX IBM 2x16 Local Console Manage r 17351GX IBM 2x8 Local Console Mana ger 17351LX IBM 1x8 Local Console Manage r 31R3132 IBM 3M Console Switch Cable (USB) 39M28.
© Copyright IBM Cor p. 2003, 2006 215 Chapter 17. System x3650 T Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclatu re: xxU.
216 CO G System x3650 T pr ocessor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. System x3650 T memory options Notes: 1. A minimum of one DIMM is required.
Chapter 17. Sys tem x365 0 T 217 System x3650 T I/O options SBB Number Part Number Description Adapter Length PCI Support Slots Supported Hot-Plug Capable Storage Controllers -- - - - - - External Dis.
218 CO G.
© Copyright IBM Cor p. 2003, 2006 219 Chapter 18. System x3800 and xSeries 260 Table 38. System x3800 and xSeries 260 At-A-Glance Part Number 1 Machine Type CPU/FSB Speed (GHz/MHz) - Cache Number of .
220 CO G 8865 -4TY x3800 Intel Xeon Processor 702 0 2.67/667 2x1MB L2 Cache Dual Core 1 / 4 2GB/ 32GB Rack (7U) 2 / 3 P H F S YD u a l 1GB SAS Hot- swap 0GB/ 3600GB 16X DVD-R OM 6 / 12 16 / 14 8865 -1 TY x3800 3.
Chapter 18. System x38 00 and xSeries 260 221 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
222 CO G System x3800 and xSeries 260 processor options Notes: 1. Three additional processors may be installed, pr oviding a maximum of four. All processors must be identical in type, speed, and cache size. 1, 2, and 4 way configurations are supported.
Chapter 18. System x38 00 and xSeries 260 223 System x3800 and xSeri es 260 memory options Notes: 1. The customer can choose up to a to tal of (4) four memor y cards. One Memo ry Card is standard in the base. Four memo ry DIMMs can be select ed fo r each memory card installed .
224 CO G Figure 35. x3800 an d x260 DIMMs Table 40. Stan dard Memory Con figuration Model Std. DIMM Configuration 1 1Y, 1RY, 21Y, 2RY 2 x 1GB PC2-3200 CL3 ECC DDR-2 SDRAM RDIMM (73P2874) E1Y 4 x 1GB P.
Chapter 18. System x38 00 and xSeries 260 225 System x3800 and xSeries 260 hard disk drive (H DD) and optical storage options Notes: 1. The optional 6-drive SAS backplane upgrade kit is avai lable to increase the total hot-swap bays to 12 hot- swap b ays.
226 CO G Figure 36. x3800 an d x260 front vie w Bay Form Fa ctor Height Front Access Usage 1H S S L Y O P E N 2H S S L Y O P E N 3H S S L Y O P E N 4H S S L Y O P E N 5H S S L Y O P E N 6H S S L Y O P E N 7H S S L Y O P E N 8H S S L Y O P E N 9H S S L Y O P E N 10 HS SL Y OPEN 11 H S S L Y O P E N 12 HS SL Y OPEN A 133mm (5.
Chapter 18. System x38 00 and xSeries 260 227 System x3800 and xSer ies 260 I/O options Notes: 1. Internal tape d r ives are only support ed with this adapter in slot 1 o r 2.
228 CO G SLOT Type Bus Voltage (V) Frequency MHz Data Path Active PCI? (Hotswap) Slot Length Scan Sequence Device Number PCI Slot 1 P CI-X 2.0 2 Universal 266 64 Y Full 1 1 PCI Slot 2 P CI-X 2.0 4 Universal 266 64 Y Full 2 1 PCI Slot 3 P CI-X 2.0 6 Universal 266 64 Y Full 3 1 PCI Slot 4 P CI-X 2.
Chapter 18. System x38 00 and xSeries 260 229 System x3800 and xSeries 260 power an d accessories Notes: 1. System x3800 and xSeries 260 ship standard wi th two 775W hot-swap capable power supplies.
230 CO G Notes: 1. Converts KVM sig nals fo r CA T5 cabling for se rvers with PS/2 KVM po rts. 2. Provides hardware needed to conve rt the to wer unit into a 7U-high rack-mounted se rver.
Chapter 18. System x38 00 and xSeries 260 231 System x3800 and xSeri es 260 tape options Notes: 1. A minimum of 1 FH and a maximum of 2 HH ta pe d rives may be installed in this system. 2. External attachment need one of the 3 Exte rnal enclosures (4559HHX, 45591UX, or 45594UX).
232 CO G.
© Copyright IBM Cor p. 2003, 2006 233 Chapter 19. System x3850 and xSeries 366 The System x3850 and xSeries 366 is housed in a 3 U high, 19in rack-mountable drawe r and also provides three USB po rts.
234 CO G 8863-E9Y x3850 3.16/ 667 1M L2 Cache 0M L3 Cache 1 / 4 2GB/ 64GB Rack (3U) 2 / 2 P S H F M YD u a l 1GB SAS Hot- Swap 0GB/ 438GB Ultralight DVD-ROM Ultrabay Enhanced -7 / 6 8863- EA Y 9, 10,11 ,12 x3850 2.
Chapter 19. System x38 50 and xSeries 366 235 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
236 CO G 1 1. 8863-EA Y ships st andard with four memory card adapters. 12. Models 8863-3RY, 8863-4RY, 8863-3SY, and 8863- EA Y ship with a dual co re processor . Some dual processor models require the installation of a sp e ci fi c V R M for pr o per ser v er o per a ti o ns .
Chapter 19. System x38 50 and xSeries 366 237 System x3850 and xSeri es 366 memory options Notes: 1. x3850 and x366 support Chipkill, memory mirro ri ng, memory ProteXion technologies, hot-swap and hot-add memory. 2. Supported memo ry DIMMs can coexist in the same serve r.
238 CO G Figure 37. x3850 an d x366 DIMMs Figure 38. x3850 an d x366 perf o rmance sensitive configuratio ns Figure 39. x3850 and x3 66 cost sensitive configurations Figure 40.
Chapter 19. System x38 50 and xSeries 366 239 System x3850 and xSeries 366 hard disk drive (H DD) and optical storage options Notes: 1. Installation may require removing st andard devices. 2. All models ship standard with an Ultralight DVD-ROM Ultrabay Enhanced.
240 CO G Figure 41. x3850 an d x366 front vie w Figure 42. x3850 an d x366 operator information panel Bay Form Fa ctor Height Front Access Usage 12 . 5 i n S L Y e s H D D 22 . 5 i n S L Y e s H D D 32 . 5 i n S L Y e s H D D 42 . 5 i n S L Y e s H D D 52 .
Chapter 19. System x38 50 and xSeries 366 241 System x3850 and xSer ies 366 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support 1 Slots Supported Hot-Plug Capable Storage Controllers 24P0963 24P0960 1650 DS4000 Host Bus Adapter Half 64-bit/ 133MHz 1 .
242 CO G Notes: 1. Six 64-bit Active PCI-X 2.0 slots per chassis. 2. Option 17429xx may be subject to a rack installation/configuration fee. 3. IXA Adapter is suppor ted on the x3850 and x366 and must be installed in slot 2 only.
Chapter 19. System x38 50 and xSeries 366 243 Figure 43. x3850 an d x366 rear view Slot/Device Type Bus Voltage (V) Frequency MHz Data Path Active PCI Slot Length Dedicated Slot PCI-X 1 Universal 66MHz 64-bit N Special PCI Slot1 PCI-X 2.0 2 Universal 266MHz 64-bit Y Full PCI Slot 2 PCI-X 2.
244 CO G System x3850 and xSeries 366 power an d accessories Notes: 1. System x3850 and xSeries 366 ship with a single 1300 W hot-swap capable power supply and a rack power cable. When used with a 1 10V AC source, the powe r rating for this powe r supply falls to 650 W.
Chapter 19. System x38 50 and xSeries 366 245 Notes: 1. Refer to the Rack Console Options section for inf ormation regardi ng console connectivity using these options. 2. Installation within a rack req uires opti onal Monitor Compartment (Option 94G7444).
246 CO G System x3850 and xSeri es 366 tape options SBB Number Option Number Feature Code Tape Drive Bays Supported Storage Interface Form Factor Ext Tape Enclosures 24P7303 59P6736 5361 IBM 160/320 GB SDLT Internal SCSI Tape Drive - Ultra2 (16-bit) 133mm (5.
© Copyright IBM Cor p. 2003, 2006 247 Chapter 20. System x3950 and xSeries 460 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.
248 CO G following nomenclature : xxU. For example, the U.S. orderable part number fo r 8872-1RY is 8872-1RU. See the product specific Official IBM announcement lette r for othe r country-specific GA V model numbers. GA V to MTM mapping for L.A. and A.
Chapter 20. System x39 50 and xSeries 460 249 2. These processor options suppo rt up to 32-socket ( 64-cores) SMP applications in the System x3950 and xSeries 460.
250 CO G Notes: 1. Two memory car ds come standard. The first memo ry card has 2x1GB memory DIMMs installed. The second memory card is open. A total of four memo ry cards with four DIMM slots each, may be installed, allowing a total of 16 DIMMs (a total of 64GB) per chassis.
Chapter 20. System x39 50 and xSeries 460 251 Figure 44. x3950 an d x460 DIMMS System x3950 and xSeries 460 hard disk drive (H DD) and optical storage options SBB Number Option Number Feature Code Des.
252 CO G Notes: 1. Installation may require removing st andard devices. 2. All models ship standard with an Ultralight DVD-ROM Ultrabay Enhanced. SAS HDDs 26K5658 26K5654 5241 36GB 10K 2.
Chapter 20. System x39 50 and xSeries 460 253 Figure 45. x3950 an d x460 front vie w System x3950 and xSer ies 460 I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Supp.
254 CO G External Disk Systems and Options - 17226xx - DS4300 Midrange Disk (60U) - - - - - 17001RS - TotalStorage DS400 - Single Controller - --- - 17002RD - TotalStorage DS400 - Dual Controller - --.
Chapter 20. System x39 50 and xSeries 460 255 32P9296 22P7801 1501 NetXtreme 1000 SX Fiber Ethernet - --- System Management 39Y9567 39Y9566 1605 Remote Superviso r Adapter II Slimline Ref resh 1 H a l.
256 CO G Notes: 1. Option 39R8816 and option 39R881 5 are supported fo r e xternal attachment only and not for inte rnal HDDs. 2. The x3950 and x460 support six HDDs, which limits the ServeRAID 8i Controller to reach RAID configurations of 0, 1, 10, 5, 6, 50, 1E, and 5EE, but not RAID 60.
Chapter 20. System x39 50 and xSeries 460 257 Figure 46. x3950 an d x460 rear view Figure 47. x3950 an d x460 system board.
258 CO G System x3950 and xSeries 460 power an d accessories Notes: 1. For runtimes and UPS attributes, s ee Appendix C: UPS Runtime Estimate. 2. Height is 2U.
Chapter 20. System x39 50 and xSeries 460 259 SBB Number Option Number Feature Code Description Rack/Tower Conversion Kits 39Y8069 32P1636 3772 250mm KVM Conve rsion Option - 32P1652 - 1.
260 CO G - 90P0721 - IBM L170p 17" TFT Monitor (Hybrid) - 90P0726 - IBM C170 17" CRT Monito r - 49387NU - IBM C1 17 17" CRT Monitor - 494215U - IBM T1 15 15" TFT Monitor - 494317U .
Chapter 20. System x39 50 and xSeries 460 261 Notes: 1. Refer to the Rack Console Options section for inf ormation regardi ng console connectivity using these options.
262 CO G System x3950 and xSeri es 460 tape options SBB Number Option Number Feature Code Description Bays Supported Storage Interface Form Factor Ext Tape Encl Tape Drives 71P9199 59P6736 5360 160/320 GB SDLT Internal SCSI Tape Drive -U l t r a 2 (16-bit) 133mm (5.
Chapter 20. System x39 50 and xSeries 460 263 - 4559FH X - 2U Full High Stand Alone SCSI Tape Drive Enclos ure - U ltra160 (16-bit) Desktop or Rack She lf (4.
264 CO G.
© Copyright IBM Cor p. 2003, 2006 265 Chapter 21. Datacenter solution program The IBM Datacente r Solution Prog ram is a comprehens ive set of hardware, software and se rvice offer ings intended to delive r true enterprise computing solu tions based on the Microsoft® Windows® Serve r 2003 Datacente r Edition operating sy stems.
266 CO G Scalability/enablement memory card option x460 or x3950 Datacenter solutions containing 16 processors or g reater require on e Scala bility Enablement/Memory Adapter (P/N 40K2450) per chassis . Proof of the appropriate U.S. Governme nt Export License fo r sales in Tier 3 countr ies is required befo re this option can be obtained f rom IBM.
Chapter 21. Datacenter solu tion program 267 Datacenter solutions.
268 CO G x3950 and x460 sc alable diagrams Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your IBM Bu siness Partner or IBM Marketing Represe ntative for assistance with your speci fic configuration requirements.
Chapter 21. Datacenter solu tion program 269 Figure 50. 2 Node, 32- way Configuration MXE 460 MXE 460 MXE 460 MXE 460 MXE 460 MXE 460 MXE 460 xSeries 460 Fibre Storage MXE 460 MXE 460 MXE 460 MXE 460 .
270 CO G Single node Datacenter hi gh availability solutions The Datacenter High Availability (HA) Program Of fering delivers a full y configured, Datacente r-certif ied, IBM-installed ha rdware and operating sy stem solution fo r a ti ghtly-controlled high availab ility environment.
Chapter 21. Datacenter solu tion program 271 Scalability kit 5 13M7414 2.3m Scalability Cable 0 2 3 6 13M7416 2.9m Scalability Cable 0 0 3 6 Select appropriate processor 6, 7 13N0714 3.0GHz/667MHz-8MB L3 Cache Xeon Processor MP 0 4 12 28 13N0713 3.33GHz/667MHz-8MB L3 Cache Xeon Processor MP 0 4 12 28 25R8941 Dual Core 2.
272 CO G Notes: 1. All final customer configu rat ions and solutions require IBM Sol ution Assurance Approval. 2. The Datacenter OS comes preloaded on each High Availabili ty (HA) DC model. 3. Select one model to serve as the primary se rver. The OS will resid e on this se rver.
Chapter 21. Datacenter solu tion program 273 Multi-node Datacenter high availability solutions The Datacenter High Availability (HA) Program Of fering delive rs a fully configured, Datacente r-certified, IBM-installed ha rdware and operating sy stem solution fo r a tightly-controlled high avai lability environment.
274 CO G Select appropriate expansion encl osure 5 88741A Y x3950 E wit h 4-way 32-bit HA COA 2 4 6 12 14 28 88741BY x3950 E with 4-way 64-bit HA COA 2 4 6 12 14 28 88742A Y x3950 E wit h Dual Core 4-.
Chapter 21. Datacenter solu tion program 275 Notes: 1. All final customer configu rat ions and solutions require IBM Sol ution Assurance Approval. 2. Multi-node configurations are essentially s ingle-node configurations clustered together. Hardware/software that would be necessar y for cluste ring is not covered he re.
276 CO G 12. Memory can be installed using one of two methodol ogies: Perfo rmance ins tallation or cost-ef fective installation. Performance installation populates one pa ir of DIMMs per m emory c ard, until four cards are installed, befo re adding a second pa ir of DIMMs to a card.
Chapter 21. Datacenter solu tion program 277 39Y6079 NetXtreme 1000 TxG Ethe rnet Adapter Can be installed in models 88727 A Y, 88727BY, 88728A Y, 88728BY, 88743A Y and 88743BY 39Y6093 NetXtreme 1000 .
278 CO G Notes: 1. All final customer configu rat ions and solutions require IBM Solut ion Assurance Approval. 2. Software subscriptions fo r the Datacenter High Ava ilability offe ring provide upgrades and updates to the Datacenter Ope rating System for a period of twelve months and can be renewed annually.
Chapter 21. Datacenter solu tion program 279 Datacenter scalable solutions The Datacenter Scalable Program Of fering delive rs a Datacenter Solution that meets Microsoft Datacente r certification requirements in a non-cluster environmen t giving the custome r greate r freedom in choosing I/O and othe r system components.
280 CO G Select appropriate expansion enclosure 4 88741DY x3950 E with 4-way 32-bit Scalable COA 0 1 3 7 88741EY x3950 E with 4-way 64-bit Scalable COA 0 1 3 7 88742DY x3950 E with Dual Core 4-way 32-.
Chapter 21. Datacenter solu tion program 281 Notes: 1. All final customer configu rat ions and solutions require IBM Sol ution Assurance Approval. 2. The Datacenter OS is not preloaded but is pr ovided "in-box" with ea ch Scalable DC model. 3.
282 CO G upgraded, the new system model type must be regist ered wi th IBM. Directions f or regi stering the new system model type are included in the option. 14. Minimum two identical H DDs required on primary server (x3950) fo r OS . HDDs are optional for x3950 E.
Chapter 21. Datacenter solu tion program 283 4818HAX Software Update Subscription fo r Microsoft Windows Serve r 2003 Datacenter Edition, 64-bit, 4 processor, Scalab le, x460 Compatible with x460 and MXE-460.
284 CO G Notes: 1. All final customer configu rat ions and solutions require IBM Sol ution Assurance Approval. 2. A maximum of two Se rveRAID 8i controllers is al lowed per Datacenter node (each instance of the operatin g system). One of the two Serve R AID 8i contro lle r s must be installed in the x460 or the x3950.
Chapter 21. Datacenter solu tion program 285 Manufacturing configuration services Required se rvice of feri ngs are manufacturing install fees associated with installi ng and configuring xSe ries solutions.
286 CO G.
© Copyright IBM Cor p. 2003, 2006 287 Chapter 22. eServer 326m Table 53. e Server 326m At-A-Glance Part Number 1 CPU/FSB Speed (GHz/MHz) - Cache 2 Number of Proc essors (Std/Max) Memory (Std/Max) 3 F.
288 CO G 7969-67Y 2.2/1000 1MB L2 Opteron Processo r Model 275 Dual Core 2 / 2 4GB/ 16GB Rack (1U) 1 / 1 - Y 1GB U320 Hot- Swap 72.8GB/ 600GB - 7 3 / 2 2 / 2 7969-68Y 2.
Chapter 22. eServer 326m 289 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
290 CO G eServer 326m proc essor options Notes: 1. Microprocesso r SMP upgrades must be of the same type and clock speed. Mixing mic roprocessors of diffe rent speeds or cache size is not suppo rted. eServer 326m me mory optio ns Notes: 1. The eServe r 326m supports mixed memory size s in pairs and featur es Chipkill memory.
Chapter 22. eServer 326m 291 Figure 51. eServer 326m DIM Ms eServer 326m internal SCSI cabling Hot-Swap SCSI models eServe r 3 26m hot-swap models contain a DASD back plane supporting two hot-sw ap, SCA-2-compliant drive bays.
292 CO G eServer 326m hard disk drive (HDD) and optical storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty SA T A HDDs 13M7715 25R6902 5252 80GB 7200 RPM S.
Chapter 22. eServer 326m 293 eServer 326m I/O options SBB Number Option Number Feature Code Description Adapter Length PCI Support Slots Supported Hot Plug Capable Storage Controllers 02R0995 39R8815 .
294 CO G Notes: 1. If a Remote Supervisor Adapte r is selected, th en PCI-X Riser, SBB 32R2287, is required. The PCI-X Adapter must be plugged into slot 1 on the PCI-X Riser Card. 2. If two PCI adapters are selected, on e m u s t b e a P C I - E h a l f l e n g t h a d a p t e r a n d i t m u s t b e p l u g g e d i n t o P C I Slot 2.
Chapter 22. eServer 326m 295 eServer 326m powe r and accessories SBB Number Option Number Feature Code Description Power -- - - Power Distribution Units 39Y7980 39Y8905 5900 DPI NEMA Rack PDU - 39Y899.
296 CO G eServer 326m tape options Notes: 1. Supported externally only. SBB Number Option Number Feature Code Description Bays Supported Storage Interface Form Factor Ext Tape Encl Tape Drives 42C3932.
© Copyright IBM Cor p. 2003, 2006 297 Chapter 23. BladeCenter ® T 8720 Notes: 1. The Management Module inco rporates a ch ass is-level management processo r and dual Keyboard/Video/Mouse (KVM) switches . No exter nal KVM switc hing is required. Installation of additional Management Module will require additional powe r supplies.
298 CO G BladeCenter T 8720 optical storage options Figure 52. BladeCente r T 8720 front view BladeCenter T 8720 cabling options SBB Number Option Number Feature Code Description Type Height Bays Supp.
Chapter 23. Blade Center ® T 8720 299 Notes: 1. This cable is 1.5m in length and provides four connections between the opti cal pass-t hru-module (OPM) and an external Ethe rnet or fibre environment. 2. Provides five copper connections between the coppe r pass-thru module (CPM) and an external gigabit Ethernet environment.
300 CO G Figure 54. IBM BladeCenter Optical Pass-th ru Module SC Cable (1.5 M) This cable provides connection between the Optical Pa ss-th ru Module and an external environment. This 1.5m cable presents four SC connections. Figure 55. Infin iBand 12x to (3) 4x Cable 3 meter for IBM BladeCente r Figure 56.
Chapter 23. Blade Center ® T 8720 301 Figure 57. IBM CX4 1.5 or 3.0 meter Cable fo r IBM Blade Center (C onnector colo r is Gray) BladeCenter T 8720 I/O options SBB Number Option Number Feature Code .
302 CO G Notes: 1. Mixing Ethernet (including Coppe r Pass-thru Module (CPM)) and Fibre/SAN swi tches in I/O module bays 3 and 4 is not supported. H owever, mixing Optical Pass-t hru modules (OPM) and Ethernet o r Fibre/SAN switches in bays 3 and 4 is supported.
Chapter 23. Blade Center ® T 8720 303 Figure 58. BladeCente r T 8720 modules BladeCenter T 8720 power and accessories Table 57. BladeCe nter Standard Power Configur ation Model Power Modules Power Co.
304 CO G.
© Copyright IBM Cor p. 2003, 2006 305 Chapter 24. BladeCenter ® T 8730 Notes: 1. The Management Module inco rporates a ch ass is-level management processo r and dual Keyboard/Video/Mouse (KVM) switches . No exter nal KVM switc hing is required. Installation of additional Management Module will require additional powe r supplies.
306 CO G BladeCenter T 8730 optical storage options Figure 59. BladeCente r T 8730 front view BladeCenter T 8730 cabling options SBB Number Option Number Feature Code Description Type Height Bays Supp.
Chapter 24. Blade Center ® T 8730 307 Notes: 1. This cable is 1.5m in length and provides four connections between the opti cal pass-t hru-module (OPM) and an external Ethe rnet or fibre environment. 2. Provides five copper connections between the coppe r pass-thru module (CPM) and an external gigabit Ethernet environment.
308 CO G Figure 61. IBM BladeCenter Optical Pass-th ru Module SC Cable (1.5 M) This cable provides connection between the Optical Pa ss-th ru Module and an external environment. This 1.5m cable presents four SC connections. Figure 62. Infin iBand 12x to (3) 4x Cable 3 meter for IBM BladeCente r Figure 63.
Chapter 24. Blade Center ® T 8730 309 Figure 64. IBM CX4 1.5 or 3.0 meter Cable fo r IBM Blade Center (C onnector colo r is Gray) BladeCenter T 8730 I/O options SBB Number Option Number Feature Code .
310 CO G Notes: 1. When installed in switch module bay 3, port 1 is enabled on blade-installed Fi bre Channel expansion cards. When installed in switch ba y 4, port 2 is en abled on blade-installed Fibre Channel expansion cards. 2. One required per system.
Chapter 24. Blade Center ® T 8730 311 Figure 65. BladeCente r Telco 8730 modules BladeCenter T 8730 power and accessories SBB Number Option Number Feature Code Description Power 32R0826 32R0834 1961 .
312 CO G.
© Copyright IBM Cor p. 2003, 2006 313 Chapter 25. BladeCenter ® chassis 8677 Notes: 1. Model number is a wo rldwide general available variant (GA V) model numbe r which is not or derable as listed and needs to be modified by country. The U.S. GA V model numbe rs use the following nomenclature: xxU.
314 CO G Figure 66. 8677 f ront view BladeCenter chassis 8677 optical storage options BladeCenter chassis 8677 cabling options Table 61. BladeCent er Chassis, blade server support Blade Server 8677 HS.
Chapter 25. BladeC enter ® chassis 8677 315 Notes: 1. This cable is 1.5m in length and provides four connections between the opti cal pass-t hru-module (OPM) and an external Ethe rnet or fibre environment. 2. Provides five copper connections between the coppe r pass-thru module (CPM) and an external gigabit Ethernet environment.
316 CO G Figure 68. IBM BladeCenter Optical Pass-th ru Module SC Cable (1.5 M) This cable provides connection between the Optical Pa ss-th ru Module and an external environment. This 1.5m cable presents four SC connections. Figure 69. Infin iBand 12x to (3) 4x Cable 3 meter for IBM BladeCente r Figure 70.
Chapter 25. BladeC enter ® chassis 8677 317 Figure 71. IBM CX4 1.5 or 3.0 meter Cable fo r IBM Blade Center (C onnector colo r is Gray) BladeCenter chassis 8677 I/O options SBB Numbe r Option Number .
318 CO G Notes: 1. Mixing Ethernet (including Coppe r Pass-thru Module (CPM)) and Fibre/SAN swi tches in I/O module bays 3 and 4 is not supported. H owever, mixing Optical Pass-t hru modules (OPM) and Ethernet o r Fibre/SAN switches in bays 3 and 4 is supported.
Chapter 25. BladeC enter ® chassis 8677 319 Figure 72. 8677 r ear view Figure 73. 8677 switch module bays.
320 CO G Figure 74. 8677 ma nagement module bays BladeCenter chassis 8677 power and accessories Table 62. BladeCe nter Standard Power Configurat ion Model Power Modules Power Cord 8677-3XY, 8677-3EY, 8677-3RY 2 x 2000w 2 x 2.
© Copyright IBM Cor p. 2003, 2006 321 Chapter 26. BladeCenter ® H 8852 Notes: 1. Model number is a wo rldwide general available variant (GA V) model numbe r which is not or derable as listed and needs to be modified by country. The U.S. GA V model numbe rs use the following nomenclature: xxU.
322 CO G Figure 75. BladeCente r H 8852 front view BladeCenter H 8852 optical storage options Notes: 1. Only the read function is suppo rted on the Combo II drive.
Chapter 26. BladeC enter ® H 8852 323 BladeCenter H 8852 cabling options Notes: 1. This cable is 1.5m in length and provides four connections between the opti cal pass-t hru-module (OPM) and an external Ethe rnet or fibre environment.
324 CO G Figure 76. IBM BladeCente r Copper Pass-th ru Module Cable This IBM BladeCenter option provides connection be tween the copper pass-thru module and an external environment. This cable allows up to five copper conne ctions to blade servers. One of these cables included with each copper pass-thr u module.
Chapter 26. BladeC enter ® H 8852 325 Figure 79. Infi niBand 4x Cable 3 meter for IBM BladeCenter Figure 80. IBM CX4 1.5 or 3.0 meter Cable fo r IBM Blade Center (Con nector colo r is Gray) BladeCent.
326 CO G 32R1863 32R1860 1495 Nortel Netwo r ks L2/L3 Copper Gigabit Ethe rnet Switch Module for IBM BladeCenter - - 3, 4 Y 2 32R1864 32R1861 1496 Nortel Netwo r ks L2/L3 Fiber Gigabit Ethe rnet Switc.
Chapter 26. BladeC enter ® H 8852 327 Notes: 1. Mixing Ethernet (including Coppe r Pass-thru Module (CPM)) and Fibre/SAN swit ches in I/O module bays 3 and 4 is not supported. Howeve r, mixing Optical Pass-thru modules (OPM) and Ethernet o r Fibre/SAN switches in bays 3 an d 4 is supported.
328 CO G Figure 81. BladeCente r H 8852 rear view.
Chapter 26. BladeC enter ® H 8852 329 BladeCenter H 8852 power and accessories Notes: 1. Two power co rds are required. Table 65. BladeCe nter H Standard Power Configura tion Model Power Modules 8852.
330 CO G.
© Copyright IBM Cor p. 2003, 2006 331 Chapter 27. BladeCenter ® HS20 - 7981 Notes: 1. This model is a 32-bit platform only. 64-bit ope rating systems are not suppo rted. 2. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country.
332 CO G HS20 - 7981 processor options Notes: 1. If two processors are installed they must have the same co re freque ncy, Front Side B us fr equency (667MHz) and the same L2 cache size. 2. The CPU with the lowest stepping level must be installed as CPU 1.
Chapter 27. BladeCe n ter ® HS20 - 7981 333 HS20 - 7981 memory options Notes: 1. The memory subsys tem is a 2-way interleaved subs ystem; memory must be populated in pairs of 2 identical DIMMs. The two members of the pair must be matched, but the sets do not have to be matched.
334 CO G HS20 - 7981 hard disk driv e (HDD) storage options Notes: 1. Installation of a second SFF SAS HDD will physically prevent installation of certain expan sion cards. See I/O section for mo re information. 2. BladeCenter HS20-7981 will support the installation of two SFF SAS dr ives and one SFF daughter card.
Chapter 27. BladeCe n ter ® HS20 - 7981 335 HS20 - 7981 I/O options Notes: 1. Quantity one expa nsion card is suppo rted inside th e blade itself. Installation of a StFF (standard fo rm factor) card will physically prevent installation of a second HDD.
336 CO G.
© Copyright IBM Cor p. 2003, 2006 337 Chapter 28. BladeCenter ® HS20 - 8843 The HS20 - 8843 requires that the BladeCente r chassis have 2000w power supplies installed. The HS20 - 8843 can be insta lled into and removed from the BladeCenter chassis while the chassis is powe red up.
338 CO G Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU. For example, the U.
Chapter 28. BladeCe n ter ® HS20 - 8843 339 HS20 - 8843 processor options Notes: 1. One additional processo r may be installed, prov iding a maximum of two. All processors must be identical in type, speed and cache size. HS20 - 8843 memory options SBB Number Option Number Feature Code Processor Options SMP Support 1 25K8383 13N0699 0271 2.
340 CO G Notes: 1. This system is prel oaded with Mi crosoft® Windows® Storage Se rver 20 03, Non-Cluster Ve rsion (1-4 Proc Version) (Standard Block Mode). The maximum usab le memo ry with Micros oft® Windows® Storage Serve r 2 003, Non-Cluster Version (1-4 Proc Version) Figure 86.
Chapter 28. BladeCe n ter ® HS20 - 8843 341 Notes: 1. Installation of a second HDD will physica lly prev ent installation o f certai n expansion cards and vice- versa. See I/O section for mo re information. 2. Requires BladeCenter Sto rage Expansion unit.
342 CO G HS20 - 8843 I/O options SBB Number Option Number Feature Code Description Form Factor Blade Server Expansion Cards 1, 2 26K4837 73P6000 1546 Myricom® Myrinet® Expansion Card for BladeCente .
Chapter 28. BladeCe n ter ® HS20 - 8843 343 Notes: 1. Quantity one expansi on card is suppo rted inside the blade itself . The optional expansion unit will allow for two mo re cards. Installation of a StFF (standard fo rm facto r ) card will physically prevent installation of a second HDD.
344 CO G.
© Copyright IBM Cor p. 2003, 2006 345 Chapter 29. BladeCenter ® HS21 - 8853 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.
346 CO G 6. An integrated, single-channel, SAS controlle r support s integ rated RAID-0 and 1. RAID-1 E and 5 requires the optional BladeCente r Storage and I/O Expansion Blade. 7. Maximum internal storage capacity is base d on installation of two 73GB SAS HDDs.
Chapter 29. BladeCe n ter ® HS21 - 8853 347 HS21 - 8853 memory options HS21 - 8853 hard disk driv e (HDD) storage options Notes: 1. RAID-1E and 5 requires the optional BladeCente r Storage and I/O Ex.
348 CO G HS21 - 8853 I/O options Notes: 1. Comes standard with option 39R7563. SBB Number Option Number Feature Code Description Form Factor Storage Controllers 25R8077 25R8064 1670 IBM ServeRAID-8k S.
© Copyright IBM Cor p. 2003, 2006 349 Chapter 30. BladeCenter ® HS40 Notes: 1. Blade serve r models xTx are designed to support the telecommunicati ons industry. 2. Not available from IBM after this date. Bu siness Partne r Inventory may be available.
350 CO G HS40 processor options Notes: 1. Up to three additional processo rs may be installed, providing a maximum of four. Al l processo rs must be identical in type, speed and cache size. HS40 memory options Notes: 1. BladeCente r HS40 supports up to 16GB of Chipkill memo ry via 8 DIMM slots.
Chapter 30. BladeCenter ® HS40 351 HS40 I/O options Notes: 1. Two identical expansion cards are allowed. Each installed expansion card will physically prevent installation of one IDE HDD and vice-ve rsa. 2. Requires appropriate I/O modules to be installed in the BladeCenter chass is.
352 CO G.
© Copyright IBM Cor p. 2003, 2006 353 Chapter 31. BladeCenter ® JS20 Notes: 1. 2-way blade serve r installs in a BladeCenter chassis. KVM support is not provid ed; use se rial over LAN communication to perfo rm local, network operating system or software installation as an alternative to KVM.
354 CO G JS20 memory options Notes: 1. DIMMs are installed in matched pairs using th e following population o rder: DIMM3 & DIMM4, DIMM1 & DIMM2. JS20 hard disk drive (HDD) storage options Notes: 1. Up to two IDE HDDs may be installed in each JS 20.
Chapter 31. B ladeCenter ® JS20 355 JS20 I/O options Notes: 1. One expa nsion card is allowed per blade server and in st al l s o v er I D E H D D b a y 2 , pr e ve nt i ng i ns t al la t io n of second IDE HDD. 2. Requires appropriate I/O modules to be installed in the BladeCenter chassis.
356 CO G.
© Copyright IBM Cor p. 2003, 2006 357 Chapter 32. BladeCenter ® JS21 JS21 memory options Table 75. BladeCenter JS21 At-A-Glance Part Number CPU/FSB Speed (GHz/MHz) - Cache Processor Quantity (Std/Ma.
358 CO G Notes: 1. The installed DIMMs on a JS21 Blade must all be PC2-3200 (400MHz DDR2) or all PC2-4300 (533MHz DDR2), a mix is not suppo rted. Memory must be ins talled in pairs.
Chapter 32. B ladeCenter ® JS21 359 JS21 hard disk drive (HDD) storage options Notes: 1. Up to two SAS HDDs may be installed in each JS21. Figure 89. JS21 SAS HDDs SBB Number Option Number Feature Code Description Heigh t Bays Supported Maximum Quantity 1 SAS HDDs 26K5780 26K5776 5297 36GB 10K SFF SAS NHS HDD 2.
360 CO G JS21 I/O options Notes: 1. If this expansion card is selected, a second hard drive cannot be selected. SBB Number Option Number Feature Code Description Adapter Length PCI Suppor t Slots Supported Hot Plug Capable Max Supported Networking 26K4843 39R8624 1548 SFF Gb Ethe rnet Exp.
© Copyright IBM Cor p. 2003, 2006 361 Chapter 33. BladeCenter ® LS20 Notes: 1. Model numbers pr ovided are worldwide ge nerally available variant (GA V) model numbers which are not orde rable as listed and need to be modified by country. The U.S. GA V model numbers use the following nomenclature: xxU.
362 CO G GA V to MTM mapping for A P Geographies follow the sa me pattern. Substitute the last character with a country-specific designator. 2. The LS20 blade server installs in a BladeCenter chas sis and ships without a ke yboard and mouse.
Chapter 33. BladeCe n ter ® LS20 363 LS20 memory options SBB Number Option Number Feature Code Description 73P5136 - 0520 512MB PC2700 CL3 ECC DDR SDRAM V LP RDIMM 39M5844 - 0516 512MB PC-3200 CL3 EC.
364 CO G Figure 91. LS20 system bo ard LS20 hard disk drive (HDD) storage options SBB Number Option Number Feature Code Description Height Bays Supported Max Qty Fixed (Neonate-swap) Ultra320 HDDs 40K1069 40K1037 5256 36GB Non Hot-Swap 2.5" 10K RPM Ultra320 SCSI HDD SFF 1, 2 2 40K1070 40K1038 5255 73GB Non Hot-Swap 2.
Chapter 33. BladeCe n ter ® LS20 365 LS20 I/O options Notes: 1. Quantity one expa nsion card is suppo rted inside th e blade itself. Installation of a StFF (standard fo rm factor) ex pansion card will phys ically prevent installation of a se cond HDD.
366 CO G.
© Copyright IBM Cor p. 2003, 2006 367 Chapter 34. Blade server storage and I/O expansion Notes: 1. Embedded suppo rt is provided f or RA ID levels 0 and 1. 2. Option is supported on BladeCenter 8853 only. Supports up to three 2.5" SAS HDDs. 3. Options apply to IBM BladeCenter Sto rage and I/O Expansion Unit only.
368 CO G Figure 93. BladeCente r Storage and Expansion Unit 3, View 2 Figure 94. BladeCente r Storage and Expansion Unit 3, View 3.
Chapter 34. Blade server storage and I/O expansion 369 Notes: 1. PCI adapter options for the BladeCenter PCI I/O Expansion Unit. PCI adapters in the unit provide external conne ctions only.
370 CO G.
© Copyright IBM Cor p. 2003, 2006 371 Chapter 35. VMware offerings Note: VMware support is required when purchasing VMware software. Virtual machine software fo r consolidating and partit ioning systems in high-perfo rmance environments.
372 CO G Notes: 1. Orderable only when configu red with an xSeri es serve r, not separately. 2. When orde ring VMware ESX Server 2 products, the latest 2.x ve rsion will be shipped. 3. Add-on module to VMware ESX Se rver 2.x that allows a single virtual machi ne to span multiple physical processor s .
Chapter 35. VMware offer ings 373 Virtual Infrastructure management software fo r environments using VMware ESX Serve r. Table 82. VMware VirtualCenter and Add-Ons for ESX and GSX Option Number Descri.
374 CO G Notes: 1. A VirtualCenter add-on that enables live serve rs to be moved from one virtual machine host to another. 2. A VirtualCenter bundle which includes licenses for VMware ESX Se rver, VMware Virtual SMP, the VMware VirtualCenter Management Ag ent, and VMware Vmotion.
Chapter 35. VMware offer ings 375 Offe rs resource optimization, high availability and data protection that deliver capabilities not possible with physical machines. VMware Infrastructu re 3 expand s the processing and memory capaci ty of virtual machines so that intensive workloads can benefit f rom virtualization.
376 CO G 4817T05 VMware DRS 2 fo r 2 sockets - 3 year Full Subscription 4817U05 VMware DRS 2 for 2 sockets - 5 year Full Subscription 4817L05 VMware DRS 2 for 2 socke ts - 1 year Limited Subscription .
Chapter 35. VMware offer ings 377 4817V18 VMware Virtual Des ktop Infrastructu re (VDI) Standard Pilot Bundle including PSO VDI Pilot, 25 VMs, VirtualCenter Management Se rver up to 4 Sockets 4817S18 .
378 CO G These BladeCenter license packs and media kits enable you to conveniently purchase VMware software and product media for a full BladeCenter chassis. Notes: 1. Contains licenses for Virtual Infrastructu re Nodes for 14 two-way blades. 2. Contains licenses for Vi rtual Inf rastructure Nodes for seven fou r-way blades.
Chapter 35. VMware offer ings 379 Virtual machine software ideal fo r x86-based serve r co nsolidation, disaster reco ve ry, 2 and streamlining software development processes. Media kits contai n entitlement to a physical pr oduct CD and printed manual as an alterna tive to convenient downloads.
380 CO G The following servers are compatible with VMware ESX Server 2.x, ESX 2.x upgrades, Virtual SMP and Virtual SMP Up grades. • IBM provides support for Windows, Linux and leading appl ications in a VMware environment. • Diffe rences in system configurations are in visible to op erating systems and applications.
© Copyright IBM Cor p. 2003, 2006 381 Chapter 36. xSeries network operating system offerings IBM Systems Group of fers a range o f Network Ope rating Systems (NOS) on xSeries se rvers and IntelliStation workstati ons.
382 CO G 32R1025 MS Storage Se rver 2003 - Non Cluste r - (1-4 proc) X 2 32R1026 MS Storage Se rver 2003 - Non Cluste r - (1-4 proc) X 2 59P2923 Windows XP Professional X X X X 39Y5076 Windows XP Prof.
Chapter 36. xSeries netw ork operating system offer ings 383 32R2744 Red Hat Enterprise Linux ES 3 AMD64/EM64T with 1 yr Red Hat Network, preloaded XX XX 32R2746 Red Hat Enterprise Linux ES 3 AMD64/EM.
384 CO G 25K7966 Red Hat Enterprise Linux AS 3 Standard x86 with 1 yr Red Hat support, preloaded X X X X 25K7967 Red Hat Enterprise Linux AS 3 Standard x86 with 1 yr Red Hat Network, preloaded X X X X.
Chapter 36. xSeries netw ork operating system offer ings 385 32P9577 Red Hat Enterprise Linux ES 3 Standard x86 with 3 yr Red Hat Network, preloaded XX X X X X X 25K7974 Red Hat Enterprise Linux WS 3 .
386 CO G 39Y5308 Red Hat Enterprise Linux AS 4 with 1 yr Premium Red Hat Support (CD) 3 X X XX XX X XXXXX X X X 39Y5310 Red Hat Enterprise Linux ES 4 with 1 yr Standard Red Hat Support (CD) 3 X X XX X.
Chapter 36. xSeries netw ork operating system offer ings 387 39R7022 Red Hat Enterprise Linux ES 4 with 1 yr Subscription (32- bit, preinstalled) XX X 39R7028 Red Hat Enterprise Linux ES 4 with 3 yr S.
388 CO G 31R1437 SUSE Linux Enterprise Serve r 9 1-16 CPUs fo r 3 years (CD) 3 X X XX XX X XXXXX X X X 40K1392 SUSE Linux Enterprise Serve r 9 for BladeCenter Chassis with 1 yr Subscription XXXX 40K13.
Chapter 36. xSeries netw ork operating system offer ings 389 32R2642 SUSE Linux Enterprise Serve r 9 1 yr Subscription per additional 8 Cluster Nodes XX 32R2643 SUSE Linux Enterprise Serve r 9 3 yr Su.
390 CO G 40K1510 Red Hat Enterprise Linux 4 1 yr standard subscription, 8 Cluster Nodes XX 40K151 1 Red Hat Enterprise Linux 4 1 yr standard subscription, 8 Cluster Nodes XX 25R3625 Red Hat Enterprise.
Chapter 36. xSeries netw ork operating system offer ings 391 Notes: 1. Orderable only when configured with an xSe ries serv e r or IntelliStation work station, not separately. Available in select countries. For more info rmation, check with your loc al IBM representative.
392 CO G.
© Copyright IBM Cor p. 2003, 2006 393 Chapter 37. IBM and third party software applications Check with your IBM representative to verify applicat ion s oftware availabilit y for your system. IBM makes no representations or warranties regarding third-party products o r servic es.
394 CO G Table 89. Applicatio n Workload Manag er Application Workload Man ager for IBM Director Features Include: • Tools to manage contending server wo rkloads. • Policy-based allo cation, management, and control of system resources. • Distribution of resources at the user and application level.
Chapter 37. IBM and third party softwa re applications 395 Table 91. Remo te Deployme nt Manager Remote Deployment Manager Features In clude: • Remote replication of sy stem installati ons • Remote unattended system deployment • Updating system and option firmware • Rapid image backup and restore technology Remote Deployment Manager v4.
396 CO G Table 93. Altiris Depl oyment Solution Altiris Deployment Solution for Servers Features Include: • Comprehensive serve r deployment for both Windows an d Linux environments , including configuration of BIOS, RAID, and othe r components. • Full system imagin g and scripted ope rating system installations of Window s and Linux.
Chapter 37. IBM and third party softwa re applications 397 Table 94. SteelEye LifeKeeper High Availability Clus tering Software SteelEye LifeKeeper HA Clustering Software Features In clude: • Enterprise-grade integrated clusteri ng and data replicatio n offe ring.
398 CO G 39Y5177 LifeKeeper Extender fo r Windows 24R9484 MS IIS 5.0 Web Server Module 24R9485 SQL Server Module 24R9486 DB2 WE, EE, EEE, ESE Module 24R9487 Oracle 8i & 9i Module 24R9488 SteelEye .
Chapter 37. IBM and third party softwa re applications 399 Table 96. VERIT AS Cluster Server and Storage Fo undation Solutions ARMTech 2.x Active Resource Management for Windows VERIT AS Cluster Serve r and Storage Foundation products ar e offe red on IBM eServer xSe ries and BladeCenter serve rs running Microsoft Windows and Linux.
400 CO G 4812M9X Cluster Serve r for NetApp SnapMi rro r, Windows, Advanced/Enterprise Edition, v4.3, License, with no support 4812C9X Cluster Serve r for NetA pp SnapMirror, Windows, Advanced/Ente rpris e Edition, v4.3, Li cense, with basic support 4812F9X Cluster Se rver for NetApp Snap Mirro r, Windows, Advanced/Enterprise Edition, v4.
Chapter 37. IBM and third party softwa re applications 401 4812FJX Dynamic Multipathing (DMP) Option, Windows, Ad vanced/Enterprise Edition, v4.3, License, with extended support 4812MKX Dynamic Multipathing (DMP) Option, Windows, Datacente r, v4.3, License, with no suppo rt 4812CKX Dynamic Multipathing (DMP) Option, Windows, Datacenter, v4.
402 CO G 4812FWX HA Enterprise O ption, Windows, Advanced/Ente r prise Edition, v4.3, Licens e, with extended support 4812MXX HA Enterprise Option, Windows, Data cent er Edition, v4.3, Lice nse, with no support 4812CXX HA Enterprise Option, Windo ws, Datacent er Edition, v4.
Chapter 37. IBM and third party softwa re applications 403 4812N7X Hardware Replication Agent for IBM PPRC, Wind ows, Datace nter, v4.3, License, with no suppo rt 4812D7X Hardware Replication Agent fo r IBM PPRC, Window s, Datacenter, v4.3, License, with basic suppo rt 4812G7X Hardware Replication Agent fo r IBM PPRC, Windows, Datacenter, v4.
404 CO G 4812GPX Storage Foundation HA, Windows, Serve r/Standard/Web Edition, v4 .3, License, with extended support 4812NQX Storage Foundation, Windows, Advanced/Ente rprise Edition, v4.3, License, with no support 4812DQX Storage Foundation, Windows, Advanced/Ente rprise Edition, v4 .
Chapter 37. IBM and third party softwa re applications 405 4812E2X Cluster Serve r , Global Cluste r Option, Linux, Pe r CPU, v4.1, License, with extended support 4812L3X Cluster Serve r , Oracle Agent, Linux, Pe r CPU, v4.1, License, with no suppo rt 4812B3X Cluster Serve r , Oracle Agent, Linux, Pe r CPU, v4.
406 CO G 4812BFX Sto rage Foundation Cluster File System Ente rprise HA, Linux, Per CP U, v4.1, License, with basic support 4812EFX Sto rage Foundation Cluster File System Ente rprise HA, Linux, Per CPU, v4.1, License, with extended support 4812LGX Cluster Server, Linux, Red Hat EL 3.
Chapter 37. IBM and third party softwa re applications 407 4812ESX Cluster Serve r, Linux, Ap ache HTTP, Per CPU, v4.0, Li cense, with extended support 4812LTX Storage Foundation Ente rprise for Oracle RAC, Linux, Red Hat EL 3.0 (IA- 32), Pe r CPU, v4.
408 CO G 4812F2X Storage Foundation Cluster File Syste m Enterprise, Linux, Red Hat EL 3.0 (IA-32), Per CPU, v4.0, License, with extended support 4812M3X Storage Foundation Cluste r File System Ente rprise HA, Linux, Red Hat EL 3. 0 (IA-32), Per CPU, v4.
© Copyright IBM Cor p. 2003, 2006 409 Chapter 38. EXP400 storage expansion unit Notes: 1. Includes a single 2m Ultra2 SCSI cable and dual hot-sw ap 500w redunda nt power supplies, two line cords and two rack powe r cables. 2. DC power mode l requiring -48v powe r source.
410 CO G EXP400 hard disk drive (HDD) storage options Notes: 1. EXP400 Storage Expansion Unit ships with 14 slim-l ine hot-swap bays which can be configured as a single bus, two independent buses or a twintailed single bus. 2. Twintailing reduces the maxi mum number of HDDs on a single bus to 13.
© Copyright IBM Cor p. 2003, 2006 411 Chapter 39. EXP420 storage expansion unit Notes: 1. Includes two 4Gbps SW SFPs, dual hot-swap 600w redundant po wer supplies,and two rack power cables.
412 CO G EXP420 hard disk drive (HDD) storage options EXP420 other options Option Number Description Height Bays Supported Maximum Quantity SA T A HDDs 42D0389 DS4200 Enhanced 500GB SA T A Value Disk Drive Module SL 1 .
© Copyright IBM Cor p. 2003, 2006 413 Chapter 40. TotalStorage DS300 disk system Notes: 1. Not available from IBM after this date. Bu siness Partne r Inventory may be available. 2. Ships standard with a single controll er. Not upgradeable to dual-controllers.
414 CO G Notes: 1. Maximum number of host ports an d redundant host connections requires upgr ad ing to dual controllers. TotalStorage DS300 hard disk drive (HDD) storage Table 102.
Chapter 40. TotalSto rage DS300 disk system 415 Notes: 1. DS300 model 1RL in its base configuration suppo rts seven HDDs. Installation of eight or mo re HDDs requires the optional Power Supply and HDD Kit.
416 CO G TotalStorage DS300 other options Notes: 1. Hardware iSCSI initi ator which installs into a supported se rver and connects via ethernet cabling to a DS300 via required ethernet switch. 2. Provides RJ45 port fo r connectivity to copper cabling.
© Copyright IBM Cor p. 2003, 2006 417 Chapter 41. TotalStorage DS400 disk system Notes: 1. Not available from IBM after this date. Bu siness Partne r Inventory may be available. 2. Ships standard with a single controller . Can be upg raded to dual-controllers.
418 CO G 6. Also includes four 146GB HDDs, four short-wave SFP modules, four DS4000 Host Bus Adapters and four 5m LC-LC Fibre Channel cables. 7. Also includes two sho rt-wave SFP modules, two DS4000 Host Bus Adapters and two 5m LC-LC Fibre Channel cables.
Chapter 41. TotalSto rage DS400 disk system 419 TotalStorage DS400 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc. Refer to the "Othe r Options" table for possible required related options.
420 CO G TotalStorage DS400 other options Notes: 1. Installs into a supported se rv er and connects via fi bre channel cabling directly to the DS400 or to a supported fibre channel s witch. 2. Available for DS400 model 1RS and 1ES. Provides a second controller for redundancy with dual 2Gb fibre channel ports.
© Copyright IBM Cor p. 2003, 2006 421 Chapter 42. TotalStorag e DS4100 disk system Table 105. T otalStorage DS 4100 Di sk System At-A- Glance Name Part Number Withdrawal Date 1 Storage Type HDD Bays .
422 CO G Notes: 1. Not available from IBM after this date. Bu siness Partne r Inventory may be available. 2. DS4100 ships with the rail mounting kit and two (mod el 1SC ships with one) 2.8m/9ft intra- rack power cords (IEC 320-C13 to IEC 320-C14). If US power co rd s are required, then orde r the necessary quantity of PN 94G6667.
Chapter 42. TotalStorage DS4100 d isk system 423 TotalStorage DS4100 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc. Refer to the "Othe r Options" table for possible related options 2.
424 CO G Notes: 1. Licensed one per DS4100. 2. Available for DS4100 Dual Controller only. 3. Designed to connect a 1Gb device o r cable to a 2Gb device o r cable.
© Copyright IBM Cor p. 2003, 2006 425 Chapter 43. System Storage DS4200 disk system Notes: 1. DS4200 Model 7V provides two RAID controllers with 1GB Cache each. Ships with the rail mounting kit, four 4GBps SFP transceive rs, and two 2.8m/9ft intra-rack powe r cords (IEC 320-C13 to IEC 320-C14.
426 CO G System Storage DS4200 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc. Refer to the ’Other Options’ table fo r possible related opt.
Chapter 43. System Storage DS420 0 disk system 427 Notes: 1. Option includes two 4Gbps SW SFPs. 42D3272 DS4200 16-64 Storage Partition Upg rade 1 26K7941 SW 4 Gbps SFP Transceiver Pair 1 1 39M5696 1m .
428 CO G.
© Copyright IBM Cor p. 2003, 2006 429 Chapter 44. TotalStorag e DS4300 disk system Table 109. T otalStorage DS 4300 Di sk System At-A- Glance Name Part Number Storage Type HDD Bays (Std/Max) Hot-Swap.
430 CO G Notes: 1. DS4300 - Single Controller provides a single, low-co st RAID controlle r and can be upgraded to DS4300 - Dual Controller. Ships with the rail mounting kit, a 2.8m/9ft intra-rack power cord (IEC 320-C13 to IEC 320-C14) and a 2.8m U.S.
Chapter 44. TotalStorage DS4300 d isk system 431 Notes: 1. Ships with a single Defa ult Host Group which do es not provide stor age partitioning capabilities.
432 CO G TotalStorage DS4300 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc. Refer to the “Othe r Options” table for possible related options. Option Number Description Height Bays Supported Maximum Quantity 06P5762 73.
Chapter 44. TotalStorage DS4300 d isk system 433 TotalStorage DS4300 other options Option Number Description Max Qty 24P8149 DS4300 1st EXP700 Attach 1,16 - 24P8151 DS4300 2nd EXP700 Attach 2,16 - 24P.
434 CO G Notes: 1. License to attach 15 to 28 HDDs. 2. License to attach 29 to 42 HDDs. 3. License kit upgrade to support up to 42 HDDs. 4. License to attach 43 to 56 HDDs. 5. License to attach up to 56 HDDs. 6. Upgrade to support four partitions and prov ides the Novell Netware and Linux Host kits.
© Copyright IBM Cor p. 2003, 2006 435 Chapter 45. TotalStorag e DS4500 disk system Notes: 1. DS4500 provides two RAID controllers with 1GB Cach e ea ch. Ships with rail mounting kit, two 2.8m/9ft intra-rack powe r cords (IEC 320-C13 to IEC 320-C14) and two 2.
436 CO G Figure 95. FAStT900 st orage server TotalStorage DS4500 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc.
Chapter 45. TotalStorage DS4500 d isk system 437 TotalStorage DS4500 other options Notes: 1. Licensed one per DS4500. 2. Requires Storage Manage r v8.4.
438 CO G.
© Copyright IBM Cor p. 2003, 2006 439 Chapter 46. TotalStorag e DS4700 disk system Notes: 1. DS4700 Model 70 provides t wo RAID controllers with 1GB Cache each. Ships with the rail mounting kit, four 4GBps SFP transceive rs, and two 2.8m/9ft int r a- rack power cords (IEC 320-C13 to IEC 320-C14.
440 CO G TotalStorage DS4700 hard disk drive (HDD) storage Notes: 1. External options may require software upg rades, lice nses, etc. Refer to the “Othe r Options” table for possible related options. Option Number Description Height Bays Supported Maximum Quantity 39M4586 73.
Chapter 46. TotalStorage DS4700 d isk system 441 TotalStorage DS4700 other options Notes: 1. Licensed one per DS4700. 2. Option includes two 4Gbps SW SFPs.
442 CO G.
© Copyright IBM Cor p. 2003, 2006 443 Chapter 47. TotalStorag e DS4800 disk system Notes: 1. DS4800 Model 80H provides two RAID controllers wi th 2GB Cache each. Ships with the rail mounting kit, eight 4GBps SFP transceivers, and two 2.8m/9ft intra- rack power co rds (IEC 320-C13 to IEC 320-C14.
444 CO G Notes: 1. DS4800 ships standard with eig ht SFP's which can be used in any of the Host Ports o r Expansion Ports. Up to eight additional SFP's can be or der ed to add full support fo r all ports. Figure 96. DS4800 rear view TotalStorage DS4800 hard disk drive (HDD) storage Notes: 1.
Chapter 47. TotalStorage DS4800 d isk system 445 TotalStorage DS4800 other options Notes: 1. Licensed one per DS4800. 2. Option includes two 4Gbps SW SFPs.
446 CO G.
© Copyright IBM Cor p. 2003, 2006 447 Chapter 48. TotalStorage DS4000 EXP100 storage expansion unit Notes: 1. Attachment to a supported Storage Se rver is required. This expansion u nit does no t attach directly to the serve r. 2. DS4000 EXP100 ships with the rail mounting kit, two 2.
448 CO G TotalStorage DS4000 EXP100 hard disk drive (HDD) options TotalStorage DS4000 EXP100 other options Notes: 1. Designed to connect a 1Gb device o r cable to a 2Gb device o r cable. Option Number Description Height Bays Supported Max Qty FastT SA T A HDDs 39M4570 DS4000 SA T A 400 GB/7200 DDM SL 1 .
© Copyright IBM Cor p. 2003, 2006 449 Chapter 49. TotalStorage DS4000 EXP710 fibre channel storage expansion unit Notes: 1. Attachment to a supported Storage Se rver is required. This expansion u nit does no t attach directly to the serve r. 2. DS4000 EXP710 accommodates up to four, optional, sh ort-wave SFP modules.
450 CO G TotalStorage DS4000 EXP710 hard disk drive (HDD) options TotalStorage DS4000 EXP710 other options Option Number Description Height Bays Supported Max Qty 06P5762 73.4GB 10K rpm 2Gbps FC Disk Module SL 1 ... 14 14 32P0765 146.8GB 10K rpm 2Gbps FC Disk Module SL 1 .
© Copyright IBM Cor p. 2003, 2006 451 Chapter 50. TotalStorage DS4000 EXP810 storage expansion unit Notes: 1. Attachment to a supported Storage Se rver is required. This expansion u nit does no t attach directly to the serve r. 2. DS4000 EXP810 accommodates up to four, optional, sh ort-wave SFP modules.
452 CO G TotalStorage DS4000 EXP810 hard disk drive (HDD) options TotalStorage DS4000 EXP810 other options Option Number Description Height Bays Supported Max Qty 39M4586 73.4GB 10K rpm 2Gbps FC E-DDM Disk Module SL 1 ... 16 16 39M4590 146.8GB 10K rpm 2Gbps FC E-DDM Disk Module SL 1 .
© Copyright IBM Cor p. 2003, 2006 453 Chapter 51. Additional fibre channel components Notes: 1. Provides 10 ports in a 1/2-rack width, 1U high chassis. Ships standard with four sho rt-wave SFP modules, serial cable and a rack powe r cord. 2. Supports sho rt-wave connections only.
454 CO G Notes: 1. Provides 16 ports in a 1U high chas sis. Ships standard with eight sho rt-wave 4 Gbps SFP modules, rac k power co rd and a rail kit. 2. Supports sho r t-wave and long-wave connections. 3. Includes four 4GBps SW SFP transceivers and po rt activation for four po rts.
Chapter 51. Additional fibre channel components 455 Notes: 1. Provides up to 16 ports in a half- rack width chassi s. Ships standard with eight sho rt-wave 4 Gbps SFP modules, and US powe r cord. 2. Currently suppo rts short-wave connections only. 3. Includes eight 4GBps SW SFP transceive rs and port activation fo r eight ports.
456 CO G.
© Copyright IBM Cor p. 2003, 2006 457 Chapter 52. External storage configuration examples The following sample configurations are fo r illustra tion only and may not be suitable for any specific customer ins tallation. Contact your IBM Business Part ner or IBM Marketing Representative fo r assistance with your specific configuration requirements.
458 CO G The following sample configurations are fo r illustra tion only and may not be suitable for any specific customer ins tallation. Contact your IBM Business Part ner or IBM Marketing Representative fo r assistance with your specific configuration requirements.
Chapter 52. External storage configuration examples 459 Figure 99. DS4100 and DS4 300 Drive Attach Examples HBA 1 HBA 2 Host System A HBA 1 HBA 2 Host System B DS4100 1 Gb/s 2 Gb/s X10 X1 Tra y Number.
460 CO G Figure 100. DS4500 Host and Drive Attach Exa mples DS4500 1 Gb/s 2 Gb/s X10 X1 Tra y Number Conflict 1 Gb/s 2 Gb/s X10 X1 Tra y Number Conflict 1 Gb/s 2 Gb/s X10 X1 Tra y Number Conflict 1 Gb.
© Copyright IBM Cor p. 2003, 2006 461 Chapter 53. Rack cabinets and options Table 128. Rack Cabinet s NetBay1 1 Standard Rack S2 25U Standard Rack S2 42U Standard Rack NetBay42 Enterprise Rack Machin.
462 CO G Notes: 1. Conforms to EIA 310 - D Standard 19in rack specification for a Type A cabinet with unive rsal hole spacing. 2. Side stabilizer brackets are included to bolt the cabinet to the floo r. They are needed when a single, standalone cabinet is lightly loaded.
Chapter 53. Rack ca binets and op tions 463 Server system rack alternatives Notes: 1. Rack installation requires appropriate conversion kit. 2. If installed in older IBM racks, the se rver should not be installed behind a glass door that blocks air flow.
464 CO G IBM Rack-Mount ed Units Standard Power Cords 1 Description Machin e Type / Model Size (U) 2 Depth (in ) Approx Weight 3 (lbs) 3 Power (Watts) Typical/Max Number of P/S & Line Cords (Basic.
Chapter 53. Rack ca binets and op tions 465 Notes: 1. Optional rack power co rds: P/N 94G6667 - 14ft NEMA 5-15P; P/N 94G744 8 - 14ft IEC 320-C14. 2. 1U = 1.75in (44.45mm). 3. Weight equals maximum configuration, except fo r the 4559 Tape Enclosures where it is the weight without tape drives.
466 CO G General rack placement rules and other information: • Locate heaviest components at the bottom of the rack (i.e., UPS, then se rvers o r storage, etc. ). • Do not extend more than one component on side rails at a time. • Maximum of th ree UPSs (including no more than two A P C 5000 UPSs) per rack.
Chapter 53. Rack ca binets and op tions 467 Rack Options Option Number Description Information Console Support: 28L4707 Netfinity Rack Keyboard Tray Supports keyboards in racks, also used with Flat Pa.
468 CO G 73P5832 USB Conversion Option Converts the cons ole signals of se rvers with USB and VGA console ports and cable ma nagement arms (on slides) so they can be chained to connect to a Local o r .
Chapter 53. Rack ca binets and op tions 469 2130R30 UPS3000XLV (US) 2U, 120v, 24a, six IEC C13 outlets, 1 NEMA L5-20R outlet, includes L5-20P to L5-15R adapte r, requires one NEMA L5-30R wall receptacle 2130R31 UPS3000XHV (US) 2U, 200-240v, 14.
470 CO G K 2.8 36 36 Left/Right sides of rack to Service Clearance area L 36 60 60 F ront of ra ck to Service Cleara nce area M 30 30 30 Rear of rack to Service Clearance area 9306-1 10 (inches) 9307-.
© Copyright IBM Cor p. 2003, 2006 471 Chapter 54. Rack console options A console consisting of a keyboard, monito r and pointi ng device is required by each serve r for system maintenance and support.
472 CO G Multi-server console switching Refer to the cable labeling key in the Cable Options table appeari ng later in this section..
Chapter 54. Rack console options 473 Refer to the cable labeling key in the Cable Options table appeari ng later in this section..
474 CO G Notes: 1. All switches are RoHS compliant. 2. ARI port is an RJ45 connect or used to connect se rvers with appropriate cons ole cables (Option P/Ns 31R3130, 31R3132); A CT port is an advanced.
Chapter 54. Rack console options 475 Notes: 1. Mounts above 2U console (requires 1U of space). Switch Placement Rules Mounting Locations LCM2 GCM Monitor shelfs witch bay yes no 1U 17in Consoleswitch bay yes no With 2U console 1 yes yes Side-wall compartment yes yes U compartment (EIA space) yes yes Cable Options Label Part Number Description 2.
476 CO G Notes: 1. Short C2T Inte rconnect chaining cable standard with the C2T-capable se rvers. 2. C2T Cable Kit (P/N 06P4792) includes a long C2T chaining cable for us e when interconne cted servers are farther than th ree EIA units apart. 3. PS2 KVM connectors: keyboard 6-pin DIN, mouse 6-pin DIN, video HD-15 V GA.
© Copyright IBM Cor p. 2003, 2006 477 Chapter 55. xSeries rack power configurator Rack Power Product s: Distributed Power Interface (DPI ) Power Distribution Units (PDUs) • DPI 100-127v NEMA PDU .
478 CO G Notes: 1. Each device usually comes with a powe r cord. The PD U requires the powe r cord to have an IEC 320-C14 plug. Order 39Y7932 (14ft) if appropriate co rd is not provided with the device. 2. Each PDU and UPS comes with a country-specific powe r cord.
Chapter 55. xSeries rack power configu rator 479 Typical Rack Power Configurations Notes: 1. Each PDU and UPS comes with a country-specific powe r cord. 2. One 2m internal rack power ca ble provided with DPI Rack PDU. 3. Line cord provided with Front-end PDU.
480 CO G Side-wall Compartment Arrangements Note: The above is intended to show only typical arrangements, not all possible arrangements. C B A U D 9308-42P , X, S, E Enterprise Racks A F E D C B U 93.
Chapter 55. xSeries rack power configu rator 481 Country-specific consider ations: USA, Canada, parts of Latin America, Taiwan Power Load Capacity Part Number Plug T ype Source Circuit (single phase 5.
482 CO G Legend N NEMA PDU with a 12a circuit breaker C Rack PD U with a 15a circuit breaker W FE PDU with a 20a fuse pe r outlet S E PDU with 20a circuit breaker per C19 outlet o r C13 outlet pair or HD PDU with 20a circuit breaker pe r outlet Max leakage current > 3.
Chapter 55. xSeries rack power configu rator 483.
484 CO G Country-specific considerations: Euro pe, Africa, Asia Pacific, parts of Latin America Power Load Capacity Legend C Rack PD U with a 15a circuit breaker W FE PDU with a 20a fuse pe r outlet S.
Chapter 55. xSeries rack power configu rator 485 Power Load Capacity IEC 309-2P+G CEE7-VII SII 32 SABS 164 BS 1363 w/fuse CEI 23-16 etc. @ country specific: 220-240V ac 16a 1 phase various @ 1400W C 2.
486 CO G Country-specific co nsiderations: Japan Power Load Capacity Legend N NEMA PDU with a 12a circuit breaker C Rack PD U with a 15a circuit breaker W FE PDU with a 20a fuse pe r outlet S E PDU with a 20a circuit breaker per C19 outlet o r C13 outlet pair or HD PDU with 20a circuit breaker pe r outlet Max leakage current > 3.
Chapter 55. xSeries rack power configu rator 487.
488 CO G Rack PDU power cables Legend: 1. Device to wall line cord 2. Device to PDU/UPS power cable 3. Rack PDU to wall line cord 4. Rack PDU to Front-end PDU or UPS power cable 5.
Chapter 55. xSeries rack power configu rator 489 PDU power cord plug types Note: Match letters with Key columns in the following char t to identify powe r cables with these plug types.
490 CO G PDU power cables Option Part Number Cable Part Number Plug Type Plug Type Rating (a/v) Cable Length (m/ft) Country/Comments Rack PDUs DPI 100-127V NEMA PDU (US) 39Y8905 - hardwired - NEMA L5- 20P H 15a/ 125v 2.
Chapter 55. xSeries rack power configu rator 491 Front-end PDUs DPI Single-phase 30A Front-end PDU - LV (US) 32P1751 74P4314 Burndy Y NEMA L5- 30P H 30a/ 125v 2.8m/ 9ft US, Canada, Mexico,... DPI Single-phase 30A Front-end PDU - HV (US) 32P1766 74P4312 Burndy Y NEMA L6- 30P J 30a/ 208v 2.
492 CO G DPI Three-phase 380-415V 32A C19 Enterprise PDU (International) 26K4259 25R2552 Burndy Y IEC 309 3P+N+G wye F 32a/ 415v 4.3m/ 14ft Internationa l High Density PDUs DPI Single-phase 208V 60A High Density PDU (US) 73P5855 - hardwired - IEC 309 2P+G C 60a/ 250v 4.
© Copyright IBM Cor p. 2003, 2006 493 Part 2. Appendixes.
494 CO G.
Appendix A. Internal tape drive attributes 495 Appendix A. Internal tape drive attributes Legend FH Full-high - a pproximate height 81 mm/3.2 in HH Half-high - approximate height 41 mm/1.
496 CO G Notes: 1. For installation of an internal tape dr ive in to a se rver, se e the appropriate system section. 2. 1U rack-mounted enclosure that supports one or two half-high tape drives. It allows each of these tape drives to be independently attached to a suppo rted xSer ies server o r both to be daisy-chained to a si ngle serve r.
© Copyright IBM Cor p. 2003, 2006 497 Appendix B. External tape and tape library attributes Installing tape devices on the same bus as othe r devices may impact perf ormance of those devices. External tape drives Notes: 1. Data provided is in the syntax of Native/Compressed.
498 CO G Notes: 1. Data provided is in the syntax of Native/Compressed. 2. 3623-2SX ships with an external 3m SCSI cable (0.8 mm VHDCI -to- 68pin), a 2.8m 100-120v line cord (IEC 320-C13 to NE MA 5-15P), a 4.3m rack power cable and one cleaning cartridge.
Appendix B. External tape and tape librar y attributes 499 Tape libraries SCSI Interface and Cable Le gend F Female - External MM a l e - E x t e r n a l 68 16-bit, 68-pin High Density connecto r 0.8 16-bit, 68-pin Ve ry High Density Connection Inte rface (VHDI) 0.
500 CO G Notes: 1. Transfer rates are for single SCSI channe l configurati ons. Tape Libraries utilizin g split library o r dual host configurations may o btain higher r ates.
Appendix B. External tape and tape librar y attributes 501 Notes: 1. Transfer rates are fo r single SCSI channel configurat ions. Tape Libraries utilizing s plit library o r dual host configurations may obtain higher r ates.
502 CO G Notes: 1. Includes tape library with tape drive, rack mounti ng hardwa re, cleaning cartridge, 125V US power cord, rack to PDU power co rd, and 3m 0.8 mm VHDCI to 68 pin SCSI cable. Notes: 1. Includes tape library with tape drive, rack moun ting hardware, cleaning cartridge, two 125V US power cords, two rack to PDU powe r cord, and 3m 0.
Appendix B. External tape and tape librar y attributes 503 Notes: 1. Includes tape library with tape drive, rack mo unting hardware, one data cartridge, one cleaning cartridge, 125V US powe r cord, and rack to PDU power co rd.
504 CO G Notes: 1. Includes tape library with tape drive, rack mo unting hardware, one data cartridge, one cleaning cartridge, 125V US powe r cord, and rack to PDU power co rd.
Appendix B. External tape and tape librar y attributes 505 Notes: 1. Includes tape library with tape drive, rack mo unting hardware, one data cartridge, one cleaning cartridge, 125V US powe r cord, and rack to PDU power co rd.
506 CO G Notes: 1. Includes tape library with tape drive, rack mo unting hardware, one data cartridge, one cleaning cartridge, 125V US powe r cord, and rack to PDU power co rd.
© Copyright IBM Cor p. 2003, 2006 507 Appendix C. UPS runtime estimate (minutes) Steps to det ermine UPS runtime s and su itable UPS for desi red configurations: 1. Using the 'Power Load Data' table, sum the load (wat ts) of all devices in the configuration.
508 CO G Notes: 1. This table represents general guidelines for select ing the appropriate UPS based on minimum and typical runtime estimates. A ‘maximum configurat ion’ load will result in ‘minimum’ U PS runtime.
Appendix C. UPS runtime estimate (minutes) 509 Notes: 1. Data provided by A PC. Notes: 1. How-to-Read example for 200-240(208): Input V AC is 20 0-240 as is the UPS output when electric se rvice is active. When electric service is interrupted an d the UPS is on batte ry, the UPS output is 208 V AC.
510 CO G 2. Battery output may be set to 22 0, 225, 230 or 240 V AC. 3. Country-specific line co rds available as options. Notes: 1. Data provided by Eaton.
Appendix C. UPS runtime estimate (minutes) 511 Notes: 1. Data provided by Eaton. Table 147. IBM UPS3000HV Runtimes 1 Number of Battery Packs +0 +1 +2 +3 +4 Total Load (Watts) Runtime (Hours / Mi nutes.
512 CO G Notes: 1. How-to-Read example for 200-240(208): Input V AC is 20 0-240 as is the UPS output when electric se rvice is active. When electric service is inte rrupted an d the UPS is on battery, the UPS output is 208 V A C. 2. Battery output may be set to 22 0, 225, 230 or 240 V AC.
Appendix C. UPS runtime estimate (minutes) 513 Notes: 1. Data provided by A PC. Table 149. IBM UPS7500XHV, 10000XHV Runti m es 1 Number of Battery Packs +0 +1 +2 +4 Total Load (Watts) Runtime (Hours/M.
514 CO G Notes: 1. How-to-Read example for 200-240(208): Input V AC is 20 0-240 as is the UPS output when electric se rvice is active. When electric service is inte rrupted an d the UPS is on battery, the UPS output is 208 V A C. 2. Battery output may be set to 208, 2 20, 225, 230 or 240 V AC.
© Copyright IBM Cor p. 2003, 2006 515 Appendix D. System management overview IBM system management solutions allow you to run yo ur business-critical applications using innovative hardware technology that prevents most outages and re cove rs rapidly from the few that do occur.
516 CO G System management support by server Notes: 1. This service processor is integ r ated into the systemboard. 2. This service processor is a PCI adapter. 3. This servi ce processor is a pluggable modul e with a dedicated connecto r. 4. x343 has its own integ rated service process or whic h is not compatible with other service processors.
Appendix D. System management overview 517 System manageme nt functional comparison Table 152. Functio nal Comparison ISMP BMC RSA II R SAII SL Feature/Function Monitoring & Alerting In-band alert.
518 CO G Notes: 1. Requires IBM Director Agent 2. Available via the ASM interconnect or f rom customer LAN with RSAII installed. 3. Not available on e326.
Appendix D. System management overview 519 Cabling rules: 1. Connect the ASM breakout cable to the RSA adapter in the RSAII-host. 2. Using a standard ethernet cable(RJ45), connect one ASM port of RSAII-host's ASM breakout cable to an ASM port of the first ASM-node.
520 CO G 2. RSAII-SlimLine and BMC Management Note: RSAII-SlimLine and BMC management do not su ppo rt a dedicated ASM netwo rk. Management access is via the Custom e r LAN using the appropri ate ASM ethe rnet port. Note: BMC access is shared with a designated system ethe rnet port.
Appendix D. System management overview 521 3. Advanced Sys tem Management Scenario Figure 105. Advanced System Management Scenario Ethernet LAN Remote management console RSAII-host ASM-node with RSAII.
522 CO G.
© Copyright IBM Cor p. 2003, 2006 523 Appendix E. xSeries I/O option attributes Option Number Description Adapter Length PCI Support 1 Low- profile Capable Hot- Plug 2 PCI Voltage Key MHz 1 Storage Controllers 39R8793 ServeRAID-6i+ Controlle r 3 Half 64-bit - - 3.
524 CO G Notes: 1. Adapters rated at a lower frequency than the slots in which they are ins talled will reduce the bus to the frequency of the slowest adapter. 133MHz PCI-X ad apters are backward compatible with 33/66MHz, 64-bit PCI-based se rvers. 2.
Appendix E. xSeries I/O option attributes 525 8. Single Channel Ultra320 SCSI Controller (P/N 71P 8594) provides a single channel with one 68-pin internal connecto r , a four-drop multimode terminated LVD S CSI cable and one external 0.8mm VHDCI connector.
526 CO G.
© Copyright IBM Cor p. 2003, 2006 527 Appendix F. BladeCenter ® power module upgrade guidelines This Technical Update contains info rmation that will help you determine whether to upg rade the power modules in your IBM BladeCenter ® Type 8677 unit when installing IBM BladeCenter blade se rvers or options.
528 CO G BladeCenter power overview Your BladeCen ter un it is separated i nto two powe r domains. Power domain A suppo rts all the BladeCente r modules and bays 1 through 6; powe r domain A uses power modules 1 and 2. Power domain B suppo rts bays 7 through 14 and uses po we r modules 3 and 4.
Appendix F. BladeCenter ® power module upgrade guidelines 529 Important: The HS40 blade serve r occupies two adjacent bays. When y o u c o m p l e t e t h e “ P o w e r w o r k s h e e t s ” o n p a g e 5 3 2 , enter the powe r unit value from Table 154 twice, once fo r ea ch bay that the blad e server occupies.
530 CO G Notes: 1. The SCSI Storage Expansion Unit is not a vailable for the LS20 blade serve r. Upgrade calculation To determine the po wer-module capacity that is nee ded to mai ntain full redundan cy in each power dom ain, complete the following steps.
Appendix F. BladeCenter ® power module upgrade guidelines 531 Important: If the sum of the power unit values in power domain A is greate r than the capacity of the installed power modules, powe r domain A has nonr edundant power. Complete the f ollowing steps: a.
532 CO G DANGER Power distribution unit assessment If your calculations in dicate that you need to upgrade your po wer modules, you will also need to reas sess your power distribution unit (PDU) configuration. U se the IBM BladeCente r Planning an d Installat ion Guide to dete rmine the number an d types of PDUs that you need.
Appendix F. BladeCenter ® power module upgrade guidelines 533 Result: • 7.2 IBM power units < 7.4 IBM powe r units • Two 1200 W power modules will provid e full power redundancy for powe r d omain A Power domain B worksheet ( for power modules 3 an d 4) Result: • 14.
534 CO G.
© Copyright IBM Cor p. 2003, 2006 535 Appendix G. xSeries DC power and NEBS-compliant models The following models, d esigned for the telecommunications industry and ma y utilize DC Po wer and/o r are NEBS compliant. Refer to individual syste m sections for complete configuration details.
536 CO G.
© Copyright IBM Cor p. 2003, 2006 537 Important notices A w i t h dr a w a l d a t e i n d i c a t e s w h e n a n i t e m i s no l o n g er available from IBM. Busine ss Partne r inventory might be available. IBM reserves the right to chang e product specificat ions and to discontinue marketing products without notice.
538 CO G ©IBM Corpo ration 2006. All rights reserved. 3039 Cornwallis Rd. Research Triangle Park, NC 27709 All the part numbers refe renced in this publication are product part numbers and not se rvice part numbers. This publication could contain technical inaccuracies o r typographical e r rors.
.
IBM@ Printed in USA SCOD-3ZVQ5W *07SCOD3ZVQ5W *.
An important point after buying a device IBM SCOD-3ZVQ5W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM SCOD-3ZVQ5W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM SCOD-3ZVQ5W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM SCOD-3ZVQ5W you will learn all the available features of the product, as well as information on its operation. The information that you get IBM SCOD-3ZVQ5W will certainly help you make a decision on the purchase.
If you already are a holder of IBM SCOD-3ZVQ5W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM SCOD-3ZVQ5W.
However, one of the most important roles played by the user manual is to help in solving problems with IBM SCOD-3ZVQ5W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM SCOD-3ZVQ5W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
