Instruction/ maintenance manual of the product HOTR IBM
Go to page of 13
z/TPF HOTX Driver (HOTR/HOTS/HS64) User's Guide © Copyright IBM Corp. 2006.
This page intentionally left blank. Last Updated 6/5/2006 2 HOTX Driver User's Guide © Copyright IBM Corp. 2006.
ZTEST HOTR/HOTS/HS64 The HOTX driver suite contains the HOTR, HOTS and HS64 drivers. The HOTR driver tests the TPF DASD supports by creating a 'hot record' (default using #HOTREC ) to blast channels and test cache. The instances created by the HOTR driver stresses the DASD system by repeatedly finding and filing the ‘hot record’.
STOp stops the driver on the ordinal number specified. STAT queries the status of the ordinal number specified. FIleadd uses the address specified as the address of the ‘hot record’. Note: The FILEADDR parameter overrides the FACID pa rameter. FAcid uses the FACE ID specified as the FACE ID of the ‘hot record’.
HOTS/HS64 Format >>--ZTEST--+----+----- --+--HOT S-+---------------------------------------> ' - i -' ' --HS64-' .- Ordinal-0-.
All indicates to use all record ordinal numbers defined (i.e. 0x00-0x13 ). This parameter cannot be specified with the FILEADDR parameter. FCt specifies functional test mode. NOFCt specifies system test mode. Help displays the correct syntax of the command.
BSOs HS64 driver segment qht6.asm app_drvs.mak QHT6 Called by QHT1 when HOTS is running HOTS driver segment qht3.asm app_drvs.mak QHT3 HOTS driver segment qht2.asm app_drvs.mak QHT2 HOTR driver segment qht1.asm app_drvs.mak QHT1 HOTR driver segment qht0.
GETCC D7 FILNC D7 WAITC y STATE 6: No VFA buffer y STATE 7: VFA-S lock pending, BCA queue, use D4/D5 CRUSA FINDC FINDC y STATE 8: VFA-S lock pending, no BCA queue, use D5 CRUSA FINDC y STATE 9: VFA bu.
SERVICE 6: FILSC VS=YES, RID=xx SERVICE 7: FILUC VS=YES, RID=xx SERVICE 8: FILUC VS=NO RID=xx SERVICE 9: UNFRC VS=NO RID=xx SERVICE 10: UNFRC VS=YES RID=xx SERVICE 11: FINHC VS=YES RID=0 SERVICE 12: F.
ZTEST HOTR START HOTR0009I Driver started for FACE ID: #HOTREC ordinal: 00000000+ ZTEST 2 HOTR START HOTR0009I Driver started for FACE ID: #HOTREC ordinal: 00000000+ ZTEST HOTR START O-4 HOTR0009I Dri.
ZTEST HOTR START O-14 HOTR0002E Ordinal number too high- must be 0x0-0x13+ ZTEST HOTR START FILEADD-00000000CC03A802 O-1 BPKD0061E 07.33.16 ZHOTR, TOO MANY CHARACTERS IN FILEADD PARAMETER+ Normal Cases: (HOTS/HS64) ZTEST HOTS HELP CSMP0099I 09.28.09 010000-B ZTEST HOTS HELP+ CSMP0097I 09.
The file-count is: 00007913 Snippets active - last was STATE: 0004 SERVICE: 0001 This record is not running EHT This record is running SVT Mode+ ZTEST HOTR STAT HOTR0030I STATUS was requested for FACE ID #HOTREC Ordinal 00000000+ CSMP0097I 16.
References For more information about reading syntax diagrams, also referred to as railroad diagrams, see Accessibility information in the TPF Product Information Center.
An important point after buying a device IBM HOTR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IBM HOTR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IBM HOTR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IBM HOTR you will learn all the available features of the product, as well as information on its operation. The information that you get IBM HOTR will certainly help you make a decision on the purchase.
If you already are a holder of IBM HOTR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IBM HOTR.
However, one of the most important roles played by the user manual is to help in solving problems with IBM HOTR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IBM HOTR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
