Instruction/ maintenance manual of the product TS 355 Husqvarna
Go to page of 48
1 Operator’s manual Read these instructions carefull y and mak e sure you understand them bef ore using the TS 355. Manuel d’utilisation V euillez lire attentiv ement ces instructions et assur ez-vous de V euillez lire attentiv ement ces instructions et assur ez-vous de bien les comprendr e a vant d’utiliser la machine modèle FS 4800.
2 EVER Y MACHINE IS THOROUGHL Y TESTED BEFORE LEA VING THE F ACTOR Y . EACH MACHINE IS SUP- PLIED WITH A COPY OF THIS MANUAL. OPERA TORS OF THIS EQUIPMENT MUST READ AND BE F AMIL- IAR WITH THE SAFETY W ARNINGS. F AILURE TO OBEY W ARNINGS MA Y RESUL T IN INJUR Y OR DEA TH.
3 SYMBOL DEFINITIONS DEFINICIÓN DE SIMBOLOS • Please read the instructions for use prior to operating the machine for the rst time. • Antes de la puesta en marcha, lea detenidamente las instrucciones y familiaricese con la máquina.
4 • Motor Off • Parar El Motor • Use In Well V entilated Area • Usar En Una Área Bien V entilada • Do Not Use In Flammable Areas • No Usar In Áreas Inamables • Machinery Hazard, Keep Hands And Feet Clear .
5 • Dangerously High Noise Level • Nivel De Ruido Elevadamente Peligroso • Pay Extreme Attention T o The Care And Protection Of The Machine Before Starting Up • Ponga Extrema Atención Al Cuid.
6 • Number of Revolutions Per Minute, Rotational Speed • N° De Revoluciones Por Minuto, V elocidad De Rotación • Blade Flange Diameter • Diámetro De La Brida De La Hoja • Machine Mass (lb.
7 DECAL DESCRIPTIONS AND LOCA TIONS DESCRIPCIÓN DE CALCAMONIAS Y UBICACIONES P/N 169065 Location: Mufer (Qty . 1) Gas Models P/N 542 17 75-88 Location: Blade Guard (Qty . 1) All Models P/N 542 04 63-26 Location: Motor (Qty . 1) Electric Models 542 19 07-33 Location: Front of Pan, Belt Guard, All Models (Qty .
8 Specications MODEL NO. TS 355 TS 355 TS 355 TS 355 G TYPE 1-1/2 HP-1 15V Electric 2 HP Electric 3 HP Electric 5.5 HP Gasoline Blade Guard Capacity 10 - 14" (250 - 350 mm) 10 - 14" (250 - 350 mm) 10 - 14" (250 - 350 mm) 14" Only (350 mm) Blade Shaft RPM: 2509 2509 2509 2950 Max.
9 Saw Dimensions ELECTRIC MODEL FIGURE A SAW DIMENSIONS ELECTRIC MODELS (Figure A) GASOLINE MODEL (Figure B) Item Length (cm) Description Item Length (cm) Description A 38.2" (97.0) Saw Length (Maximum) A 43.6" (1 10.7) Saw Length (Maximum) B 19.
10 SAFETY FIRST! W ARNINGS DO’ s AND DO NOT’ s W ARNING: F AILURE TO COMPL Y WITH THESE W ARNINGS AND OPERA TING INSTRUCTIONS COULD RESUL T IN DEA TH OR SERIOUS BODIL Y INJUR Y . DO read this entire operator ’s manual before operating this machine.
1 1 SAFETY FIRST! W ARNINGS DO’ s AND DO NOT’ s W ARNING: F AILURE TO COMPL Y WITH THESE W ARNINGS AND OPERA TING INSTRUCTIONS COULD RESUL T IN DEA TH OR SERIOUS BODIL Y INJUR Y . DO NOT This saw was designed for certain applications only . DO NOT modify this saw or use for any application other than for which is it was designed.
12 FIGURES.
13.
14 Parts Identication: A. Pan Weldment B. Head Platform Assembly C. Conveyor Cart Assembly D. Folding Stand (Optional) E. Skid Kit (Optional) F . Foot Pedal Kit (Optional) G. Bearing Clamps H. Bearings I. ——————————— J. Pivot Blocks K.
15 PRE OPERA TION CHECKLIST Before leaving our factory , every machine is thoroughly tested. Follow our instructions strictly and your machine will give you long service in normal operating conditions. Before starting up the machine, make sure you read this entire Operation’ s Manual and are fa- miliar with the operation of the machine.
16 The operator must wear protective clothing appropriate to the work he is doing. Any persons not involved in the work should leave the area. Use only blades marked with a maximum opera ting sp eed gre ater th an the b lade sh aft speed. Use: W et or Dry sawing of masonry and refractory materi - als such as brick and block.
17 • Pivot the left and right Bearing Clamps (G) into their up - per position, and tighten the Knobs (K) [or Capscrews (K) depen din g on th e dat e of man ufa ctu re] unti l the He ad Platform (B) is secured to Pan Weldment (A) (FIG.
18 All Models: • The blade rotates in a “down-cut” direction. This means that the front of the blade is moving downward while the rear of the blade is moving upward. Mount the Diamond Blade (DD) so that the arrow on the blade rotates in this “down-cut” direction.
19 CUTTING OPERA TIONS: • Pla ce ma ter ial on Conv eyo r Car t (C) an d mov e con vey or cart to the front of the saw so that the blade DOES NOT contact the material. • Cutting Methods: This unit allows three methods for the blade to contact the material: 1.
20 W A R N I N G : B e f o r e p e r f o r m i n g a n y main tena nce , AL W A YS loca te the machin e on a level surface with the engine / motor OFF , and the start switch in the OFF position, or power source disconnected. After each use: CLEAN the machine.
21 material placed on the Cart Assembly (C). If the saw or Head Platform Assembly (B) is dropped or damaged the blade could become mis-aligned so that it no longer cuts “squarely” through the material. If this occurs the blade shaft should be re-aligned so that the saw will produce “square” cuts.
22 The manufacturer accepts no responsibility caused by unsuitable useormodications. The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy , we reserve the right to make any and all technical modications without prior notice.
23 NOTE: NOT A:.
24 ESPECIFICACIONES MODELO NO. TS 355-15 TS 355-2 TS 355-3 TS 355 G TIPO 1-1/2 HP , Eléctrico 2 HP , Eléctrico 3 HP , Eléctrico 5,5 HP , A Gasolina Capacidad del Protector de la Hoja: 10 - 14".
25 MODELOS ELECTRICOS FIGURA A MODELOS A GASOLINA FIGURA B DIMENSIONES DE LA SIERRA DIMENSIONES DE LA SIERRA MODELOS ELECTRICOS (Illustración A) MODELOS A GASOLIA (Illustración B) Artículo Longitud.
26 ¡SEGURIDAD ANTE TODO! ADVERTENCIAS HACER y NO HACER ADVERTENCIA: EL NO RESPET AR EST AS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRA VES LESIONES O LA MUERTE. SI Lea todo el manual antes de manejar esta máquina. Entienda todas las advertencias, instrucciones y controles.
27 ¡SEGURIDAD ANTE TODO! ADVERTENCIAS HACER y NO HACER ADVERTENCIA: EL NO RESPET AR EST AS ADVERTENCIAS E INSTRUCCIONES DE OPE- RACION PUEDE PROVOCAR GRA VES LESIONES O LA MUERTE. NO haga funcionar esta máquina sin antes haber leído y entendido este manual.
28 FIGURAS.
29.
30 IdenticacióndePiezas: A. Estructura Soldada de la Bandeja B. Conjunto de Plataforma del Cabezal C. Conjunto del Carro T ransportador D. Soporte Doblable (Opcional) E. Equipo de Patín (Opcional) F . Equipo de Pedal de Pie (Opcional) G. Abrazaderas de Cojinete H.
31 LIST A DE COMPROBACIONES PREVIAS A LA OPERACION Antes de salir de la fábrica, todas las máquina son probadas extensivamente. Siga nuestras instrucciones al pie de la letra y su máquina le brindará muchos años de servicio en condiciones normales de trabajo.
32 Estos avisos le dan consejos para su seguridad Antes de salir de la fábrica, todas las máquinas son probadas extensivamente. Si g a nu es t ra s i n st r uc c io n es a l p ie d e l a le t ra y s u máquina le brindará muchos años de servicio en condiciones normales de trabajo.
33 • Asegúrese que las Abrazaderas de Cojinete (G) de la derecha y de la izquierda en la Estructura Soldada de la Bandeja (A) están pivotadas dentro de su posición rebajada (V er la Ilustracion 3).
34 ADVERTENCIA: Asegúrese que la unidad esté conectada a un tomacorriente apropiadamente conectado a tierra. ¡El incumplimiento de esta advertencia podría resultar en serias lesiones coprporales o la muerte! Modelo a Gasolina Solamente: • Combustible: V erique el manual de operación del motor .
35 T odos los Modelos: (Ilustraciones 5 y 6) • Congure la sierra para el tipo de operación requerida, húmeda o en seco. Note que la sierra está montada en fábrica para operación húmeda.
36 • Si el motor se apaga durante el corte, verique lo si - guiente: Modelo Eléctrico: 1. Interrupción de la conexión eléctrica: V erique todas las conexiones eléctricas.
37 ADVERTENCIA: Antes de efectuar cualquier mant eni mien to, SIEMP RE ubi que la máquin a en una sup er ci e niv el ada , co n el moto r AP AG ADO y la perilla de encendido en la posición AP AGA- DO, o desconectado de la fuente de energía. Después de cada uso: LIMPIAR la máquina .
38 1. Asegúrese que el Carro T ransportador (C) ruede libre - mente a lo largo de la bandeja. Si la bandeja se daña, ella debe ser reparada o reemplazada antes que la hoja pueda ser alineada. T rabe el Conjunto de Plataforma del Cabezal (B), de manera segura, en una posición horizontal.
39 Para una pronta provisión de piezas de repuesto, es esen - cial que se proporcionen los datos mostrados en la Placa de Número de Serie (TT) (V er la Ilustracion 10) jada a la máquina.
40 Wiring Diagram: 1-1/2 HP Electric Motor S.V . Wiring Diagram: 1-1/2 HP Electric Motor D.V ..
41 Wiring Diagram: 2 HP Electric Motor Wiring Diagram: 2 HP Electric Motor - 50Hz.
42 Wiring Diagram: 3 HP Electric Motor Wiring Diagram: 3 HP Electric Motor.
43 Wiring Diagram: 5.5 HP Honda See Engine Operation Manual.
44 NOTE: NOT A:.
45 NOTE: NOT A:.
46 NOTE: NOT A:.
47 DUST W ARNING Cutting, especially when DR Y cutting, generates dust that comes from the material being cut, which frequently contains silica . Silica is a basic component of sand, quartz, brick clay , granite and numerous other minerals and rocks.
48 2006-28 542 20 11-04.
An important point after buying a device Husqvarna TS 355 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husqvarna TS 355 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husqvarna TS 355 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husqvarna TS 355 you will learn all the available features of the product, as well as information on its operation. The information that you get Husqvarna TS 355 will certainly help you make a decision on the purchase.
If you already are a holder of Husqvarna TS 355, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husqvarna TS 355.
However, one of the most important roles played by the user manual is to help in solving problems with Husqvarna TS 355. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husqvarna TS 355 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
